Articles
  • Fiber laser micro machining of stainless steel - process parametric optimization by integrated taguchi and grey relation analysis technique

  • C. Gopinatha,*, S.D. Dhanesh Babub and S. Kanthasamya

  • aDepartment of Mechanical Engineering, St Joseph College of Engineering, Sriperumbudur, Kanchipuram, Tamilnadu-602 117, India
    bDepartment of Mechanical Engineering, Chennai Institute of Technology, Chennai, Tamilnadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. X. Luo, W. Chang, and J. Sun, Micromachines 9 (2018) 564.
  •  
  • 2. S.Z. Chavoshi and X. Luo, Precis. Eng. 41 (2015) 1-23.
  •  
  • 3. Y. Cai, W. Chang, and X. Luo, Precis. Eng. 52 (2018) 266-275.
  •  
  • 4. K. You, G. Yan, and X. Luo, J. Manuf. Process. 58 (2020) 677-692.
  •  
  • 5. Zhao, H. Wang, and X. Liu, Front. Mech. Eng. 12 (2017) 155.
  •  
  • 6. H. Kim, J. Lee, and H. Nam, Micro Nano Syst. Lett. 9 (2021).
  •  
  • 7. Z. Yang, J. Li, J. Zhang, and Q. Chen, RSC Adv. 12 (2022) 33660.
  •  
  • 8. S. Bruening, K. Du, M. Jarczynski, and A. Gillner, J. Laser Appl. 32 (2020) 012003.
  •  
  • 9. S. Gunasekaran, S. Periyagounder, and M. Subramaniam, J. Ceram. Process. Res. 24, (2023) 705.
  •  
  • 10. K.T. Metz, F. Civelek, and A. Zimmermann, Micromachines 16 (2025) 606.
  •  
  • 11. Yi Qin, A. Brockett, Y. Ma, A. Razali, J. Zhao, C. Harrison, W. Pan, X. Dai, and D. Loziak, Int. J. Adv. Manuf. Technol. 47 (2010) 821.
  •  
  • 12. Y. Zhang, Z. Zhang, D. Liu, J. Wu, Y. Huang, and G. Zhang, J. Adv. Res. 30 (2021) 39.
  •  
  • 13. N. Ackerl, M. Warhanek, J. Gysel, and K. Wegener, J. Eur. Ceram. Soc. 39 (2019)1635.
  •  
  • 14. M. Hajri, J. Pfaff, H. Buettner, M. Voegtlin, R. Kaufmann, and K. Wegener, Procedia CIRP 77 (2018) 654.
  •  
  • 15. B. Jaeggi, S. Remund, R. Streubel, B. Goekce, S. Barcikowski, and B. Neuenschwander, J. Laser Micro/Nanoeng. 12 (2020) 267.
  •  
  • 16. S. Xu and X. Wang, J. Therm. Stresses 46 (2023) 345.
  •  
  • 17. M.H. Abidi, M.K. Mohammed, M.K. Aboudaif, and H. Alkhalefah, Adv. Mech. Eng. 14[1] (2022) 6.
  •  
  • 18. S. Sivaraos, M.S. Kasim, M.A. Md Ali, R.I.R. Abdullah, and T.J.S. Anand, J. Mater. Sci.: Mater. Eng. 10 (2015) Art. 2.
  •  
  • 19. O.F. Ugbine, O.B. Akhabue, P.O. Blessing, A.-B.S. Mobisayo, J.O. Egbunu, and V.O. Dauda, World J. Adv. Res. Rev. 23 (2024) 744.
  •  
  • 20. S. Anand, J. Res. Mech. Eng. 7 (2021) 1.
  •  
  • 21. A. Nigade, A.S. Nemade, N.A. Argiddi, S.S. Anjarlekar, and P.P. Kharche, J. Emerg. Technol. Innov. Res. 8 (2021) 1.
  •  
