Articles
  • Tribological properties of Al 413 alloy hybrid metal matrix composites processed by melt stirred squeeze casting

  • R. Srinivasana,*, M. Kamarajb, N. Dhasarathanc and M. Naga Swapna Srid

  • aDepartment of Mechanical Engineering, KGiSL Institute of Technology, Coimbatore, India
    bDepartment of Mechanical Engineering, College of Engineering and Technology, SRM Institute of Science and Technology, Kattankulathur, India
    cDepartment of Electronics and Communication Engineering, Saveetha School of Engineering, SIMATS, Chennai, India
    dDepartment of Mechanical Engineering, Department of Mechanical Engineering, Prasad V Potluri Siddhartha Institute of Technology, Vijayawada, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. I.A. Ibrahim, F.A. Mohamed, and E.J. Lavernia, J. Mater. Sci. 26 (1991) 1137-1156.
  •  
  • 2. J. Hashi, L.Looney, and M.S.J. Hashmi, J. Mater. Process. Technol.92-93 (1999) 1-7.
  •  
  • 3. T.T. Long, T. Nishimura, T. Aisaka, M. Ose, and M. Morita, Trans. Jpn. Inst. Met. 29 (1998) 920-927.
  •  
  • 4. H.C. Park, Scr. Metall. Mater. 27 (1992) 465-470.
  •  
  • 5. J.I. Song and K.S. Han, Compos. Struct. 39 (1997) 309-318.
  •  
  • 6. K. Umanath, S.T. Selvamani, and K. Palanikumar, Int. J. Eng. Sci. Technol. 3 (2011) 5441-5451.
  •  
  • 7. A. Devaraju, A. Kumar, and B. Kotiveerachari, Trans. Nonferrous Met. Soc. China 23 (2103) 1275-1280.
  •  
  • 8. Adem Onat, J. Alloys Compd. 489 (2010) 119-124.
  •  
  • 9. R.K. Uyyuru, M.K. Surappa, and S. Brusethaug, Wear 260 (2006) 1248-1255.
  •  
  • 10. M. Ramachandra, and K. Radhakrishna, Wear 262 (2007) 1450-1462.
  •  
  • 11. R.N. Rao and S. Das, Mater. Des. 32 (2011) 1066-1071.
  •  
  • 12. P. Ravindran, K. Manisekar, P. Rathika, and P. Narayanasamy, Mater. Des. 45 (2013) 561-570.
  •  
  • 13. R. Srinivasan, B. Suresh Babu, P. Prathap, Ruban Wenish, R. Soundararajan, and G. Chandramohan, J. Ceram. Process. Res. 22[1] (2021) 16-24.
  •  
  • 14. T. Pridhar, K. Ravikumar, B. Sureshbabu, R. Srinivasan, and B. Sathishkumar, J. Ceram. Process. Res. 21[2] (2020) 131-142.
  •  
  • 15. M. Übeyli, R.O. Yildirim, and B. Ögel, Mater. Des. 28[4] (2007) 1257-1262.
  •  
  • 16. Muhammad Shahida, Rizwan Ahmed Malika,, Hussein Alrobeib, Jaehwan Kimc, Muhammad Latifc, Azhar, Hussaina, Muhammad Uzair Iqbala, and Azeem Hafizb, J. Ceram. Process. Res. 22[2] (2021)149-157
  •  
  • 17. S. Balasivanandha Prabu, L. Karunamoorthy, S. Kathiresan, and B. Mohan, J. Mater. Process. Technol.171 (2006) 268-273.
  •  
  • 18. K.M. Shorowordi, T. Laoui, A.S.M.A. Haseeb, J.P. Celis, and L.Froyen, J. Mater. Process. Technol. 142[3] (2003) 738-743.
  •  
  • 19. J. Singh, S.K. Goel, V.N.S Mathur, and M.L. Kapoor, J. Mater. Sci. 26 (1991) 2750-2758.
  •  
  • 20. G. Prashant, Karandikar, and Tsu-Wei Chou, J. Mater. Sci. 26 (1991) 2573-2578.
  •  
  • 21. S.Q. Wu, H.Z. Wang, and S.C. Tjong, Comp. Sci. Tech. 56 (1996) 1261-1270.
  •  
  • 22. Ali Mazahery, Mohsen Ostad Shabani, Composites: Part B 43 (2012) 1302-1308.
  •  
  • 23. M. Uthayakumar, S. Aravindan, and K. Rajkumar, Mater. Des. 47 (2013) 456-464.
  •  
  • 24. Sivaperumal, M., R. Thirumalai, S. Kannan, and Yarrapragada KSS Rao, J. Ceram. Process. Res. 23[3] (2022) 404-408.
  •  
  • 25. S. Vinothkumar and P. Senthilkumar, J. Ceram. Process. Res. 23[4] (2022) 546-552.
  •  
  • 26. K.M. Senthilkumar, A. Sivakumar, Rohokale Milind Shivaji, S.K. Tamang, and M. Giriraj, J. Ceram. Process. Res. 23[2] (2022) 233-236.
  •  

This Article

  • 2026; 27(1): 105-112

    Published on Feb 28, 2026

  • 10.36410/jcpr.2026.27.1.105
  • Received on Oct 5, 2025
  • Revised on Nov 11, 2025
  • Accepted on Dec 1, 2025

Correspondence to

  • R. Srinivasan

  • Department of Mechanical Engineering, KGiSL Institute of Technology, Coimbatore, India
    Tel : +91 9444201734

  • E-mail: coersrinivasan@gmail.com