Articles
  • Comparative analysis of four different fly ash sources as additives in porcelain ceramics: microstructural and mechanical characterization

  • I. Erdogana, H. Kursuna,*, U. Onenb, T. Boyraza and T. Kursunc

  • aDepartment of Metallurgical and Materials Engineering, Sivas Cumhuriyet University Sivas, Türkiye
    bDepartment of Metallurgical and Materials Engineering, Mersin University, Mersin, Türkiye
    cDepartment of Manufacturing Engineering Sivas Cumhuriyet University Sivas, Türkiye

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. W.M. Carty and U. Senapati, J. Am. Ceram. Soc. 81[1] (1998) 3-20.
  •  
  • 2. Y. Iqbal and W.E. Lee, J. Am. Ceram. Soc. 82[12] (1999) 3584-3590.
  •  
  • 3. F.H. Norton, “Fine Ceramics: Technology and Applications”, (2nd ed., Robert E. Krieger Publishing Company Inc., FL. 1978) p.507.
  •  
  • 4. W.D. Kingery, H.K. Bowen, and D.R. Ulhmann, “Introduction to Ceramics” (Wiley and Sons New York, 1976) p.177-216.
  •  
  • 5. T. Tarvornpanich, G.P. Souza, and W.E. Lee, J. Am. Ceram. Soc. 88[5] (2005) 1302-1308.
  •  
  • 6. J. Martín‐Márquez, A.G. De la Torre, M.A. Aranda, J.M. Rincón, and M. Romero, J. Am. Ceram. Soc. 92[1] (2009) 229-234.
  •  
  • 7. D.I. Seymour, M.S Thesis (New York State College of Ceramics at Alfred University Alfred NY 2000).
  •  
  • 8. W. Lerdprom, M.S Thesis (New York State College of Ceramics at Alfred University Alfred NY 2014).
  •  
  • 9. H. Lee and W.M. Carty, in Proceedings of the 106th Annual Meeting and Exposition of the Am. Cer. Soc. 2004 p.18.
  •  
  • 10. W.M. Carty, In Ceram. Eng. and Sci. Proceed., Columbus, Ohio, Am. Ceram. Soci. 23[2] (2002) 79-94.
  •  
  • 11. B. Pinto, W. Carty, and S. Misture, in Science of Whiteware, III, (Alfred University 2000).
  •  
  • 12. E. Rambaldi, W.M. Carty, A. Tucci, and L. Esposito, Ceram. Inter. 33[5] (2007) 727-733.
  •  
  • 13. A. Shah, M.S. Thesis (New York State College of Ceramics at Alfred University Alfred NY 2007).
  •  
  • 14. S.G.D. Iya, M.Z. Noh, S.N. Ab Razak, N. Sharip, and N.A.A. Kutty, Inter. J. Nanoelectronics Mater. 12[2] (2019).
  •  
  • 15. D. Gouvêa, T.T. Kaneko, H. Kahn, E. de Souza Conceição, and J.L. Antoniassi, Ceram. Inter. 41[1] (2015) 487-496.
  •  
  • 16. Z. Xian, L. Zeng, X. Cheng, and H. Wang, J. Therm. Analysis and Calorimetry 122[2] (2015) 997-1004.
  •  
  • 17. M. Tarhan, B. Tarhan, and T. Aydin, Ceram. Inter. 42[15] (2016) 17110-17115.
  •  
  • 18. A. Shui, X. Xi, Y. Wang, and X. Cheng, Ceram. Inter. 37[5] (2011) 1557-1562.
  •  
  • 19. J.C. Hower, C.L. Senior, E.M. Suuberg, R.H. Hurt, J.L. Wilcox, and E.S. Olson, Prog. Energy and Combust. Sci. 36[4] (2010) 510-529.
  •  
  • 20. S. Singh, L.C. Ram, R.E. Masto, and S.K. Verma, Int. J. Coal Geol. 87[2] (2011) 112-120.
  •  
  • 21. H.B. Vuthaluru and D. French, Fuel Process. Technol. 89[6] (2008) 595-607.
  •  
  • 22. Surabhi, Intern. J. Appl. Chem. 13[1] (2017) 29-52.
  •  
  • 23. Z. Çetinkaya, J. Faculty of Eng. and Arch. Gazi University 37[1] (2022) 137-144.
  •  
  • 24. N.S. Fishman, C.A. Rice, G.N. Breit, and R.D. Johnson, Fuel 78[2] (1999) 187-196.
  •  
  • 25. S. Adjei and S. Elkatatny, J. Petrol. Sci. Eng. 195 (2020) 107911.
  •  
  • 26. M. Mathapati, K. Amate, C. Durga Prasad, M.L. Jayavardhana, and T. Hemanth Raju, Materials Today: Proceed. 50 (2022) 1535-1540.
  •  
  • 27. G.G. Carette and V.M. Malhotra, in Energy, Mines and Resources Canada, Ottawa, on, canmet Report 86-6E. (1986).
  •  
  • 28. F.E. Huggins, Intern. J. Coal Geo. 50[1-4] (2002) 169-214.
  •  
  • 29. H.L. Jacobs and J. Bennett, Source: Sewage and Industrial Wastes 22[9] (1950) 1207-1213.
  •  
  • 30. W. Xiulan, H. Zhezhe, R. Qiang, L. Huanhuan, L. Fei, and W, Tengyue, J. Alloys and Compounds 702 (2017) 442-448.
  •  
