Articles
  • Layer by layer fabrication of zirconia by different UV light position approaching in digital light processing method

  • So-Young Koa, Kyoung-Jun Jangb and Sang-Jin Leea,c,*

  • aDepartment of Advanced Materials Science and Engineering, Mokpo National University, Muan 58554, Republic of Korea
    bResearch Institute, 3D Controls Co., Ltd, Busan 46721, Republic of Korea
    cResearch Institute of Ceramic Industry and Technology, Mokpo National University, Muan 58554, Republic of Korea

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. J.H. Choi, E.T. Kang, J.W. Lee, U.S. Kim, and W.S. Cho, J. Ceram. Process. Res. 19[1] (2018) 43-49.
  •  
  • 2. G. Moulika and P. Ponnusamy, J. Ceram. Process. Res. 23[3] (2022) 391-396.
  •  
  • 3. O. Santoliquido, P. Colombo, and A. Ortona, J. Eur. Ceram. Soc. 39[6] (2019) 2140-2148.
  •  
  • 4. K.M. Kim, H. Jeong, Y.S. Han, S.H. Baek, Y.D. Kim, and S.S. Ryu, J. Korean Powder Metall. Inst. 26[4] (2019) 327-333.
  •  
  • 5. Q. Lian, F. Yang, H. Xin, and D. Li, Ceram. Int. 43[17] (2017) 14956-14961.
  •  
  • 6. H. Zhang, Q.Q. Wang, H.X. Xiang, and X.L. Wang, Adv. Mater. Res. 299 (2011) 649-653.
  •  
  • 7. J.W. Bae, J.H. Jung, H.S. Wang, S.H. Kim, I.J. Kim, and K.G. Song, Polym. Korea 41[2] (2017) 361-366.
  •  
  • 8. H.S. Do, D.J. Kim, and H.J. Kim, J. Adhes. Interface 4[3] (2003) 41-51.
  •  
  • 9. C. Cha, Ceramist 23[1] (2020) 4-15.
  •  
  • 10. S.H. Kim, H.S. Chang, S.H. Park, and K. Song, Polym. Korea 34[5] (2010) 469-473.
  •  
  • 11. C.J. Bae, A. Ramachandran, K. Chung, and S. Park, J. Korean Ceram. Soc. 54[6] (2017) 470-477.
  •  
  • 12. H.S. Kim, D.H. Lee, and H.J. Kang, Polym. 41[6] (2017) 973-977.
  •  
  • 13. H. Wu, Y. Cheng, W. Liu, R. He, M. Zhou, S. Wu, X. Song, and Y. Chen, Ceram. Int. 42[15] (2016) 17290-17294.
  •  
  • 14. T.D. Ngo, A. Kashani, G. Imbalzano, K.T. Nguyen, and D. Hui, Compos. Part B: Eng. 143 (2018) 172-196.
  •  
  • 15. J.W. Halloran, Annu. Rev. Mater. Res. 46 (2016) 19-40.
  •  
  • 16. E. Zanchetta, M. Cattaldo, G. Franchin, M. Schwentenwein, J. Homa, G. Brusatin, and P. Colombo, Adv. Mater. 28 (2016) 370-376.
  •  
  • 17. J. Sun, J. Binner, and J. Bai, J. Eur. Ceram. Soc. 40[15] (2020) 5837-5844.
  •  
  • 18. B.J. Yun, Ceramist, 19[3] (2016) 78-88.
  •  
  • 19. F. Liravi, S. Das, and C. Zhou, Solid Freeform Fabrication Symposium. Univ. Tex. Austin, (2014) 1432-1451.
  •  
  • 20. M. Lee, H. Do, J. Park, J. Lee, M. Kim, S. Park, W. Kim, J. Whang, and H. Kim, J. Weld. Join. 39[1] (2021) 59-66.
  •  
  • 21. H.B. Lee, H.J. Lee, K.H. Kim, S.S. Ryu, and Y.S. Han, J. Korean Powder Metall. Inst. 27[6] (2020) 490-497.
  •  
  • 22. J.H. Choi, K.H. Hwang, U.S. Kim, J.H. Lee, K.B. Shim, S.M. Kang, and W.S. Cho, J. Ceram. Process. Res. 20[5] (2019) 547-555.
  •  
  • 23. S.Y. Ko, S.I. Go, K.J. Jang, and S.J. Lee, Korean J. Mater. Res. 34[10] (2024) 457-463.
  •  
  • 24. J.H. Back, Y.C. Yu, and W.J. Lee, Polym. Sci. Technol. 32[2] (2021) 147-151.
  •  
  • 25. W. Moon, E. Jiang, Y. Choi, B. S. Lim, and S. Chung, J. Korean Dent. Assoc. 61[7] (2023) 470-478.
  •  
  • 26. S.C. Ligon, B. Husár, H. Wutzel, R. Holman, and R. Liska, Chem. Rev. 114[1] (2014) 557-589.
  •  
  • 27. Y. Yagci, S. Jockusch, and N.J. Turro, Macromol. 43[15] (2010) 6245-6260.
  •  
  • 28. S.P. Gentry, J.W. Halloran, J. Eur. Ceram. Soc. 35[6] (2015) 1895-1904.
  •  
  • 29. G. Mitteramskogler, R. Gmeiner, R. Felzmann, S. Gruber, C. Hofstetter, J. Stampfl, J. Ebert, W. Wachter, and J. Laubersheimer, Addit. Manuf. 1 (2014) 110-118.
  •  
  • 30. E. Andrzejewska, Prog. Polym. Sci. 26[4] (2001) 605-665.
  •  
  • 31. J.W. Hwang, S.M. Noh, B. Kim, and H.W. Jung, J. Appl. Polym. Sci. 132[22] (2015) 41939.
  •  
  • 32. E.A. Clark, M.R. Alexander, D.J. Irvine, C.J. Roberts, M.J. Wallace, S. Sharpe, J. Yoo, R.J.M. Hague, C.J. Tuck, and R.D. Wildman, Int. J. Pharm. 529[1-2] (2017) 523-530.
  •  
  • 33. Y. Ko, J.W. Won, J.S. Hwang, and O.H. Kwon, Polym. Korea 47[3] (2023) 332-339.
  •  
  • 34. Y. Choe and B.K. Ryu, Polym. Korea 27[5] (2003) 421-428.
  •  
  • 35. H.J. Park, C.D. Han, and S.T. Oh, J. Adhes. Interface 14[4] (2013) 167-174.
  •  

This Article

  • 2025; 26(1): 91-101

    Published on Feb 28, 2025

  • 10.36410/jcpr.2025.26.1.91
  • Received on Oct 7, 2024
  • Revised on Jan 20, 2025
  • Accepted on Feb 5, 2025

Correspondence to

  • Sang-Jin Lee

  • aDepartment of Advanced Materials Science and Engineering, Mokpo National University, Muan 58554, Republic of Korea
    cResearch Institute of Ceramic Industry and Technology, Mokpo National University, Muan 58554, Republic of Korea
    Tel : +82-10-5587-6919 Fax: +82-61-450-2498

  • E-mail: lee@mokpo.ac.kr