  • 22. U. Brauch, C. Röcker, T. Graf, and M.A. Ahmed, Appl. Phys. B 128 (2022) Art. 58.
  •  
  • 23. Y. Yan, Y. Zheng, H. Sun, and J. Duan, Front. Phys. 9 (2021) 669591.
  •  
  • 24. J. Han, J. Zhang, X. Shan, H. Peng, and L. Wang, Chin. Opt. Lett. 20 (2022) 081401.
  •  
  • 25. F. Preusch, B. Adelmann, and R. Hellmann, Micromachines 5 (2014) 1051.
  •  
  • 26. M.A.N. Rashid, T. Saleh, W.I. Noor, and M.S. Mohamed Ali, Int. J. Adv. Manuf. Technol. 114 (2021) 709-723.
  •  
  • 27. D.J. Kotadiya, J.M. Kapopara, A.R. Patel, C.G. Dalwadi, and D.H. Pandya, Mater. Today Proc. 5 (2018) 5384-5390.
  •  
  • 28. T. Muthuramalingam, R. Akash, S. Krishnan, N.H. Phan, V.N. Pi, and A.H. Elsheikh, J. Manuf. Process. 62 (2021) 1-6.
  •  
  • 29. A. Patel and S.N. Bhavsar, Mater. Today Proc. 43 (2021) 28-35.
  •  
  • 30. S.A. Bagherzadeh, M. Shamsipour, M.J. Kholoud, and M.H. Razavi Dehkordi, J. Laser Appl. 33 (2021) 012056.
  •  
  • 31. M. Shafaie, M. Khademi, M. Sarparast, and H. Zhang, Int. J. Adv. Manuf. Technol. 123 (2022) 4385-4398.
  •  
  • 32. S. Kanthasamy and T.S. Ravikµmar, Aust. J. Mech. Eng. 21 (2021) 1198-1217.
  •  
  • 33. S. Kanthasamy and T.S. Ravikµmar, Aust. J. Mech. Eng. 22 (2022) 652-665.
  •  
  • 34. N. Haghdadi, C. Ledermueller, H. Chen, Z. Chen, Q. Liu, X. Li, G. Rohrer, X. Liao, S. Ringer, and S. Primig, Mater. Sci. Eng. A 846 (2022) 142695
  •  
  • 35. S. Patra, A. Agrawal, A. Mandal, and A.S. Podder, Trans. Indian Inst. Met. 74 (2021) 1089-1098.
  •  
  • 36. T. Kar, S.S. Deshmukh, S. Datta, and A. Goswami, Materials Today: Proceedings 82 (2023) 96-102.
  •  
  • 37. C.A. Biffi, N. Lecis, B. Previtali, M. Vedani, and G.M. Vimercati, Int. J. Adv. Manuf. Technol. 54 (2011) 149-160.
  •  
  • 38. K. Venkata Rao, L. Suvarna Raju, G. Suresh, J. Ranganayakulu, and J. Krishna, Opt. Laser Technol. 169 (2024) 110146.
  •  
  • 39. K. Rajesh, R.V. Murali Krishnam Raju, S. Rajesh, and N. Sudheer Kumar Varma, Mater Today: Proc. 18 (2019) 2065-2072.
  •  
  • 40. I. Buj-Corral, L. Costa-Herrero, and A. Domínguez-Fernández, Metals 11 (2021) 1224:1-13.
  •  
  • 41. B.S. Wardhana, K. Anam, R.M. Ogana, and A. Kurniawan, IOP Conf. Ser.: Mater. Sci. Eng. 494 (2019) 012041.
  •  
  • 42. S. Pattanayak and S.K. Sahoo, Opt. Fiber Technol. 63 (2021) 102479.
  •  
  • 43. Y.A. Turkkan, M. Aslan, A. Tarkan, Aslan, C. Yavuz, and N. Yavuz, Metals 13 (2023) 132:1-13.
  •  
  • 44. S. Pattanayak, S.K. Panda, and D. Dhupal, J. Manuf. Process. 52 (2020) 220-234.
  •  
  • 45. G.R. Ravanneswarran, L. Poovazhagan, S. Santosh, and M.P. Ananth, Mater. Manuf. Process. 40 (2025) 1183-1196.
