Articles
  • Equation chapter 1 section 1 investigation, analysis, optimization of reciprocating wire-cut electrical discharge machining of titanium alloy with molybdenum electrode

  • Anoop Johny* and C. Thiagarajan

  • Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, Tamil Nadu, India – 602105

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. .-P. Davim, in “Machining of Hard Materials” (Springer London, 2000) p.1.
  •  
  • 2. D. Mala, N. Senthilkumar, B. Deepanraj, and T. Tamizharasan, in “Green Materials and Advanced Manufacturing Technology: Concepts and Application” (CRC Press, Taylor and Francis, 2021) p. 75.
  •  
  • 3. S. Thirumalvalavan and N. Senthilkumar, C. R. Acad. Bulg. Sci. 72[5] (2019) 665-674.
  •  
  • 4. J. Perry, in “Titanium Alloys: Types, Properties, and Research Insights” (Nova Science Publishers, 2016) p. 1.
  •  
  • 5. Y.-F, Guo, P.J. Hou, L.X. Sun, L. Wang, and Z.F. Li, in Advanced Materials Research (Trans Tech Publications, 2013) p. 2490.
  •  
  • 6. F. Nourbakhsh, K.P. Rajurkar, A.P. Malshe, and J. Cao, Procedia CIRP, 5 (2013) 13-18.
  •  
  • 7. G. Huang, W. Xia, L. Qin, and W. Zhao, Procedia CIRP, 68 (2018) 126-131.
  •  
  • 8. X. Chen, Z. Wang, J. Xu, Y. Wang, J. Li, and H. Liu, J. Cleaner Prod. 188 (2018) 1-11.
  •  
  • 9. X. Chen, Y. Wang, Z. Wang, H. Liu, and G. Chi, Procedia CIRP 68 (2018) 120-125.
  •  
  • 10. M.U. Farooq, M.A. Ali, Y. He, A.M. Khan, C.I. Pruncu, M. Kashif, N. Ahmed, and N. Asif, J. Mater. Res. Technol. 9[6] (2020) 16186-16201.
  •  
  • 11. A. Kumar A, V. Kumar, and J. Kumar, Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf. 228[8] (2014) 880-901.
  •  
  • 12. V. Gohil and Y.M. Puri, Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf. 232[9] (2018) 1603-1614.
  •  
  • 13. C. Leyens and M. Peters, in “Titanium and Titanium Alloys: Fundamentals and Applications” (Wiley, 2006) p.1.
  •  
  • 14. J.C. Williams, in “Titanium and Titanium Alloys: Scientific and Technological Aspects” (Springer US, 2013) p.1.
  •  
  • 15. S. Ponnuvel and N. Senthilkumar, Int J Rap Manuf. 8[1-2] (2019) 95-122.
  •  
  • 16. V. Muthukumar, A.S. Babu, R. Venkatasamy, and N.S. Kumar, J Inst. Eng (Ind). Series C 96[1] (2014) 49-56.
  •  
  • 17. J. Wang, T. Wang, H. Wu, and F. Qiu, Int J Adv Manuf Technol 91 (2017) 3285-3297.
  •  
  • 18. I. Maher, A.A.D. Sarhan, and H. Marashi, in “Comprehen- sive Materials Finishing” (Elsevier, 2017) p.231.
  •  
  • 19. A. Johny and C. Thiagarajan, Mater. Today:. Proc. 33[7] (2020) 2581-2584.
  •  
  • 20. M. Saravanan, C. Thiagarajan, and S. Somasundaram, ARPN J. Eng. Appl. Sci. 15[24] (2020) 3100-3112.
  •  
  • 21. R. Chaudhari, J.J. Vora, V. Patel, L.N. López de Lacalle, and D.M. Parikh, Materials 13 (2020) 4943.
  •  
  • 22. G. Taguchi and Y. Yokoyama, in “Taguchi Methods: Design of Experiments” (ASI Press, 1993) p.123.
  •  
  • 23. P.J. Ross, in “Taguchi techniques for quality engineering” (Tata McGraw Hill, New Delhi, 2005) p.95.
  •  
  • 24. B. Deepanraj, L.A Raman, N. Senthilkumar, and J. Shivasankar, FME Transactions, 48[2] (2020) 383-390.
  •  
  • 25. D.C. Montgomery, in “Design and Analysis of Experi- ments” (John Wiley & Sons, Inc., New York, 2013) p.115.
  •  
  • 26. N. Senthilkumar, T. Ganapathy, and T. Tamizharasan, Aust. J. Mech. Eng. 12[2] (2014) 233-246.
  •  
  • 27. T. Tamilanban, T.S. Ravikumar, C. Gopinath, and S. Senthilrajan, J. Ceram. Process. Res. 22[6] (2021) 629-635.
  •  
  • 28. T. Tamizharasan, N. Senthilkumar, V. Selvakumar, and S. Dinesh, SN Appl. Sci. 1[2] (2019) 160.
  •  
  • 29. Sivaperumal M, Thirumalai R, Kannan S, and Yarrapragada K S S Rao, J. Ceram. Process. Res. 23[3] (2022) 404-408
  •  
