Articles
  • Comparison of mechanical behavior after thermal shock according to different substrate and coating methods in the SiC coated C/C fiber reinforced composites

  • Dong Heon Leea,*, Seong Joon Kohb, Soo Bin Baec, Man Young Leec and Kee Sung Leeb,*

  • aDepartment of Automotive Engineering, Kookmin University, Seoul 02707, Korea
    bSchool of Mechanical Engineering, Kookmin University, Seoul 02707, Korea
    cAgency for defense development, Daejeon 341876, Korea

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. P. Chowdhury, H. Sehitoglu, and R. Rateick, Carbon 126 (2018) 382-393.
  •  
  • 2. J. Zhang, G Lin, U Vaidya, and H Wang, Compos. Part B: Engineering 250 (2023) 110463.
  •  
  • 3. Y. Chen, Y. Zhao, D. Liu, R. Tao, S. Ai, B. Xu, Y. Yang, and D. Fang, Ceram, Int. 45[17] (2019) 22249-22252.
  •  
  • 4. W. Krenkel, in “Ceramic Matrix Composites” (WILEY-VCH, 2008)
  •  
  • 5. G. Savage, in “Carbon-Carbon Composites” (Springer Science & Business Media, 2012)
  •  
  • 6. M. Albano, R.B. Morles, F. Cioeta, and M. Marchetti, Acta Astronaut. 99 (2014) 276-282.
  •  
  • 7. F.J. Buchanan and J. A. Little, Surf. Coat. Technol. 46 (1991) 217-226.
  •  
  • 8. K.S. Lee, Z. Meng, I.-C. Shin, K. Choi, J.E. Lee, S.B. Bae, and H.-I. Lee, Ceram. Inter. 46 (2020) 21233-21242.
  •  
  • 9. C. Wang, K. Li, Q. He, D. He, C. Huo, Y. Su, X. Shi, and H. Li, Corrosion Sci. 151 (2019) 57-68.
  •  
  • 10. K.S. Lee, S.K. Lee, and B.R. Lawn, J. Am. Ceram. Soc. 81[9] (1998) 2394-2404.
  •  
  • 11. B.R. Lawn, J. Am. Ceram. Soc. 81[8] (1998) 1977-1994.
  •  
  • 12. K.N. Fatema, H.M. Lim, J.S. Hong, K.S. Lee, and I.J. Kim, J. Ceram. Process. Res. 24[1] (2023) 197-204.
  •  
  • 13. M. Han, C. Zhou, and H. Zhang, Compos. Sci. Technol. 168 (2018) 371-380.
  •  
  • 14. X.M. Chen, L. Chen, C.Y. Zhang, L.L. Song, and D.T. Zhang, Compos. Part A 85 (2016) 12-30.
  •  
  • 15. J.E. Lee, S.B. Bae, N.C. Cho, H.I. Lee, Z. Meng, and K.S. Lee, Arch. Metall. Mater. 66[3] (2021) 777-782.
  •  
  • 16. S. Wuttiphan, A. Pajares, B.R. Lawn, and C.C. Berndt, Thin Solid Films 293 (1997) 251-260.
  •  
  • 17. P. Galizia, A. Vinci, L. Zoli, F. Monteverde, J. Binner, V. Venkatachalam, M.A. Lagos, T. Reimer, N. Jain, and D. Sciti, Compos. Part A 149 (2021) 106523.
  •  
  • 18. D. Sciti, P. Galizia, T. Reimer, A. Schoberth, C.F. Gutierrez-Gonzales, L. Vinci, and L. Zoli, Compos. Part B: Engineering 216 (2021) 108839.
  •  
  • 19. S. Mungiguerra, L. Silvestroni, R. Savino, L. Zoli, B. Esser, M. Lagos, and D. Sciti, Corros. Sci. 195 (2022) 10995.
  •  

This Article

  • 2024; 25(4): 683-689

    Published on Aug 31, 2024

  • 10.36410/jcpr.2024.25.4.683
  • Received on May 22, 2024
  • Revised on Jul 30, 2024
  • Accepted on Jul 31, 2024

Correspondence to

  • Dong Heon Lee a, Kee Sung Lee b

  • aDepartment of Automotive Engineering, Kookmin University, Seoul 02707, Korea
    bSchool of Mechanical Engineering, Kookmin University, Seoul 02707, Korea
    Tel : +82-2-910-4711 Fax: +82-2-910-4718

  • E-mail: dongheon@kookmin.ac.kr(Dong Heon Lee), keeslee@koo