Articles
  • Parametric optimization for maximization of material removal rate in turning of mild steel using taguchi six sigma technique

  • Senthil Kumar Natarajana,*, Karthick Sekarb, Dhanenderan Natesanc and Senthil Kumar Kuppuswamid

  • aDepartment of Mechanical Engineering, Ganesh College of Engineering, Salem, India
    bDepartment of Mechanical Engineering, Excel Engineering College, Komarapalayam, India
    cDepartment of Automobile Engineering, Government College of Engineering, Erode, India
    dDepartment of Agricultural Engineering, Nehru Institute of Technology, Coimbatore, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. T. Palaniappan and P. Subramaniam, Mater. Today Comm. 38 (2024) 108425.
  •  
  • 2. C. Mgbemena, G. Etebenumeh, and F. Ashiedu, Niger. J. Technol. 35[4] (2016) 847-854.
  •  
  • 3. R. Butola, Jitendrakumar, Vaibhavkhanna, P. Ali, and V. Khanna, Mater. Today Proc. 4[8] (2017) 7892-7902.
  •  
  • 4. J. Lv, R. Tang, W. Tang, S. Jia, Y. Liu, and Y. Cao, J. Cleaner Prod. 193 (2018) 128-139.
  •  
  • 5. S. Dinesh, K. Rajaguru, and V. Vijayan, Mech. Mech. Eng. 20[4] (2016) 451-466
  •  
  • 6. D.B. Arulappan and V. Durairaj, Matéria (Rio de Janeiro), 29[4] (2024) e20240255.
  •  
  • 7. G. Narendranath and J. Udaya prakash, Mater. Today. Proc. 92[1] (2023) 424-429.
  •  
  • 8. M. Kumar, S.K. Tamang, D. Devi, M. Dabi, K.K. Prasad, and R. Thirumalai, J. Ceram. Process. Res. 23[3] (2022) 373-382.
  •  
  • 9. K. Fuat, B. Nurettin, and A. Mahir, Eng. Sci. 26 (2023) 961.
  •  
  • 10. S. Poria, P. Sahoo, and G. Sutradhar, Silicon. 8 (2016) 591-599.
  •  
  • 11. M.W. Azizi, O. Keblouti, L. Boulanouar, and M.A. Yallese, Struct. Eng. Mech. 73[5] (2020) 501-513.
  •  
  • 12. S.R.G. Krishnan, P. Muthiah, and M. Jaganathan, Matéria (Rio de Janeiro) 28[2] (2023) e20230086.
  •  
  • 13. M.N. Akhtar, T. Sathish, V. Mohanavel, A. Afzal, K. Arul, M. Ravichandran, I.A. Rahim, S.S.N. Alhady, E.A. Bakar, and B. Saleh, Materials (Basel) 14[16] (2021) 4470.
  •  
  • 14. T. Singh, V.K. Sharma, M. Rana, K. Singh, and A. Saini, Mater. Today Proc. 50[2] (2022) 2288-2293.
  •  
  • 15. M. Mia, P.R. Dey, M.S. Hossain, M.T. Arafat, M. Asaduzzaman, M.S. Ullah, and S.M.T. Zobaer, Measurement 122 (2018) 380-391.
  •  
  • 16. P.J. Reddy and D. Vinodh, J. Phys. Conf. Ser. 2484 (2023) 012037.
  •  
  • 17. S. Kumar, S. Gurusamy, V. Sivakumar and S.M. Vaiyapuri, J. Ceram. Process. Res. 23[6] (2022) 869-877.
  •  
  • 18. M. Sivaperumal, R. Thirumalai, S. Kannan, and Y.K.S. S. Rao, J. Ceram. Process. Res. 23[3] (2022) 404-408.
  •  
  • 19. R. Thirumalai, J.S. Senthilkumaar, P. Selvarani, and S. Ramesh, Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci. 227[9] (2013) 1889-1897.
  •  
  • 20. R. Thirumalai, J.S. Senthilkumaar, P. Selvarani, R.M. Arunachalam, and K.M. Senthilkumaar, Aust. J. Mech. Eng. 10[2] (2012) 157-168.
  •  

This Article

  • 2025; 26(5): 864-869

    Published on Oct 31, 2025

  • 10.36410/jcpr.2025.26.5.864
  • Received on Jul 23, 2025
  • Revised on Aug 11, 2025
  • Accepted on Sep 2, 2025

Correspondence to

  • Senthil Kumar Natarajan

  • Department of Mechanical Engineering, Ganesh College of Engineering, Salem, India
    Tel : +91 9994322766

  • E-mail: Senthilnatarajanpdd@gmail.com