Articles
  • Effect of sintering temperature on properties of lightweight porous ceramics prepared by foam impregnation method

  • Zhili Cuia, Shiming Xiaob, Xianli Luob, Yunxuan Liub, Ming Liub, Yuyun Zengb, Xiaoli Zhongb, Hong Zhengb, and Haifeng Guob,*

  • aSchool of Mechanics and photoelectric Physics, Anhui University of Science& Technology,, Huainan 232001, PR China
    bEngineering & Technology Research Center for Environmental Protection Materials and Equipment of Jiangxi Province, College of Materials and Chemical Engineering, Pingxiang University, Pingxiang 337055, PR China

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. X.X. Li, L.W. Yan, A. Guo, H.Y. Du, F. Hou, and J.C. Liu, Ceram. Inter. 49 (2023) 6479-6486.
  •  
  • 2. J.M. Jiang, S. Wang, W. Li, and Z.H. Chen, J. Alloy. Compd. 695 (2017) 2295-2300.
  •  
  • 3. T. Ohji, and M. Fukushima, Int. Mater. Rev. 57 (2012) 115-131.
  •  
  • 4. T. Zhang, S.F. Zhu, G.S. Fei, and Y.H. Ma. J. Ceram. Process. Res. 23[6] (2022) 845-852.
  •  
  • 5. X. Pu, L. Jia, D. Zhang, C. Su, and X. Liu, J. Am. Ceram. Soc. 90 (2007) 2998-3000.
  •  
  • 6. A. Kocakusakoglu, M. Daglar, M. Konyar, H.C. Yatmaz, and K. Ozturk, J. Eur. Ceram. Soc. 35 (2015) 2845-2853.
  •  
  • 7. J. Biggemann, M. Stumpf, and T. Fey, Materials 14[12] (2021) 3294.
  •  
  • 8. L. Yuan, E. Jin, C. Li, Z. Liu, C. Tian, B. Ma, and J. Yu, Ceram. Int. 47 (2021) 9017-9023.
  •  
  • 9. M. Sun, S. Yang, X. Gao, P. Man, J. Qu, W. Zhang, S. Yin, and L. Cheng, Ceram. Int. 47 (2021) 8169-8174.
  •  
  • 10. X. Sun, T. Zeng, Y. Zhou, K. Zhang, G. Xu, X. Wang, and S. Cheng, Ceram. Int. 46 (2020) 22797-22804.
  •  
  • 11. W.Y. Jang, B. Basnet, J.G. Park, H.M. Lim, T.Y. Lim, and I.J. Kim, J. Ceram. Process. Res.19[4] (2018) 296-301.
  •  
  • 12. X.Y. Luo, Q. Zhang, F. Ye and, L.F. Cheng, J. Mater. Res. Technol. 23 (2023)1332-1346.
  •  
  • 13. I. Sopyan, and J. Kaur, Ceram. Inter. 35 (2009) 3161-3168.
  •  
  • 14. C.L. Wang, H.J. Chen, X.D. Zhu, Z.W. Xiao, K. Zhang, and X.D. Zhang, Mater. Sci. Eng. C 70 (2017) 1192-1199.
  •  
  • 15. J.T. Tian, and J.M. Tian, J. Mater. Sci. 36 (2001) 3061-3066.
  •  
  • 16. K.N. Fatema, H.M. Lim, J.S. Hong, K.S. Lee, and I.J. Kim, J. Ceram. Process. Res. 24[1] (2023) 197-204.
  •  
  • 17. C.H. Li, W. Zhao, J.L. Zhang, W. Lu, P. Li, B.J. Yan, and H.W. Guo, J. Ceram. Process. Res. 22[4] (2021) 409-420.
  •  
  • 18. E. Srinivasa Rao, and P. Manohar, J. Ceram. Process. Res. 17[5] (2016) 448-453.
  •  
  • 19. E. Srinivasa Rao, and P. Manohar, J. Ceram. Process. Res. 17[11] (2016) 1164-1170.
  •  
  • 20. N.T.T. Thao, and B.H. Bac, J. Ceram. Process. Res. 24[3] (2023) 471-477.
  •  
  • 21. W. Yan, N. Li, Y. Li, J. Tong, and H. Luo, J. Ceram. Process. Res. 14[1] (2013) 109-113.
  •  
  • 22. J. Eom, S. Kang, K. Kim, and J.H. Kim, J. Ceram. Process. Res. 22[5] (2021) 568-575.
  •  
  • 23. Y. Rho, K. Kim, and J. Kim, J. Ceram. Process. Res. 21[S1] (2020) 9-15.
  •  
  • 24. Y.N. Lee, S.H. Ahn, H. Nam, and K.W. Nam, J. Ceram. Process. Res. 19[6] (2018) 467-471.
  •  
  • 25. J.G. Song, X.Q. Yang, P. Chen, H. Xu, D.P. Luo, R.J. Liu, and Z.J. Lai, J. Ceram. Process. Res. 23[4] (2022) 409-414.
  •  

This Article

  • 2023; 24(5): 835-840

    Published on Oct 31, 2023

  • 10.36410/jcpr.2023.24.5.835
  • Received on Jul 17, 2023
  • Revised on Aug 17, 2023
  • Accepted on Sep 17, 2023

Correspondence to

  • Haifeng Guo

  • Engineering & Technology Research Center for Environmental Protection Materials and Equipment of Jiangxi Province, College of Materials and Chemical Engineering, Pingxiang University, Pingxiang 337055, PR China
    Tel : +86 799 6682008 Fax: +86 799 6682008

  • E-mail: guohaifeng720@163.com