Articles
  • Multiobjective optimization process of Ti6Al4V alloy using MWCNTs dispersed cutting fluid in turning operation

  • Senthil Kumar La,*, Savadamuthu Lb and Manivel Cc

  • aSNS College of Engineering, Coimbatore, Tamilnadu, India 641 107
    bSNS College of Technology, Coimbatore, Tamilnadu, India 641 035
    cNehru Institute of Engineering and Technology, Coimbatore, Tamilnadu, India 641 105

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. C. Veiga, J.P. Davim, and A.J.R. Loureiro, Rev. Adv. Mater. Sci. 34 (2013) 148-164.
  •  
  • 2. K.H. Hashmi, G. Zakria, M.B. Raza, and S. Khalil. Int. J. Adv. Manuf. Tech. 85[5-8] (2016) 1847-1856.
  •  
  • 3. R.S. Revuru, J.Z. Zhang, N.R. Posinasetti, and T. Kidd, Int. J. Adv. Manuf. Tech. 95[1-4] (2018) 1451-1463.
  •  
  • 4. S. Pervaiz, S. Anwar, I. Qureshi, and N. Ahmed, Int. J. Pres. Eng. And Manuf. Green tech. 6[1] (2019) 133-145.
  •  
  • 5. A.K. Sharma, R.K. Singh, A.R. Dixit, and A.K. Tiwari,, J. of Manuf. Proc. 30[1] (2017) 467-482.
  •  
  • 6. C. Chanakyan and S. Sivakumar, J. Ceram. Process. Res. 21[6] (2020) 647-655.
  •  
  • 7. S. Lei and W. Liu, Int. J. of Machine Tool & Manuf. 42 (2002) 653-661.
  •  
  • 8. D. Yang and Z. Liu, Int. J. of Ref. Metals and Hard Mat. 51 (2015) 192-200.
  •  
  • 9. R. Thirumalai, J.S. Senthilkumar, P. Selvarani, and S. Ramesh in Proceeding of the Inst. of Mech Eng, Part C: J. of Mech. Eng. Sci. 227[9] (2013) 1889-1897.
  •  
  • 10. P. Bacha, G. Trmalb, P. Zemana, and J. Vanaa, Jan Malya in Procedia on 5th Conference on 2012, (2012) 226-231.
  •  
  • 11. M.k. Gupta, P.K. Sood, and V.S. Sharma, J. of Cleaner Prod. 135 (2016) 1276-1288.
  •  
  • 12. M. Li, T. Yu, L. Yang, H. Li, and R. Zhang, Int. J. of Adv. Manuf. Tech. Springer Verlag Lonton Ltd, Part of Nature, (2017).
  •  
  • 13. C. Manivel, Digest J. of Nanomat. and Biostruc 15[3] (2020) 809-814.
  •  
  • 14. S. Bruschi, R. Bertolini, A. Bordin, F. Medea, and A. Ghiotti, Tribo. Int. [102] (2016) 133-142.
  •  
  • 15. P. Mutharasu and M. Kathiresan, J. Ceram. Process. Res. 22[6] (2021) 697-704.
  •  
  • 16. S. Pervaiz, S. Anwar, I. Qureshi, and N. Ahmed, Int. J. of Prec. Eng. and Manuf. Green Tech. 6 (2019) 135-145.
  •  
  • 17. W. Wang, J. of Cleaner Prod. (2018) 209.
  •  
  • 18. N.M. Prabhu, P. Maniiarasan, S. Nalliusamy, and S. Jeevanatham, Int. J. of nono manuf. 16[1] (2020) 61-75.
  •  
  • 19. A.K. Sharma, A.k. Tiwari, and A.R. Dixit , J. of Cleaner Prod. 127 (2016) 1-18.
  •  
  • 20. R. Thirumalai, J.S. Senthilkumar, P. Selvarani, R.M. Arunachalam, and K.M. Senthilkumar, Aus J. of Mech Eng, 10[2] (2012) 157-168.
  •  
  • 21. R.K. Sigh, A.K. Sharma, A.R. Dixit, A. Tiwari, A. Pramanik, and A. Mandal, J. of Cleaner Prod. 162 (2017) 830-845.
  •  
  • 22. T. Pridhar, K. Ravikumar, B. Sureshbabu, R. Srinivasan, and B. Sathiskumar, J. Ceram. Process. Res. 21[2] (2020) 131-142.
  •  
  • 23. R. Dharamalingam, K.K. Sivagnanaprabhu, B. S. Kumar, and R. Thirumalai, Proceedia Eng. 97 (2014) 1434-1441.
  •  
  • 24. R. Thirumalai and J.S. Senthilkumar, J. of Mech. Sci. and Tech. 27[4] (2013) 1109-1116.
  •  
  • 25. D. Tang, H.B. Lim, K.J. Lee, S.J. Ha, K.B. Kim, M.W. Cho, K. Park and W.S. Cho, Int. J. Ceram. Process. Res. 14[5] (2013) 610-615.
  •  
  • 26. B. Singaravel and T. Selvaraj, J. of Adv. Manuf. Sys. 15[1] (2016) 1-11.
  •  
  • 27. R. Thirumalai, M. Seenivasan, and K. Paneerselvam, Mat. Today Proc. Elsv. 45 (2021) 467-472.
  •  
  • 28. K. Aslantas, E.Ekici, and A. Cicek, Measurement 128 (2018) 419-427.
  •  
  • 29. D. R. Shah and S.N. Bhavsar, Int. J. of Data Network Sci. 3 (2019) 291-304.
  •  
  • 30. M. Srinivasan, S. Ramesh, S. Sundaram, and R. Viswanathan, Int. J. Ceram. Process. Res. 22[3] (2021) 345-355.
  •  
  • 31. J. Kumar and T. Soota, Mat. Today: Proc. 21 (2019) 1544-1550.
  •  
  • 32. L. Tang and Y.T. Du, Mat. and Manuf. Proc. 29[5] (2014) 507-513.
  •  
  • 33. K.M. Senthil Kumar, T. Ramanathan, S. Murugasan, and V. Thangamuthu, Int. J. Ceram. Process. Res. 22[6] (2021) 731-738.
  •  
  • 34. N. Li, Y. Chen, and D. Kong, Adv. Manuf. 7 (2019) 142-154.
  •  
  • 35. G. Liu, C. Li, Y. Zhang, M. Yang, D. Jia, X. Zhang, S. Guo, R. Li, R. Li, and H. Zhai, Mat. and Manuf. Proc. 33 (2018) 950-963.
  •  
  • 36. L. Shakeel Ahamed, Int. Proceeding of the ASME 2016, International Mechanical Engineering Congress and Ex- position IMECE-2016, [11-17] (2016), Phoenix, Arizonaa, USA.
  •  
  • 37. B. Suresh Babu, G. Chandramohan, C. Boopathi, T. Prithar, and R. Srinivasan, Int. J. Cerm. Process. Res. 19[1] (2018) 69-74.
  •  

This Article

  • 2022; 23(4): 476-489

    Published on Aug 31, 2022

  • 10.36410/jcpr.2022.23.4.476
  • Received on Jan 22, 2022
  • Revised on Apr 8, 2022
  • Accepted on Apr 19, 2022

Correspondence to

  • Senthil Kumar L

  • SNS College of Engineering, Coimbatore, Tamilnadu, India 641 107
    Tel : +91-9789648980

  • E-mail: kls.senthillogu@gmail.com