  • 30. Y.-C. Lin, J.-C. Hung, H.-M. Chow, and A.-C Wang, J. Ceram. Process. Res. 16[2] (2015) 249-257.
  •  
  • 31. K. Palanikumar, J. Reinf. Plast. Compos. 25[16] (2006) 1739-1751.
  •  
  • 32. M. Srinivasan, S. Ramesh, S. Sundaram, and R. Viswanathan, J. Ceram. Process. Res. 22[3] (2021) 345-355.
  •  
  • 33. P.G. Krishnan, B.S. Babu, and K. Siva, J. Ceram. Process. Res. 21[2] (2020) 157-163.
  •  
  • 34. N. Senthilkumar and T. Tamizharasan, Arabian J. Sci. Eng., 39[6] (2014) 4963-4975.
  •  
  • 35. C.-L. Hwang and K. Yoon, in “Multiple Attribute Decision Making: Methods and Applications A State-of-the-Art Survey” (Springer-Verlag, New York, 1981) p.58.
  •  
  • 36. C.K. Dhinakarraj, J. Shivasankar, and N. Senthilkumar, Int. J. Veh. Struct. Syst. 12[2] (2020) 150-156.
  •  
  • 37. V. Monica, G. Kakshmikanth, S. Lathicashree, N. Senthilkumar, A. Muniappan and B. Deepanraj, Int. J. Mech. Prod. Eng. Res. Devel. 9 (2019) 46-59.
  •  
  • 38. B. Singaravel and T. Selvaraj, Tehničkivjesnik 22[6] (2015) 1475-1480.
  •  
  • 39. P. Chandramohan, S. Murugesan, and S. Arivazhagan, J. Appl. Fluid Mech. 10 (2017) 293-306.
  •  
  • 40. H.C. Liao, Int. J. Adv. Manuf. Technol. 27 (2006) 720-725.
  •  
  • 41. D.R. Joshua and A. Jegan, J. Ceram. Process. Res. 23[1] (2022) 69-78.
  •  
  • 42. R. Thirumalai, M. Seenivasan, and K. Panneerselvam, Mater. Today:. Proc. 45 (2020) 267-272.
  •  
  • 43. M. Clerc, in “Particle Swarm Optimization” (Wiley, 2013) p.1.
  •  
  • 44. P. Erdogmus, in “Particle Swarm Optimization with Applications” (IntechOpen, 2018) p.1.
  •  
  • 45. G. Lindfield and J. Penny, in “Introduction to Nature-Inspired Optimization” (Elsevier Science, 2017) p.49.
  •  
  • 46. B.K. Panigrahi, Y. Shi, in “Handbook of Swarm Intelli- gence: Concepts, Principles and Applications” (Springer Berlin Heidelberg, 2011) p.63.
  •  
  • 47. T. Chaudhary, A.N. Siddiquee, and A.K. Chanda, Def. Technol. 15[4] (2019) 541-544.
  •  
  • 48. S.A. El-Bahloul, SN Appl. Sci. 2 (2020) 49.
  •  
  • 49. M. Kumar, S.K. Tamang, D. Devi, M. Dabi, K.K. Prasad, and R. Thirumalai, J. Ceram. Process. Res. 23[3] (2022) 373-382.
  •  
  • 50. V. Muthukumar, N. Rajesh, R. Venkatasamy, A. Sureshbabu, and N. Senthilkumar, Procedia Mater. Sci. 6 (2014) 1674-1682.
  •  
  • 51. M. Kolli and A. Kumar, Eng. Sci. Technol. Int. J. 18[4] (2015) 524-535.
  •  
  • 52. S. Habib and A. Okada, J. Mater. Process. Technol. 227 (2016) 147-152.
  •  
  • 53. N. Senthilkumar and T. Tamizharasan, Aust. J. Mech. Eng. 13[1] (2015) 31-45.
  •  
  • 54. N. Senthilkumar, T. Tamizharasan, and V. Anandakrishnan, Meas. 58 (2014) 520-536.
  •  
  • 55. G. Gamst, L.S. Meyers, and A.J. Guarino, in “Analysis of Variance Designs - A Conceptual and Computational Approach with SPSS and SAS” (Cambridge University Press, 2008) p.1.
  •  
  • 56. P. Muthurasu and M. Kathiresan, J. Ceram. Process. Res. 22[6] (2021) 697-704.
  •  
  • 57. T. Pridhar, K. Ravikumar, B. Sureshbabu., R. Srinivasan, and B. Sathishkumar, J. Ceram. Process. Res. 21[2] (2020) 131-142.
  •  
  • 58. V. Selvakumar, S. Muruganandam, T. Tamizharasan, and N. Senthilkumar, Sadhana, 41[10] (2016) 1219-1234.
  •  
  • 59. A.K. Rouniyar and P. Shandilya, J. of MateriEng and Perform 29 (2020) 7981-7992.
  •  
  • 60. A. Pramanik, A.K. Basak, and C. Prakash, Heliyon, 5 (2019) e01473.
  •  

This Article

  • 2022; 23(4): 443-458

    Published on Aug 31, 2022

  • 10.36410/jcpr.2022.23.4.443
  • Received on Jan 4, 2022
  • Revised on Feb 5, 2022
  • Accepted on Feb 10, 2022

Correspondence to

  • Anoop Johny

  • Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, Tamil Nadu, India – 602105
    Tel : +9994466797

  • E-mail: anoopjohny85@gmail.com