Articles
  • Initiation of secondary surface crack in the ring raceway of silicon nitride full ceramic bearing

  • Pengfei Wanga,b, Songhua Lia,c,*, Yuhou Wua,c and Jining Zhaoa

  • aSchool of Mechanical Engineering, Shenyang Jianzhu University, Shenyang 110168, China
    bSchool of Intelligent Manufacturing, Panzhihua University, Panzhihua 617000, China
    cNational-Local Joint Engineering Laboratory of NC Machining Equipment and Technology of High-Grade Stone, Shenyang Jianzhu University, Shenyang 110168, Liaoning, China

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. J. Sun, Z. Zhang, Z. Xia, X. Fang, R. Guan, G. Zhang, and J. Yao, J. Ceram. Process. Res. 24 (2023) 541-553.
  •  
  • 2. L.M. Keer, and M.D. Bryant, Asme J. Lubr. Tech 105 (1983) 198-205.
  •  
  • 3. R.S. Zhou, H.S. Cheng, and T. Mura, Journal of Tribology 111 (1989) 605-613.
  •  
  • 4. Z.J. Liu, and L. He SQ, in (Beijing: China Machine Press, 2006)
  •  
  • 5. Peter, Gloeckner, Matthias, Martin, Michael, and Flouros, Tribol T 60[6] (2016) 1148-1158.
  •  
  • 6. J. Belinha, J.M.C. Azevedo, L.M.J.S. Dinis, and R.M.N. Jorge, Eng. Comput. 14 (2017).
  •  
  • 7. L. Cui, X. Wang, H. Wang, and J. Ma, IEEE Trans. Instrum. Meas. PP (2019) 1.
  •  
  • 8. L. Cui, X. Wang, H. Wang, and N. Wu, IEEE Access (2019) 1.
  •  
  • 9. D. Wu, H. Wang, H. Liu, T. He, and T. Xi, Applied Sciences 9 (2019) 3246.
  •  
  • 10. H. Guo, D.H. Yoon, and D.W. Shin, J. Ceram. Process. Res. 6 (2005) 321-325.
  •  
  • 11. H. Kawaoka, T. Kusunose, Y.H. Choa, T. Sekino, and K. Niihara, J. Ceram. Process. Res. 2 (2001) 51-53.
  •  
  • 12. B. Li, H. Ma, X. Yu, T. Zeng, X. Guo, and B. Wen, Arch. Appl. Mech. 89 (2019) 1-28.
  •  
  • 13. C. Vieillard, Int. J. Fatigue 96 (2016) 283-292.
  •  
  • 14. D. Ma, J. Wang, and L. Sun, J. Am. Ceram. Soc. 100 (2017) 2296-2308.
  •  
  • 15. L. Cui, Z. Jin, J. Huang, and H. Wang, IEEE Access 7 (2019).
  •  
  • 16. L. Sun, D. Ma, L. Wang, X. Shi, J. Wang, and W. Chen, Eng. Fract. Mech. 197 (2018) 151-159.
  •  
  • 17. P. Zhao, M. Hadfield, Y. Wang, and C. Vieillard, Wear 257 (2004) 1047-1057.
  •  
  • 18. W. Karaszewski, Tribol. Int. 41 (2008) 889-895.
  •  
  • 19. M.J. Komanduri, Wear (1998).
  •  
  • 20. R.N. Katz and J.G. Hannoosh, Mater. Des. 8 (1987) 108-112.
  •  
  • 21. E.V. Zaretsky, Y.P. Chiu, and T.E. Tallian, Journal of Materials Engineering 11 (1989) 237-253.
  •  
  • 22. Y. Wang, and M. Hadfield, 1999, pp. 1284-1292.
  •  
  • 23. Y. Wang and M. Hadfield, WEAR 243[1-2] (2000) 167-174.
  •  
  • 24. Y. Wang and M. Hadfield, WEAR 243[1] (2000) 157-166.
  •  
  • 25. Y. Wang and M. Hadfield, WEAR 250 (2001) 282-292.
  •  
  • 26. Y. Wang and M. Hadfield, WEAR 253[9-10] (2002) 975-985.
  •  
  • 27. Y. Wang and M. Hadfield, Tribology Series 41[03] (2003) 349-358.
  •  
  • 28. Y. Wang and M. Hadfield, WEAR 254[7-8] (2003) 597-605.
  •  
  • 29. Y. Wang and M. Hadfield, WEAR 256[1-2] (2004) 208-219.
  •  
  • 30. P. Zhao, M. Hadfield, Y. Wang, and C. Vieillard, Wear 261 (2006) 390-397.
  •  
  • 31. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall, J. Am. Ceram. Soc. 64 (1981) 533-538.
  •  
  • 32. B.R. Lawn, A.G. Evans, and D.B. Marshall, J. Am. Ceram. Soc. (1980).
  •  
  • 33. K. Niihara, R. Morena, and D.P.H. Hasselman, Journal of Materials Science Letters 1 (1982) 13-16.
  •  
  • 34. A.G. Evans and E.A. Charles, J. Am. Ceram. Soc. (1976).
  •  
  • 35. J.E. Blendell, Massachusetts Institute of Technology 123 (1979) 617-626.
  •  
  • 36. Z. Ren, B. Li, and Q. Zhou, Wear 506 (2022) 204459.
  •  
  • 37. P. Zhao, M. Hadfield, Y. Wang, and C. Vieillard, Wear 257 (2004) 1047-1057.
  •  
  • 38. M. Janssen, J. Zuidema, and R. Wanhill, CRC Press, (2004).
  •  
  • 39. A.E. Piotrowski and M.J. O'Brien, Fatigue Fract. Eng. Mater. Struct. 29 (2006) 558-572.
  •  

This Article

  • 2024; 25(4): 694-703

    Published on Aug 31, 2024

  • 10.36410/jcpr.2024.25.4.694
  • Received on Jun 14, 2024
  • Revised on Jul 21, 2024
  • Accepted on Jul 31, 2024

Correspondence to

  • Songhua Li

  • aSchool of Mechanical Engineering, Shenyang Jianzhu University, Shenyang 110168, China
    cNational-Local Joint Engineering Laboratory of NC Machining Equipment and Technology of High-Grade Stone, Shenyang Jianzhu University, Shenyang 110168, Liaoning, China

  • E-mail: lisonghua@sjzu.edu.cn