Articles
  • Experimental investigations on mechanical and tribological behavior of AA7075 reinforced with ceramic particles

  • B. Thamaraikannana,*, A. Sagai Francis Brittob, S. Senthilrajac and R. Rajkumard

  • aKPR Institute of Engineering and Technology, Arasur, Coimbatore, Tamil Nadu, India
    bRohini College of Engineering & Technology, Palkulam, Tamil Nadu, India
    cSRM Institute of Science and Technology, Kattankulathur, Trichy, Tamil Nadu, India
    dKongu Engineering College, Erode, Tamil Nadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. P. Bagde, S.G. Sapate, R.K. Khatirkar, and N. Vashishtha, Tribol. Int. 121 (2018) 353-372.
  •  
  • 2. D. Aakash and M.K. Jain, Recent Res. Sci. Technol. 6 (2014) 30-35.
  •  
  • 3. E. Thostenson, C. Li, and T. Chou, Composites Sci. Technol. 65 (2005) 491-516.
  •  
  • 4. R. Karunanithi, Supriya Bera, and K.S. Ghosh, Mater. Sci. Eng. B 190 (2014) 133-143.
  •  
  • 5. H. Fallahdoost, H. Khorsand, R. Eslami-Farsani, and E. Ganjeh, Mater. Des. 57 (2014) 60-68.
  •  
  • 6. S. Natarajan, R. Narayanasamy, S.P. Kumaresh Babu, G. Dinesh, B. Anil Kumar, and K. Sivaprasad, Mater. Des. 30 (2009) 2521-2531.
  •  
  • 7. Hani Ameen, Am. J. Sci. Res. 2 (2011) 99-106.
  •  
  • 8. H.N. Reddappa, K.R. Suresh, and H.B. Niranjan, Int. J. Appl. Res. 2 (2011) 502-511.
  •  
  • 9. K. Umanath, S.T. Selvamani, and K. Palanikumar, Int. J. Eng. Sci. Technol. 3 (2011) 5441-5451.
  •  
  • 10. A.K. Mishra, V. Kumar, and R.K. Srivastava, National Conference on Manufacturing Innovation Strategies & Appealing Advancements MISAA, 2 (2014) 48278.
  •  
  • 11. Ashok Kr Mishra et al., J. Miner. Mater. Char. Eng. (2014) 2351-2361.
  •  
  • 12. Natarajan, S. et al., Mater. Des. (2009) 302521-302531.
  •  
  • 13. J. Babu Rao, D. Venkata Rao, I. Narasimha Murthy, and N.R.M.R. Bhargava, J. Int. J. Compos. Mater. 46 (2012) 1393-1404.
  •  
  • 14. K.M. Shorowordi, T. Laoui, A.S.M.A. Haseeb, J.P. Celis, and L. Froyen, J. Mater. Process. Technol. 142 (2003) 738-743.
  •  
  • 15. B. Suresh Babu, G. Chandramohan, C. Boopathi, T. Pridhar, and R. Srinivasan, J. Ceram. Process. Res. 19[1] (2018) 69-74.
  •  
  • 16. K.-H. Lin, K.-L. Wang, and Y.-T. Tsai, J. Ceram. Process. Res. 21[1] (2020) 103-112.
  •  
  • 17. S.M. Soa, H.W. Hwang, S.H. Yia, J.S. Park, K.H. Kim, K.H. Lee, J. Park, and S.G. Lee, J. Ceram. Process. Res. 21[S1] (2020) S16-S22.
  •  

This Article

  • 2023; 24(3): 415-421

    Published on Jun 30, 2023

  • 10.36410/jcpr.2023.24.3.415
  • Received on May 18, 2022
  • Revised on Sep 25, 2022
  • Accepted on Sep 26, 2022

Correspondence to

  • B. Thamaraikannan

  • KPR Institute of Engineering and Technology, Arasur, Coimbatore, Tamil Nadu, India
    Tel : +91 7339266800

  • E-mail: thamaraikannan254@gmail.com