Articles
  • Sintering technology and properties of permeable bricks prepared using manganese tailings

  • Jieguang Songa,b, Xueqing Yangc,*, Ping Chena,*, Rongjin Liua, Deping Luod, Jing Lic
    and Jingjing Liuc

  • aGuangxi Key Laboratory of New Energy and Building Energy Saving, Guilin University of Technology, Guilin 541004, China
    bSponge City Research Institute of Pingxiang University, Pingxiang 337055, China
    cKey Laboratory for Industrial Ceramics of Jiangxi Province, Pingxiang University, Pingxiang 337055, China
    dJiangxi Pingxiang Longfa Enterprise Co., Ltd., Pingxiang 337022, China

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. L. Zeng, H.J. Sun, T.J. Peng, and W.M. Zheng, Waste Manag. 106 (2020) 184-192.
  •  
  • 2. D. Liu, M. Edraki, P. Fawell, and L. Berry, Powd. Tech. 364 (2020) 604-621.
  •  
  • 3. J.M. Lu, D. Dreisinger, and T. Gluck, Hydrometallurgy 161 (2016) 45-53.
  •  
  • 4. N. Duan, Z.G. Dan, F. Wang, C.X. Pan, C. Zhou, and L.H. Jiang, J .Clean. Prod. 19[17-18] (2011) 2082-2087.
  •  
  • 5. S.K. Wahono, A. Cavallaro, K. Vasilev, and A. Mierczynska, Environ. Pollut. 240 (2018) 725-732.
  •  
  • 6. T. Yamashiro, K. Morita, and K. Nakajima, Magn. Reson. Imag. 63 (2019) 170-177.
  •  
  • 7. M. Lei, L. Tang, H. Du, L. Peng, B. Tie, P. N Williams, and G. Sun, Process Safety Environ. Prot. 125 (2019) 334-341.
  •  
  • 8. R. Ortiz-Soto, D. Leal, C. Gutierrez, A. Aracena, A. Rojo, and H.K. Hansen, J. Hazard. Mater. 365 (2019) 905-911.
  •  
  • 9. Z.J. Wu, X.F. Wu, Z.H. Yang, and L.N. Ouyang, Ecolog. Mode. 346 (2017) 20-29.
  •  
  • 10. R.A. Ribeiro, T.C. Giannini, M. Gastauer, M. Awade, and J.O. Siqueira, J. Environ. Manag. 227 (2018) 386-394.
  •  
  • 11. Z.J. Wu, X.F. Wu, Z.H. Yang, and L.N. Ouyang, Ecolog. Mode. 374 (2018) 14-21.
  •  
  • 12. O. Santos, C. Carvalho, G. Silva, and C. Santos, J. Environ. Manag. 147 (2015) 314-320.
  •  
  • 13. B.W. Tang, S. Gao, Y.G Wang, X.M Liu, and N. Zhang, Const. Build. Mater. 208 (2019) 697-709.
  •  
  • 14. X.L. Yuan, Y.Z. Tang, Y. Li, Q.S. Wang, J. Zuo, and Z.L. Song, J. Clean. Prod. 171 (2018) 198-208.
  •  
  • 15. C.Q. Zhou, Const. Build. Mater. 188 (2018) 850-859.
  •  
  • 16. M.G. Zhu, H. Wang, L. Liu, R. Ji, and X.D. Wang, Const. Build. Mater. 148 (2017) 484-491.
  •  
  • 17. Y. Liu, X.Q. Yang, K.L. Peng, Q. Wang, J. Huang, Z. Zhang, J. Lu, H. Xu, J.G. Song, and L. Chen, J. Ceram. Process. Res. 20 (2019) 436-441.
  •  
  • 18. M.H. Xu, J.G. Song, R.H. Wang, S.B. Li, N. Wang, S.Y. Yu, H.X. Yan, T.T. Xiao, and F. Chen, Key. Eng. Mater. 697 (2016) 178-181.
  •  

This Article

  • 2021; 22(3): 283-288

    Published on Jun 30, 2021

  • 10.36410/jcpr.2021.22.3.283
  • Received on May 11, 2020
  • Revised on Sep 24, 2020
  • Accepted on Oct 2, 2020

Correspondence to

  • Xueqing Yang c, Ping Chen a

  • aGuangxi Key Laboratory of New Energy and Building Energy Saving, Guilin University of Technology, Guilin 541004, China
    cKey Laboratory for Industrial Ceramics of Jiangxi Province, Pingxiang University, Pingxiang 337055, China
    Tel : +86 799 6682251 Fax: +86 799 6682171

  • E-mail: 45102808@qq.com, 215760540@qq.com