Articles
  • Experimental investigation and process parameters optimization for abrasive water jet machining using desirability function analysis

  • Balasubramaniam Vellaisamya,*, Murugan Kuppusamyb, Venugopal Thangamuthuc and Sivakumar Aburpa Avanacharid

  • aDepartment of Mechanical Engineering, Shivani Engineering College, Trichy, Tamilnadu, India
    bDepartment of Mechanical Engineering, Mahendra Institute of Technology, Namakkal, Tamilnadu, India
    cDepartment of Mechanical Engineering, KGISL Institute of Technology, Coimbatore, Tamilnadu, India
    dDepartment of Mechanical Engineering, Varuvan Vadivelan Institute of Technology, Dharmapuri, Tamilnadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. A. Anu kuttan, R. Rajesh, and M. Dev Anand, J. Braz. Soc. Mech. Sci. & Eng. 43 (2021) 1-14.
  •  
  • 2. K. Radhakrishnan and R. Kesavalu, Matéria (Rio de Janeiro.), 30 (2024) e20240797
  •  
  • 3. M. Chithirai Pon Selvan, N. Mohana Sundara Raju, and H.K. Sachidananda, Front. Mech. Eng. 7 (2012) 439-444.
  •  
  • 4. M. Chithirai Pon Selvan, and N. Mohana Sundara Raju, Int. J. Sci. Environ. Tech. 1[3] (2012) 174-182.
  •  
  • 5. D. Deepak, D.V. Akash, and D. Anjaiah, Int. Journal of Research in Engineering and Technology 4[9] (2015) 344-347.
  •  
  • 6. V.K. Pal and S.K. Choudhury, Procedia Mater. Sci. 5 (20114) 1584-1592.
  •  
  • 7. M. Naresh Babu and N. Muthukrishnan, Mater. Manuf. Processes 29 (2014) 1422-1428.
  •  
  • 8. Ajay D Kumbhar and Manavendra Chatterjee, Int. J. Tech. Res. Eng. 4[9] (2017) 1548-1553.
  •  
  • 9. Naidu Naresh Kumar, G. Sharath Kumar, and M. Shiva Shankar Durga, Int. J. Modern St. Mech Eng. 5[1] (2019) 41-47.
  •  
  • 10. Miroslav Radovanovic, Procedia Manufacturing 47 (2020) 781-787.
  •  
  • 11. A. Dumbhare, P. Dubey, and S.V. Deshpande, J. Braz. Soc. Mech. Sci. Eng. 40[5] (2018) 259.
  •  
  • 12. Y.I. Mogul, I. Nasir, and P. Myler, Mater. Today Proc. 28 (2020) 604-610.
  •  
  • 13. M. Soori and B. Arezoo, Proc. Inst. Mech. Eng., Part E: J. Process Mech. Eng. 238[4] (2023) 1613-1625.
  •  
  • 14. A. Kumar, H. Singh, and V. Kumar, Mater. Manuf. Processes 33[13] (2018) 1483-1490.
  •  
  • 15. R. Thirumalai, J.S. Senthilkumaar, P. Selvarani, and S. Ramesh, Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci. 227[9] (2013) 1889-1897.
  •  
  • 16. R. Thirumalai, M. Seenivasan, and K. Pannerselvam, Mater. Today Proc. 45 (2021) 467-472.
  •  
  • 17. R. Thirumalai and J.S. Senthil Kumar, J. Mech. Sci. Tech. 27 (2013) 1109-1116.
  •  
  • 18. A. Srinivasan, R. Prabu, and S. Ramesh, J. Ceram Process Res. 23[6] (2022) 783-793.
  •  
  • 19. N. Ravikumar, R. Vijayan, and R. Viswanathan, J. Ceram Process Res. 24[1] (2023) 142-152.
  •  
  • 20. K.M. Senthilkumar N. Kathiravan, L. Girisha, and M. Sivaperumal, J. Ceram. Process. Res. 23[4] (2022) 541-545.
  •  
  • 21. N. Manoj Krishna, M. Selvaraj, Arul Kulandaivel, and S. Lakshmana Kumar, J. Ceram Process Res. 23[5] (2022) 656-665.
  •  

This Article

  • 2025; 26(5): 779-786

    Published on Oct 31, 2025

  • 10.36410/jcpr.2025.26.5.779
  • Received on Jul 24, 2025
  • Revised on Aug 9, 2025
  • Accepted on Sep 2, 2025

Correspondence to

  • Balasubramaniam Vellaisamy

  • Department of Mechanical Engineering, Shivani Engineering College, Trichy, Tamilnadu, India
    Tel : +919486646392

  • E-mail: vbalu9356@gmail.com