Articles
  • Enhancing micromachining precision with novel electrolyte combinations: an investigation

  • Sudharsan Gunasekarana,*, Suresh Periyagounderb and Magibalan Subramaniamc

  • aAsst. Professor, Mechatronics Engineering, Sona College of Technology, Salem, India
    bProfessor, Mechatronics Engineering, Sona College of Technology, Salem, India
    cAssociate Professor, Mechanical Engineering, Nandha Engineering College, Erode, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. M.K. Külekcý, Mater Technol. 47[1] (2013) 105-109.
  •  
  • 2. R. Santhanakrishnana, V.S. Thangarasu, R. Aravind and V. Ramachandiran, J. Ceram. Process. Res. 24[1] (2023) 174-181.
  •  
  • 3. M.V.A. Ramakrishna and S.V. Rao, Mater Today: Proc. 46[2] (2021) 934-939.
  •  
  • 4. H. Hocheng, Y.H. Sun, S.C. Lin, and P.S. Kao, J .Mater. Proc. Tech. 140[1] (2003) 264-268.
  •  
  • 5. M. Tajdari and S. Chavoshi, Cent. Eur. J. Eng. 3[3] (2013) 466-474.
  •  
  • 6. S. Ayyappan and K. Sivakumar, Int. J. Adv. Manuf. Technol. 82[9] (2016) 2053-2064.
  •  
  • 7. J.R. Gamage and A.K.M. DeSilva, Procedia CIRP. 26 (2015) 385-390.
  •  
  • 8. G.S. Prayogo and N. Lusi, IOP Conf. Ser.: Mater. Sci. Eng. 494 (2019) 012055.
  •  
  • 9. Y. Zhang, N. Qu, X. Fang, and X. Wang, J. Manuf. Process. 37 (2019) 488-495.
  •  
  • 10. N. Rajan, R. Thanigaivelan, and K.G. Muthurajan, J. New Mater. Electrochem. 21[4] (2018) 239-242.
  •  
  • 11. A. Jerin and K. Karunakaran, Mater Today Proc. 81[2] (2023) 443-448.
  •  
  • 12. S. Hinduja and M. Kunieda, CIRP Annals. 62[2] (2013) 775-797.
  •  
  • 13. M.K. Das, K. Kumar, T.Kr. Barman and P. Sahoo, Procedia Mater Sci. 6 (2014) 741-751.
  •  
  • 14. B. Bhattacharyya, J. Munda and J. Mater Process Technol. 140 (2003) 287-291.
  •  
  • 15. K.M. Senthilkumar, A. Sivakumar, Shivajic. Rohokale Milind, S.K. Tamangd, and M. Giriraj, J. Ceram. Process. Res. 23[2] (2022) 233-236.
  •  
  • 16. S. Rajaa, K. Vignesh, M. Ravikumar, and R. Sanjeevi, J. Ceram. Process. Res. 24[1] (2023) 153-157.
  •  
  • 17. N. Ravikumara, R. Vijayanb, and R. Viswanathan, J. Ceram. Process. Res. 24[1] (2023) 142-152.
  •  
  • 18. P. Singh, A. Pramanik, A.K. Basak, C. Prakash, and V. Mishra, Int. J. Adv. Manuf. Technol. 106 (2020) 2133-2166.
  •  
  • 19. R. Thirumalai, S. Karthick, and M. Giriraj, J. Ceram. Process. Res. 23[2] (2022) 221-227.
  •  

This Article

  • 2023; 24(4): 705-713

    Published on Aug 31, 2023

  • 10.36410/jcpr.2023.24.4.705
  • Received on May 11, 2023
  • Revised on Jul 1, 2023
  • Accepted on Jul 6, 2023

Correspondence to

  • Sudharsan Gunasekaran

  • Asst. Professor, Mechatronics Engineering, Sona College of Technology, Salem, India
    Tel : +91 9363308848

  • E-mail: sansudhar@hotmail.com