Articles
  • Neural intelligence and regression analysis in modeling and optimization of flank wear during turning of Monel K500

  • N. Manoj Krishnaa,*, M. Selvarajb, Arul Kulandaivelc and S. Lakshmana Kumard

  • aDepartment of Mechanical Engineering, Thangavelu Engineering College, Chennai-600097, India
    bDepartment of Mechanical Engineering, SSN College of Engineering, Chennai-603110, India
    cDepartment of Mechanical Engineering, Agni College of Technology, Chennai-600130, India
    dDepartment of Mechanical Engineering, Sona College of Technology, Salem-636005, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Aykut Eser, Elmas Askar Ayyıldız, Mustafa Ayyıldız, and Fuat Kara(short name), Adv. Mat. Sci. Eng. (2021) 1-14.
  •  
  • 2. M.V. Ramana, G.K.M. Rao, B. Sagar, R.K. Panthangi, and B.V. Raja Ravi Kumar, Clean. Eng. Tech. 2 (2021) 100034.
  •  
  • 3. E. García-Martínez, V. Miguel, A. Martínez-Martínez, M.C. Manjabacas, and J. Coello, Materials 14 (2021) 4868.
  •  
  • 4. T. Segreto, D. Addona, and Teti, Prod. Eng. Res. Deel. 14 (2020) 693-705.
  •  
  • 5. S. Selvakumar, V.S. Sreebalaji, and K. Ravikumar, Mat. Manuf. Proc. 36 (2021) 792-802.
  •  
  • 6. R.U. Baig, S. Javed, M. Khaisar, M. Shakoor, and P. Raja, Adv. Mech. Eng. 13 (2021) 1-14.
  •  
  • 7. S.H. Chen and C.H. Hsu, Inter. J. Adv. Manuf. Tech. 116 (2021) 3795-3808.
  •  
  • 8. A. Kosarac, C. Mladjenovic, M. Zeljkovic, S. Tabakovic, and M. Knezev, Materials 15 (2022) 700.
  •  
  • 9. M.S. Surya, G. Prasanthi, A.K. Kumar, V.K. Sridhar, and S.K. Gugulothu, Int. J. Inter. Des. Manuf. (2021) 453-462.
  •  
  • 10. M. Adineh and H. Doostmohammadi, SN Appl. Sci. 3 (2021) 100.
  •  
  • 11. T. Segreto, D. Addona, and R. Teti, Prod. Eng. Res. Deve. 14 (2020) 693-705.
  •  
  • 12. Z. Jurkovic, G. Cukor, and M. Brezocnik, J.Intell. Manuf. 29 (2018) 1683-1693.
  •  
  • 13. J. Francis Xavier, B. Ravi, D. Jayabalakrishnan, C. Ezilarasan, V. Jayaseelan, and G. Elias, J. Nan. Mate. (2021) 1-11.
  •  
  • 14. C. Ezilarasan, V.S. Senthil Kumar, A. Velayudhama, and K. Palanikumar, Int. J. Precision Tech. 2 (2011) 1-14.
  •  
  • 15. K. Arul and V.S. Senthil Kumar, Mat. Manuf. Proc. 35 (2020) 405-414.
  •  
  • 16. K. Arul and V.S. Senthil Kumar, J. Bal. Trib. Assoc. 26 (2020) 589-600.
  •  
  • 17. A. Kulandaivel and S. Kumar, Mach. Sci. Technol. 24[5] (2020) 810-836.
  •  
  • 18. M. Abolfazli and M.H. Paydar, J. Ceram. Process. Res. 23[2] (2022) 188-198.
  •  
  • 19. T. Ramanathan and M. Vivekraj, J. Ceram. Process. Rese. 23[2] (2022) 228-232.
  •  
  • 20. K.M. Senthilkumar, A. Sivakumar, R.M. Shivaji, S.K. Tamang, and M. Giriraj, J. Ceram. Process. Res. 23[2] (2022) 233-236.
  •  
  • 21. S.Karthick, V.Paramasivam, Mohanavel Vinayagam, and Arul Kulandaivel, J. Ceram. Process. Res. 23[3] (2022) 278-286.
  •  
  • 22. Yan Cherng Lin, Jung Chou Hung, Han Ming Chow, and A Cheng Wang, J. Ceram. Process. Res. 16[2] 249-257 (2015).
  •  

This Article

  • 2022; 23(5): 656-665

    Published on Oct 31, 2022

  • 10.36410/jcpr.2022.23.5.656
  • Received on Mar 13, 2022
  • Revised on May 28, 2022
  • Accepted on Jun 4, 2022

Correspondence to

  • N. Manoj Krishna

  • Department of Mechanical Engineering, Thangavelu Engineering College, Chennai-600097, India
    Tel : +919543081037 Fax: 044-24911255

  • E-mail: manojphd17@gmail.com