  • 31. B. Manisha, P. Manish, P.B.S. Bhadoria, and S.C. Mahapatra, Progress in Natural Sci. 19 (2009) 1173-1186.
  •  
  • 32. T.K. Mukhopadhyay, S. Ghosh, J. Ghosh, S. Ghatak, and H.S. Maiti, Ceram. Intern. 36 (2010) 1055-1062.
  •  
  • 33. N. Bouzoubaa, M.H. Zhang, and V.M. Malhotra, Cem. Concr. Res. 30 (2000) 1037-1046.
  •  
  • 34. R.O. Lane and J.F. Best, Concrete Inter. 4[7] (1982) 81-92.
  •  
  • 35. H.Y. Aruntas, Department of Construction Education, Faculty of Technical Education, Gazi University, Technical Schools Ankara 21[1] (2006) 193-203.
  •  
  • 36. M. Erol, S. Küçükbayrak, and A.E. Meriçboyu, J. Hazardous Mater. 153[1-2] (2008) 418-425.
  •  
  • 37. A.Ç. Öztürk PhD Thesis (Mimar Sinan University, Institute of Science Edirne 2001) 107.
  •  
  • 38. A. Mir Akbar, “Industrial waste” (in: E. James, Alleman, T. Joseph, Kavanagh (Eds.) Proc. 14th Mid-Atlantic Conf, Am. Arbor Science Publishers Ann Arbor 1982) MI.
  •  
  • 39. N.U. Kockal, Ceram. Vidr. 51 (2012) 297-304.
  •  
  • 40. S.K. Das, S. Kumar, K.K. Singh, and P.R. Rao (in: Proceedings of the National Seminar on RVBIS, held in Ghatsila, India IIM 1996) p.7.
  •  
  • 41. S. Kumar, K.K. Singh, and P.R. Rao, J. Mater. Sci. 36 (2001) 5917-5922.
  •  
  • 42. W. He and X.D. Zhang (in: Proceedings of the 4th European Ceramic Society Conference Floor and wall tiles Riccione Spain October 1995) p.111.
  •  
  • 43. A. Manoshi, V. Rosouli, M. Mastali, and A. Kazami (in: Proceedings of the 4th European Ceramic Society Conference Floor and Wall Tiles Riccione, Spain 1995) p.85.
  •  
  • 44. J.H. Zhang, T.C. Lee, and W.S Lau, J Mater Process Technol, 63 (1997) 908-912.
  •  
  • 45. M.H. Chen, L. Gao, J.H. Zhou, and M. Wang, J. Mater. Process. Technol. 129 (2002) 408-411.
  •  
  • 46. O. Aguilar-García, S. Bribiesca-Vazquez, and J. Zárate-Medina, J. Ceram. Process. Res. 10[1] (2009) 37-42.
  •  
  • 47. Salem, S.H. Jazayeri, E. Rastelli, and G. Timellini, J. Ceram. Process. Res. 10[5] (2009) 621-627.
  •  
  • 48. N. Ediz and A. Yurdakul, J. Ceram. Process. Res. 10[4] (2009) 414-422.
  •  
  • 49. N. Ediz and A. Yurdakul, J. Ceram. Process. Res. 10[6] (2009) 758-769.
  •  
  • 50. F.A. Firat, J. Ceram. Process. Res. 13[6] (2012) 756-761.
  •  
  • 51. Z.B. Ozturk and N. Ay, J. Ceram. Process. Res. 13[5] (2012) 635-640.
  •  
  • 52. Z.B. Ozturk, J. Ceram. Process. Res. 17[6] (2016) 555-559.
  •  
  • 53. J. Song, X. Yang, P. Chen, H. Xu, D. Luo, R. Liu, and Z. Lai, J. Ceram. Process. Res. 23[4] (2022) 409-414.
  •  
  • 54. H. Yildizay, J. Ceram. Process. Res. 24[2] (2023) 237-241.
  •  
  • 55. T. Boyraz and A. Akkuş, J. Ceram. Process. Res. 22[2] (2021) 226-231.
  •  
  • 56. H. Wang, Z. Mengguang, S. Yongqi, J. Ru, L. Lili, and W. Xidong, Const. Build. Mater. 155 (2017) 930-938.
  •  
  • 57. L. Yang, Z. Shili, M. Shuhua, L. Chunli, and W. Xiaohui, Ceram. Intern. 43[15] (2017) 11953-11966.
  •  
  • 58. K. Dana, J. Dey, and S.K. Das, Ceram. Intern. 31 (2005) 141-152.
  •  
  • 59. S. Basin, S.S. Amritphale, and N. Chandra, Br. Ceram. Trans. 102[2] (2003) 83-86.
  •  
  • 60. S.K. Das, S. Kumar, K.K. Singh, and P.R. Rao (in: Proceedings of the National Seminar on RVBIS, held in Ghatsila India Published by IIM 1996) p.7-10.
  •  
  • 61. H.M. Shah and K.N. Maiti, Trans. Ind. Ceram. Soc. 60[3] (2001) 145-149.
  •  
  • 62. P. Türker, B. Erdoğan, F. Katnaş, and A. Yeğinobalı, TÇMB (2004) Ankara.
  •  

This Article

  • 2025; 26(5): 703-716

    Published on Oct 31, 2025

  • 10.36410/jcpr.2025.26.5.703
  • Received on May 7, 2025
  • Revised on Jul 26, 2025
  • Accepted on Aug 7, 2025

Correspondence to

  • H. Kursun

  • Department of Metallurgical and Materials Engineering, Sivas Cumhuriyet University Sivas, Türkiye
    Tel : +90 3464870000/1689 Fax: +903462191165

  • E-mail: hlykursun@gmail.com / hkursun@cumhuriyet.edu.tr