Articles
  • The influence of process parameters on the optical properties of seashell-added ceramic glazes, evaluated using a factorial design

  • Ceren Peksen*

  • Department of Ceramic and Glass, Ondokuz Mayıs University, Samsun 55100, Turkey

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. R. Casasola, J. Ma Rincón, and M. Romero, J. Mater Sci. 47 (2012) 553-582.
  •  
  • 2. M. Burleson, in “The Ceramic Glaze Handbook: Materials, Techniques, Formulas” (Lark Books, 2003).
  •  
  • 3. J. Eom, S. Kang, K. Kim, and J. Kim, J. Ceram. Process. Res. 22[5] (2021) 568-575.
  •  
  • 4. H. Lu, M. He, Y. Liu, J. Guo, L. Zhang, D. Chen, H. Wang, H. Xu, and R. Zhang, J. Ceram. Process. Res. 12[5] (2011) 588-591.
  •  
  • 5. J.R. Taylor and A.C. Bull, in “Ceramics Glaze Technology” (Pergamon Press, 1986).
  •  
  • 6. T. Pradell and J. Molera, Archaeol. Anthropol. Sci. 12 [189] (2020) 1-28.
  •  
  • 7. Z. Sang, F. Wang, X. Yuan, S. Shen, J. Wang, and X. Wei, J. Ceram. Process. Res. 23[6] (2022) 758-765.
  •  
  • 8. M. Ravi, B. Murugesan, A. Jeyakumar, and K. Raparthi, Adv. Mater. Sci. 21[3] (2021) 43-62.
  •  
  • 9. U.G. Eziefula, J.C. Ezeh, and B.I. Eziefula, Constr. Build. Mater. 192 (2018) 287-300.
  •  
  • 10. B. Safi, M. Saidi, A. Daoui, A. Bellal, A. Mechekak, and K. Toumi, Constr. Build. Mater. 78 (2015) 430-438.
  •  
  • 11. M. Olivia, A. A. Mifshella, and L. Darmayanti, Procedia Eng. 125 (2015) 760-764.
  •  
  • 12. C. Peksen, L. Koroglu, and H. Kartal, Int. J. Appl. Ceram. Technol. 17[4] (2020) 1940-1947.
  •  
  • 13. S.P. Malu and B. Ajibade, Glob. J. Pure Appl. 13[3] (2007) 379-382.
  •  
  • 14. I.A. Rauf, J. Phys. Chem. Biophys. 5[5] (2015) 1-2.
  •  
  • 15. R. Mead, in “The Design of Experiments: Statistical Principles for Practical Applications” (Cambridge University Press, 1994).
  •  
  • 16. D.W. Richerson, in “The Magic of Ceramics”, (John Wiley and Sons Inc., 2000).
  •  
  • 17. Z. B. Ozturk and N. Ay, J. Ceram. Process. Res. 13[5] (2012) 635-640.
  •  
  • 18. L.N. Frigon and D. Mathews, in “Practical Guide to Experimental Design” (John Wiley&Sons Inc., 1997).
  •  
  • 19. M.I. Rodrigues and F.A. Iemma, in “Experimental Design and Process Optimization” (CRC Press, 2015).
  •  
  • 20. F. Geyikci, Prog. Org. Coat. 98 (2016) 28-34.
  •  
  • 21. A.L.B. Dotta, C. A. Costa, and M.C.M. Farias, Tribol. Int. 114 (2017) 208-220.
  •  
  • 22. B. Somasundaram, K.T. Anand, D. Kirubakaran, P. Ganeshan, S. Kannan, A.H. Seikh, and A. Ghosh, J. Ceram. Process. Res. 24[4] (2023) 626-633.
  •  
  • 23. J. Antony, Int. J. Oper. Prod. Manag. 21[5/6] (2001) 812-822.
  •  
  • 24. L. Koroglu, C. Peksen, M. Ince, and E. Ayas, J. Aust. Ceram. Soc. 59 (2023) 1263-1269.
  •  
  • 25. R.A. Platova and Y.T. Platov, Glass Ceram. 74 (2017) 91-94.
  •  
  • 26. A. Tunali, J. Ceram. Process. Res. 15[4] (2014) 225-230.
  •  
  • 27. R.A. Eppler and D.R. Eppler, in “Glazes and Glass Coatings” (The American Ceramic Society, 2000)
  •  
  • 28. M.J. Ribeiro and D. Tulyaganov, in “Traditional Ceramics Manufacturing. In: F. Baino, M. Tomalino and D. Tulyaganov (eds) Ceramics, Glass and Glass-Ceramics” (Springer, 2021).
  •  
  • 29. F. Hamer and J. Hamer, in “The Potter’s Dictionary of Materials and Techniques” (University of Pennsylvania Press, 2004).
  •  
  • 30. J. Lee, H. Choi, and S. Lee, J. Ceram. Process. Res. 13[5] (2012) 646-650.
  •  
  • 31. R. Casasola, J.M. Rincon, and M. Romero, J. Mater. Sci. 47 (2012) 553-582.
  •  
  • 32. A.R. Jamaludin, S.R. Kasim, and Z.A. Ahmad, Sci. of Sinter. 42[3] (2010) 345-355.
  •  
  • 33. A. Escardino, J. Garcia-Ten, and C. Feliu, J. Eur. Ceram. Soc. 28[16] (2008) 3011-3020.
  •  
  • 34. L. Duan, W. Zhou, H. Li, X. Chen, and C. Zhao, Korean J. Chem. Eng. 28[9] (2011) 1952-1955.
  •  
  • 35. M. Jiang, H. Liu, X. Fan, and Z. Wang, Pol. J. Environ. Stud. 28[3] (2019) 1719-1725.
  •  
  • 36. Y.F. Gomes, P.N. Medeiros, M.R.D. Bornio, I.M.G. Santos, C.A. Paskocimas, R.M. Nascimento, and F.V. Motta, Ceram. Int. 41 (2015) 699-706.
  •  
  • 37. S. Vinothkumar and P. Senthilkumar, J. Ceram. Process. Res. 23[4] (2022) 546-552.
  •  
  • 38. M.A. Baih, N. Saffaj, A. Bakka, R. Mamouni, N. El Baraka, H. Zidouh, and N. El Qacimi, AMST 25[3] (2021) 1-15.
  •  
  • 39. S.L. Correia, D. Hotza, and A.M. Segadaes, Ceram. Int. 30[6] (2004) 917-922.
  •  
  • 40. S. Kumar, M. Bablu, S. Janghela, M.K. Mısra, R. Mıshra, A. Ranjan, and N.E. Prasad, Bull. Mater. Sci. 4[17] (2018) 1-13.
  •  
  • 41. P.T. Teo, S.K. Zakaria, N.M. Sharif, A.A. Seman, M.A.A. Taib, J.J. Mohamed, M. Yusoff, A.H. Yusoff, M. Mohamad, A. Ali, and M.N. Masri, Crystals 11[4] (2021) 1-26.
  •  

This Article

  • 2023; 24(6): 968-976

    Published on Dec 31, 2023

  • 10.36410/jcpr.2023.24.6.968
  • Received on Aug 16, 2023
  • Revised on Oct 10, 2023
  • Accepted on Oct 28, 2023

Correspondence to

  • Ceren Peksen

  • Department of Ceramic and Glass, Ondokuz Mayıs University, Samsun 55100, Turkey
    Tel : +90 362 312 1919 Fax: +90 362 445 2770

  • E-mail: cpeksen@omu.edu.tr