Articles
  • Granulation behavior of CFBC ash for various states using a high intensive mixer

  • Jiwon Choi, Youna Lim and Kangduk Kim*

  • Department of Advanced Material Engineering, Kyonggi University, Suwon 16227, Korea

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. M.M. Aba, I.L. Sauer, and N.B. Amado, Int. J. Hydrogen Energy. 57 (2024) 660-678.
  •  
  • 2. H.P. Kuo, H.Y. Tseng, A.N. Huang, and R.C. Hsu, Adv. Powder Technol. 25 (2014) 472-475.
  •  
  • 3. H.Bilirgen, Fuel. 115 (2014) 618-624.
  •  
  • 4. J. Wang, .K. Xu, Z. Li, Y. Yang, Q. Li, Y. Bao, H. Yang, L. ding, R. Zhang, Y. Wang, and L. Yao, J. Ceram. Process. Res. 23[1] (2022) 79-85.
  •  
  • 5. E. Jeong, S. Jung, and H.S. Shin, Sci. Total Environ. 945 (2024) 174104.
  •  
  • 6. J. Park and Y.T. Kim, J. Ceram. Process. Res. 15[4] (2014) 212-215.
  •  
  • 7. Y. Kim, Y. Ryu, H. Jeon, G.K. Lee, S. Kang, J. Kim, C.S. Jang, and S.G. Lee, J. Ceram. Process. Res. 11[2] (2010) 225-232.
  •  
  • 8. G. Sheng, J. Zhai, Q. Li, and F. Li, Fuel. 86 (2007) 2625-2631.
  •  
  • 9. C. Chinnaraj, K. Subramanian, and P. Muthupriya, J. Ceram. Process. Res. 25[3] (2024) 345-354.
  •  
  • 10. C. Baek, J. Seo, M. Choi, J. Cho, J. Ahn, and K. Cho, Sustainability. 10 (2018) 4854.
  •  
  • 11. S.E. Lee and Y.C. Choi, Const. Build. Mater. 439 (2024) 137273.
  •  
  • 12. X.Y. Wang, J. Ceram. Process. Res. 21[6] (2020) 622-631.
  •  
  • 13. S.K. Seo, J. Ceram. Process. Res. 18[3] (2017) 177-182.
  •  
  • 14. J.S. Sim, K.G. Lee, Y.T. Kim, and S.K. Kang, J. Korean Ceram. Soc. 49 (2012) 185-190.
  •  
  • 15. J.S. Sim, K.G. Lee, Y.T. Kim, and S.K. Kang, J. Korean Ceram. Soc. 50 (2013) 18-24.
  •  
  • 16. P.B. Pathare, N. Bas, J.J. Fitzpatrick, K. Cronin, and E.P. Byme, Biosyst. Eng. 110 (2011) 473-481.
  •  
  • 17. P. Pandey, J. Tao, R. Chaudhury, J.Z. Gao, and D.S. Bindra, Pharm. Dev. Technol. 18 (2013) 210-224.
  •  
  • 18. S.M. Iveson, J.D. Litster, K. Hapgood, and B.J. Ennis, Powder Technol. 117 (2001) 3-39.
  •  
  • 19. P.K. Le, P. Avontuur, M.J. Hounslow, and A.D.Salman, Powder Technol. 189 (2009) 149-157.
  •  
  • 20. Y. Liu, D. Scharf, T. Graule, and F.J. Clemens, Powder Technol. 263 (2014) 159-167.
  •  
  • 21. T.M. Chitu, D. Oulahna, and M. Hemati, Powder Technol. 206 (2011) 34-43.
  •  
  • 22. W.D. Tu, A. Ingram, J. Seville, and S.S.Hsiau, Chem. Eng. J. 145 (2009) 505-513.
  •  
  • 23. H.J. Cheng, S.S. Hsiau, and C.C. Liao, Powder Technol. 211 (2011) 165-175.
  •  
  • 24. P.C. Knight, A. Johansen, H.G. Kristensen, T. Schæfer, and J.P.K. Seville, Powder Technol. 110 (2000) 204-209.
  •  
  • 25. S.H. Cho, S.M. Joo, J.S. Cho, J.K. Lee, and H. Kim, J. Ceram. Process. Res. 6[1] (2005) 57-62.
  •  
  • 26. B.J. Ennis and J.D. Litster, in “Particle size enlargement” (Perry’s Chemical Engineers’ Handbook, 7th end., 1997), pp. 20-56-20-89.
  •  
  • 27. P. Mort and G. Tardos, Kona. 17 (1999) 64-75.
  •  
  • 28. M. Butensky and D. Hyman, Ind. Eng. Chem. Fundam. 10 (1971) 212-219.
  •  
  • 29. G.I. Tardos, K.P. Hapgood, O.O. Ipadeola, and J.N. Michaels, Powder Technol. 140[3] (2004) 217-227.
  •  
  • 30. A. Szulc, E. Skotnicka, M.K. Gupta, and J.B. Królczyk, Powder Technol. 431 (2024) 119092.
  •  
  • 31. L. Kotamarthy, A. Dan, S. Karkala, S. Parvani, A.D. Román-Ospino, and R. Ramachandran, Adv. Powder Technol. 34 (2023) 104137.
  •  
  • 32. I. Muthancheri, A. Chaturbedi, A. Bétard, and R. Ramachandran, Adv. Powder Technol. 32 (2021) 2085-2096.
  •  
  • 33. V. Boonkanokwong, R.P. Frank, P. Valliappan, B. Remy, J.G. Khinast, and B.J. Glasser, Adv. Powder Technol. 29 (2018) 2733-2752.
  •  
  • 34. B. Liu, J. Wang, Q. Zhou, L. Zhao, Y. Wang, L. Shen, and R. Du, Adv. Powder Technol. 33 (2022) 103369.
  •  
  • 35. H.J. Cheng and S.S. Hsiau, Powder Technol. 199 (2010) 272-283.
  •  
  • 36. M. Bardin, P.C. Knight, and J.P.K. Seville, Powder Technol. 140[3] (2004) 169-175.
  •  
  • 37. T. Kusano, M. Yokota, A. Yonaga, Y. Akimoto, M. Tani, H. Nakamura, and T. Matsunaga, Adv. Powder Technol. 33 (2022) 103585.
  •  
  • 38. S. Pohl and P. Kleinebudde, Int. J. Pharm. 587 (2020) 119660.
  •  
  • 39. K.V. Probst and K.E. Ileleji, Adv. Powder Technol. 27 (2016) 1347-1359.
  •  
  • 40. J.B. Wade, G.P. Martin, and D.F. Long, Int. J. Pharm. 478[2] (2015) 439-446.
  •  

This Article

  • 2025; 26(1): 58-65

    Published on Feb 28, 2025

  • 10.36410/jcpr.2025.26.1.58
  • Received on Sep 20, 2024
  • Revised on Oct 30, 2024
  • Accepted on Jan 10, 2025

Correspondence to

  • Kangduk Kim

  • Department of Advanced Material Engineering, Kyonggi University, Suwon 16227, Korea
    Tel : +82-10-6206-6290

  • E-mail: solidwaste@kyonggi.ac.kr