Articles
  • Experimental and mechanistic study on the lubrication of Si3N4 full-ceramic ball bearings by PTFE self-lubricating cage material under low-temperature conditions

  • Chao Weia,b, Songhua Lia,c, Yonghua Wanga,c,*, Kun Wanga,c, Jining Zhaoa,c and Shouqi Liua,c

  • aShenyang Jianzhu University, Key Laboratory of High-end Ceramic Bearing, Shenyang 110168, China
    bShenyang Jianzhu University, School of Engineering Training and Innovation, Shenyang 110168, China
    c Shenyang Jianzhu University, School of Mechanical Engineering, Shenyang 110168, China

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Y. Wu, R. Chen, D. Qian, and W. Wei, Mater. Prot. 53[6] (2020) 1-5+11.
  •  
  • 2. J. Xu, Q. Jia, F. Zhang, X. Yuan, and C. Zhang, Proc. Inst. Mech. Eng. Part J-J. Eng. Tribol. 232[5] (2018) 582-591.
  •  
  • 3. J. Sun, Z. Zhang, Z. Xia, X. Fang, R. Guan, G. Zhang, and J. Yao, J. Ceram. Process. Res. 24[3] (2023) 541-553.
  •  
  • 4. J. Sun, J. Huang, Z. Tian, Z. Xia, L. Wang, and Y. Zhang, J. Ceram. Process. Res. 25[6] (2024) 975-984.
  •  
  • 5. D. Lee, B. Jang, B. Kim, and K. Lee, J. Ceram. Process. Res. 20[5] (2019) 499-504.
  •  
  • 6. Y. Li, W. Li, Y. Zhu, G. He, S. Ma, and J. Hong, Lubricants 10[7] (2022) 149.
  •  
  • 7. A. Pramono, M. Nura, J. Soedarsono, and N. Indayaningsih, J. Ceram. Process. Res. 20[1] (2019) 1-7.
  •  
  • 8. G. Zhang and X. Yan, Ind. Lubr. Tribol. 66[1] (2014) 31-37.
  •  
  • 9. R. Surendrana and A. Kumaravelb, J. Ceram. Process. Res. 24[5] (2023) 899-906.
  •  
  • 10. Y. Wang, S. Li, C. Wei, Y. Zhang, G. Lin, D. An, and J. Zhao, J. Ceram. Process. Res. 25[4] (2024) 643-659.
  •  
  • 11. S. Wen, and P. Huang, in “Principles of Tribology (Second Edition)”(Beijing: Tsinghua University Press, 2002) p. 85.
  •  
  • 12. S. Li, J. Zhao, Y. Wang, G. Lin, C. Wei, Z. Xia, C. Jia, and T. Jing, J. Ceram. Process. Res. 26[3] (2025) 472-482.
  •  
  • 13. Q. Wang, S. Sun, S. Li, and Z. Guo, Ceram. Int. 44[18] (2018) 22680-22685.
  •  
  • 14. F. Ning, in (Beijing: Chemical Industry Press, 2021), pp. 37-50.
  •  
  • 15. J. Shi and L. Wang, J. Mech. Eng. 52[3] (2016) 86-92.
  •  
  • 16. S. Ahn and K. Nam, J. Ceram. Process. Res. 17[10] (2016) 1046-1051.
  •  
  • 17. H. Nam and K. Nam, J. Ceram. Process. Res. 22[1] (2021) 66-73.
  •  
  • 18. P. Wang, S. Li, Y. Wu, and J. Zhao, J. Ceram. Process. Res. 25[4] (2024) 694-703.
  •  
  • 19. B. Li and Z. Cao, Surf. Technol. 46[9] (2017) 32-38.
  •  
  • 20. E. Feyzullahoglu and Z. Saffak, Mater. Des. 29[1] (2008) 205-211.
  •  
  • 21. S. Feng, S. Kondo, T. Kaseyama, T. Nakazawa, T. Kikuchi, R. Selyanchyn, S. Fujikawa, L. Christiani, K. Sasaki, and M. Nishihara, J. Membr. Sci. 548 (2018) 223-231.
  •  
  • 22. M. Kyeong, J. Chae, S. Lee, T. Lim, M. Kim, S. Lee, K. Song, and H. Kim, J. Membr. Sci. 660 (2022) 120853.
  •  
  • 23. S. Bahadur, Wear 245[1-2] (2000) 92-99.
  •  
  • 24. S. Shi, J. Wu, and Y. Peng, Wear 408 (2018) 208-213.
  •  
  • 25. X. Yin, J. Tu, W. Qin, S. Han, and K. Gu, Mater. Prot. 51[10] (2018) 27-30+100.
  •  
  • 26. J. Wu, J. Zhu, L. Mu, Y. Shi, Y. Dong, X. Feng, and X. Lu, Tribol. Int. 94 (2016) 315-322.
  •  
  • 27. Z. Hu, M. Shao, J. Guo, S. Huang, and X. Xu, Opt. Precis. Eng. 25[5] (2017) 1250-1258.
  •  
  • 28. A. Kumar, S. Ghosh, and S. Aravindan, Ceram. Int. 45[14] (2019) 17447-17466.
  •  
  • 29. W. Feng, L. Yin, Y. Han, J. Wang, K. Xiao, and J. Li, Ind. Lubr. Tribol. 73[1] (2021) 82-87.
  •  
  • 30. E.N. Brown, P.J. Rae, and E.B. Orler, Polymer 47 (2006) 7506-7518.
  •  
  • 31. Y. Luo, B. Yang, and W. Tu, J. Aeronaut. Power 37[12] (2022) 2887-2895.
  •  
  • 32. Y. Wang, W. Wang, T. Qing, and S. Zhang, J. Mech. Eng. 54[9] (2018) 9-16.
  •  
  • 33. Z. Wang, S. Li, J. Sun, Y. Sui, C. Ma, and X. Zhang, Lubr. Sealing 47[9] (2022) 86-91.
  •  

This Article

  • 2025; 26(5): 754-766

    Published on Oct 31, 2025

  • 10.36410/jcpr.2025.26.5.754
  • Received on Jul 10, 2025
  • Revised on Aug 27, 2025
  • Accepted on Sep 8, 2025

Correspondence to

  • Yonghua Wang

  • aShenyang Jianzhu University, Key Laboratory of High-end Ceramic Bearing, Shenyang 110168, China
    c Shenyang Jianzhu University, School of Mechanical Engineering, Shenyang 110168, China
    Tel : 18624057650 Fax: 024-24692192

  • E-mail: yonghua0514@sjzu.edu.cn