Articles
  • Parameter optimization in Laser Beam Welding for Incoloy 825 Ni-based alloy and AISI 316L steel

  • S. Srikantha, A. Parthibanb,*, M. Ravikumarc and K. Vigneshd

  • aResearch Scholar, Department of Mechanical Engineering, Vels Institute of Science, Technology & Advanced Studies Pallavaram,Chennai – 600117
    bAssociate Professor, Department of Mechanical Engineering, Vels Institute of Science, Technology & Advanced Studies. Pallavaram, Chennai - 600117
    cProfessor, Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam – 638401
    dAssistant Professor, Department of Mechanical Engineering, PSNA College of Engineering and Technology, Dindigul – 624622

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. J. Kangazian, and M. Shamanian, J. Manuf. Process.26 (2017) 407-418.
  •  
  • 2. J. Kangazian, M. Shamanian, and A. Ashrafi, J. Manuf. Process. 29 (2017) 376-388.
  •  
  • 3. D. Aravindkumar, and R. Thirumalai, Mater. Res. Express 8[4] (2021) 046513.
  •  
  • 4. S. Sharma, M. Chandrasekaran, and R. Thirumalai, Manuf. Technol. Today 13[6] (2014) 20-29.
  •  
  • 5. J.P. Oliveira, N. Schell, N. Zhou, L. Wood, and O. Benafan, Mater. Des. 162 (2019) 229-234.
  •  
  • 6. N. Sayyar, M. Shamanian, and B. Niroumand, J. Mater. Process. Technol. 262 (2018) 562-570.
  •  
  • 7. N.R. Bijivemula, and G. Padmanabhan, Adv. Mater. Process. Technol. (2021) 1-16.
  •  
  • 8. N. Kumar, M. Mukherjee, and A. Bandyopadhyay, Opt. Laser Technol. 94 (2017) 296-309.
  •  
  • 9. N. Ghosh, P.K. Pal, and G. Nandi, ProcediaTechnol. 25 (2016) 1038-1048.
  •  
  • 10. M.R. Pakmanesh, and M. Shamanian, Opt. Laser Technol. 99 (2018) 30-38.
  •  
  • 11. P.G. Krishnan, B.S. Babu, and K. Siva, J. Ceram. Process. Res. 21[2] (2020) 157-163.
  •  
  • 12. P.G. Krishnan, B.S. Babu, S. Madhu, S.J. Gowrishankar, C. Bibin, S. Saran, S.S. Ram, A.R. Hari and S. Vidyasagar, J. Ceram. Process. Res. 22[5] (2021) 483-9.
  •  
  • 13. M. Kannaiyan, J.G. Raghuvaran, K. Govindan and E.P. Annamalai, J. Ceram. Process. Res. 21[1] (2020) 26-34.
  •  
  • 14. R. Crushan and P. AshokaVarthanan, J. Ceram. Process. Res. 22[6] (2021) 620-628.
  •  

This Article

  • 2022; 23(4): 523-528

    Published on Aug 31, 2022

  • 10.36410/jcpr.2022.23.4.523
  • Received on Jan 21, 2022
  • Revised on May 27, 2022
  • Accepted on Jun 4, 2022

Correspondence to

  • A. Parthiban

  • Associate Professor, Department of Mechanical Engineering, Vels Institute of Science, Technology & Advanced Studies. Pallavaram, Chennai - 600117
    Tel : +9578961066

  • E-mail: parmathi83@gmail.com