Articles
  • Multi response optimization of process parameters in turning of EN25 steel using topsis approach

  • R. Prakasha,*, R. Thirumalaib, K. Venkateshc and C. Natarajand

  • aAssistant Professor, Department of Mechanical Engineering, AVS College of Technology, Salem, India
    bProfessor, Department of Aeronautical Engineering, Hindusthan Institute of Technology, Coimbatore, India
    cAssistant Professor, Department of Mechanical Engineering, Mahendra Institute of Technology, Namakkal, India
    dProfessor, Department of Mechanical Engineering, Hindusthan Institute of Technology, Coimbatore, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. S. Balasubramaniyan and T. Selvaraj, J. Chin. Inst. Eng. 40[4] (2017) 267-274.
  •  
  • 2. B. Singarvel, T. Selvaraj, and R. Jeyapaul, Procedia Eng. 97 (2014) 158-165.
  •  
  • 3. T. Sampath Kumar, A. Vinoth Jebaraj, K. Sivakumar, and P. Mathivanan, Lect. Notes Mech. Eng. 2[1] (2019) 213-221.
  •  
  • 4. B. Singaravel and T. Selvaraj, J. Adv. Manuf. Syst. 15[1] (2016) 1-11.
  •  
  • 5. R. Viswanathan, S. Ramesh, S. Maniraj, and V. Subburam, Measurement. 159 (2020) 107800.
  •  
  • 6. M. Ficko, D. Begic-Hajdarevic, V. Hadžiabdić, and S. Klancnik, Int. J. Simul. Model. 19 (2020) 547-558.
  •  
  • 7. Y. Karpat and T. Özel, Int. J. Adv. Manuf. Technol. 35[3] (2007) 234-247.
  •  
  • 8. S. Rao Rama, S.A.K. Jeelani, and V. Swamulu, IOP Conf. Ser.: Mater. Sci. Eng. 1112[1] (2021) 012010.
  •  
  • 9. P. Umamaheswarrao, D.R. Raju, K.N.S. Suman, and B.R. Sankar, J. Mech. Energy Eng. 3[3] (2019) 227-232.
  •  
  • 10. J. Jayaraj, R. Sundaresan, and S. Chinnamuthu, Mechanics 25[1] (2019) 52-56.
  •  
  • 11. R. Thirumalai and J.S. Senthilkumar, J. Mech. Sci. Technol. 27 (2013) 1109-1116.
  •  
  • 12. R. Thirumalai, M. Seenivasan, and K. Pannerselvam, Mater. Today Proc. 45 (2021) 467-472.
  •  
  • 13. D.R. Jousha and A. Jegan, J. Ceram. Process. Res. 23[1] (2022) 69-78.
  •  
  • 14. M. Kumar, S.K. Tamang, D. Devi, M. Dabi, K.K. Prasad and R. Thirumalai, J. Ceram. Process. Res. 23[3] (2022) 373-382.
  •  
  • 15. M. Sivaperumal, R. Thirumalai, S. Kannan and K.S.S. Rao, J. Ceram. Process. Res. 23[3] (2022) 404-408.
  •  

This Article

  • 2025; 26(2): 280-285

    Published on Apr 30, 2025

  • 10.36410/jcpr.2025.26.2.280
  • Received on Feb 13, 2025
  • Revised on Mar 10, 2025
  • Accepted on Mar 20, 2025

Correspondence to

  • R. Prakash

  • Assistant Professor, Department of Mechanical Engineering, AVS College of Technology, Salem, India
    Tel : +91 8072897895

  • E-mail: drprakashavs@gmail.com