  •  
  • 46. S. Jain and V. Parashar, Mater. Manuf. Process. 36 (2021) 1701-1724,
  •  
  • 47. J.F. Liu and Y.B. Guo, Procedia Manuf. 1 (2015) 904-914.
  •  
  • 48. C.A. Biffiy, J. Fiocchi, and A. Tuissi, J. Mater. Res. Technol. 19 (2022) 472-506.
  •  
  • 49. N. Haghdadi, C. Ledermueller, H. Chen, Z. Chen, Q. Liu, X. Li, G. Rohrer, X. Liao, S. Ringer, and S. Primig, Mater. Sci. Eng. A 846 (2022) 142695.
  •  
  • 50. Z. Ouyang, J. Wang, H. Su, X. Wang, Y. Xie, and T. Wu, J. Mater. Eng. Perform. 33 (2024) 12682-12690.
  •  
  • 51. W. Chuaiphan and L. Srijaroenpramong, J. Adv. Join. Process. 1 (2020) 100016.
  •  
  • 52. H. Vashishtha, R.V. Taiwade, S. Sharma, and A.P. Patil, J. Manuf. Process. 25 (2017) 49-59.
  •  
  • 53. Agrawal and D. Kamble, J. Braz. Soc. Mech. Sci. Eng. 41 (2019) 4.
  •  
  • 54. S. Patra, A. Agrawal, A. Mandal, and A.S. Podder, Trans. Indian Inst. Met. 74 (2021) 1089-1098.
  •  
  • 55. B. Somasundaram, K.T. Anand, D. Kirubakaran, P. Ganesh, S. Kannan, A.H. Seikh, and A. Ghosh, J. Ceram. Process. Res. 24 (2023) 626-633.
  •  
  • 56. K. Rajesh Kumar, K.K. Dama, and V. Venkatasatyanarayana, J. Ceram. Process. Res. 25 (2024) 151-158.
  •  
  • 57. P.P. Shantharaman, V. Anandakrishnan, S. Sathish, and M. Ravichandran, J. Ceram. Process. Res. 23 (2022) 589-594.
  •  
  • 58. K. Rajesh Kumar, K.K. Dama, and V.V. Satyanarayana, J. Ceram. Process. Res. 24 (2023) 439-445.
  •  
  • 59. S. Murugesan, V. Thangamuthu, R.M. Shivaji, and R. S. Kµmar, J. Ceram. Process. Res. 23[3] (2022) 367-372.
  •  
  • 60. T. Tamilanban, T.S. Ravikµmar, C. Gopinath, and S. Senthilrajan, J. Ceram. Process. Res. 22 (2021) 629-635.
  •  
  • 61. P. Saravana Kumar, S. Kumar, S. Pradeep, T.Y. Badgujar, B. Krishnaveni, G. Mahendran, D. Poosapadi, M. Premalatha, G.S.V. Seshu Kumari, and K.K. Arun, J. Ceram. Process. Res. 26 (2025) 502-506.
  •  
  • 62. R. Prakash, R. Thirumalai, K. Venkatesh, and C. Natarajan, J. Ceram. Process. Res. 26 (2025) 280-285.
  •  
  • 63. T. Suresh, P. Suresh, and M. Prabu, J. Ceram. Process. Res. 25 (2024) 192-201.
  •  

This Article

  • 2025; 26(5): 870-885

    Published on Oct 31, 2025

  • 10.36410/jcpr.2025.26.5.870
  • Received on Jul 7, 2025
  • Revised on Jul 25, 2025
  • Accepted on Aug 13, 2025

Correspondence to

  • C. Gopinath

  • Department of Mechanical Engineering, St Joseph College of Engineering, Sriperumbudur, Kanchipuram, Tamilnadu-602 117, India
    Tel : +91-7845992376

  • E-mail: gopinath.chr@gmail.com