Articles
  • Analyze the various effects of cutting tools in the machining of titanium alloy

  • D. Ananda Kumara,*, A. Murugarajanb and E. Mohanc

  • aDepartment of Mechanical Engineering, JCT College of Engineering and Technology, Pichanur, Coimbatore, Tamilnadu, 641105, India
    bDepartment of Robotics and Automation, Sri Ramakrishna Engineering College, Vattamalaipalayam, Coimbatore, Tamilnadu, 641022, India
    cDepartment of Mechanical Engineering, Shanmuganathan Engineering College, Arasampatti, Pudukkottai, Tamilnadu, 622507, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Z.A.M. Tagiuri, T.M. Dao, A.M. Samuel, and V. Songmene, Mater. 15[9] (2022) 3369-3376.
  •  
  • 2. A.B. PoP, A.V. SAndu, A. SAchel Arie, and A.M. ȚîȚu, Arch. Metall. Mater. 67[2] (2022) 120-126.
  •  
  • 3. A.B. Pop and A.M. Țîţu, IOP Conf. Mater. Sci. Eng. 1235[1] (2022) 2019-2026.
  •  
  • 4. C. Cappellini and A. Abeni, Int. J. Adv. Manuf. Technol. 120[3] (2022) 2055-2073.
  •  
  • 5. K. Zhuang, M. Li, F. Lin, C. Hu, J. Weng, Z. Gao, and C. Wu, Int. J. Adv. Manuf. Technol. 121 (2022) 6763-6781.
  •  
  • 6. I.P. Okokpujie, C.T. Akujieze, J.E. Sinebe, L.K. Tartibu, A. Adeoye, S.E. Kelechi, and E. Akinlabi, J. Adv. Res. Fluid Mech. 97[2] (2022) 8-25.
  •  
  • 7. M.A. Sofuoğlu, F.H. Çakır, S. Gürgen, S. Orak, and M.C. Kuşhan, J. Braz. Soc. Mech. Sci. Eng. 40[3] (2018) 1-12.
  •  
  • 8. G. Shi and H. Zhang, UPB Sci. Bull., Series D. 80[3] (2018) 1-10.
  •  
  • 9. A.K. Parida and K. Maity, Measurement. 133 (2019) 361- 369.
  •  
  • 10. M.A. Sofuoğlu, M.C. Kuşhan, and O.R.A.K. Sezan, J. Adv. Manuf. Eng. 2[2] (2021) 33-41.
  •  
  • 11. M. Lotfi, and S. Amini, P I MECH ENG E-J PRO. 232[4] (2018) 438-448.
  •  
  • 12. J. Airao and C.K. Nirala, Procedia CIRP. 102 (2021) 61- 66.
  •  
  • 13. K. Leksycki, E. Feldshtein, J. Lisowicz, R. Chudy, and R. Mrugalski, Metals. 10[9] (2020) 1187.
  •  
  • 14. J. Zhou, J. Ren, and Y. Jiang, Proc. Inst. Mech. Eng., Part B. 234[3] (2020) 584-599.
  •  
  • 15. E. Kaya and I. Kaya, Euro. J. Sci. Technol. [14] (2018) 164-168.
  •  
  • 16. F. Çakır, S.E.L.İ.M. Gürgen, M.E.H.M.E.T. Sofuoğlu, M.E.L.İ.H. Kuşhan, and S. Orak, Euro. J. Eng. Natural Sci. 3[2] (2019) 300-306.
  •  
  • 17. B. Shi, E. Abboud, M.H. Attia, and V. Thomson, Procedia CIRP. 108 (2022) 424-429.
  •  
  • 18. B. Denkena, A. Krödel, and A. Heckemeyer, CIRP J. Manuf. Sci. Technol. 35 (2021) 494-501.
  •  
  • 19. H. Xu, H. Zhou, Z. Ma, L. Dai, X. Jing, G. Li, and Y. Sun, Mater. 12[19] (2019) 3096-3100.
  •  
  • 20. B.S. Sahib and K.S. Nassrullah, IOP Conf. Mater. Sci. Eng. 671[1] (2020) 1100-1105.
  •  
  • 21. C.S. Kumar and S.K. Patel, Surf. Coat. Technol. 309 (2017) 266-281.
  •  
  • 22. V. Sivalingam, Z. Zan, J. Sun, B. Selvam, M.K. Gupta, M. Jamil, and M. Mia, Tribol. Int. 148 (2020) 106-111.
  •  
  • 23. V. Sivalingam, Y. Zhao, R. Thulasiram, J. Sun, and T. Nagamalai, Measurement. 174 (2021) 109-118.
  •  
  • 24. D. Pritima, G. Veerappan, L.M. Azaath, and M. Ravichandran, Surf. Topogr. Metrol. Prop. 10[2] (2022) 250-257.
  •  
  • 25. C.S. Kumar and S.K. Patel, J. Manuf. Process. 31 (2018) 336-347.
  •  
  • 26. V.N. Gaitonde, S.R. Karnik, L. Figueira, and J.P. Davim, Mater. Manuf. Process. 24[12] (2009) 1373-1382.
  •  
  • 27. S. Tooptong, D. Nguyen, K.H. Park, and P. Kwon, Wear 484 (2021) 203982.
  •  
  • 28. K. Aslantas, I. Ucun, and A. Cicek, Wear 274 (2012) 442- 451.
  •  
  • 29. A. Polishetty, M. Goldberg, G. Littlefair, M. Puttaraju, P. Patil, and A. Kalra, Procedia Eng. 97 (2014) 357-364.
  •  
  • 30. L.M. Azaath, E. Mohan, and U. Natarajan, Mater. Today: Proc. 37 (2021) 3731-3736.
  •  
  • 31. L.M. Azaath and U. Natarajan, Int. J. Mater. Res. 112[6] (2021) 486-497.
  •  
  • 32. J. Ren, J. Cai, J. Zhou, K. Shi, and X. Li, Int. J. Adv. Manuf. Technol. 97[9] (2018) 3671-3682.
  •  
  • 33. Seenivasan Murugesan, Venugopal Thangamuthu, Rohokale Milind Shivaji and Suresh Kumar, J. Ceram. Process. Res. 23[3] (2022) 367-372.
  •  
  • 34. T. Tamilanban, T.S. Ravikumar, C. Gopinath, and S. Senthilrajan, J. Ceram, Process. Res. 22[6] (2021) 629-635.
  •  
  • 35. K.M. Senthilkumar, A. Sivakumar, R.M. Shivaji, S.K. Tamang, and M. Giriraj, J. Ceram. Process. Res. 23[2] (2022) 233-236.
  •  

This Article

  • 2023; 24(3): 461-470

    Published on Jun 30, 2023

  • 10.36410/jcpr.2023.24.3.461
  • Received on Dec 23, 2022
  • Revised on Jan 28, 2023
  • Accepted on Feb 14, 2023

Correspondence to

  • D. Ananda Kumar

  • Department of Mechanical Engineering, JCT College of Engineering and Technology, Pichanur, Coimbatore, Tamilnadu, 641105, India
    Tel : +91 9787331840

  • E-mail: ananddesingh@gmail.com