Articles
  • Experimental fabrication and analysis of AA1050-Cu of dissimilar fsw joint

  • A. Mahabubadshaa and K. Anandavelub,*

  • aAssistant Professor, Department of Mechanical Engineering, MRK Institute of Technology, Kattumannarkoil - Tamilnadu 608301
    bProfessor, Department of Mechanical Engineering, MRK Institute of Technology, Kattumannarkoil - Tamilnadu 60830

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. T. Solchenbach and P. Plapper, Opt. Laser. Technol. 54 (2013) 249-256.
  •  
  • 2. M.S.M. Isa, K. Moghadasi, M.A. Ariffin, S. Raja, M.R.b. Muhamad, F. Yusof, M.F. Jamaludin, N.b. Yusoff, and M.S. Ab Karim, J. Mat. Res. Tech. 15 (2021) 2735-2780.
  •  
  • 3. F.A. Besler, P. Schindele, R.J. Grant, and M.J.R. Stegmüller, J. Mater. Process. Technol. 234 (2016) 72-83.
  •  
  • 4. N. Sharma, A.N. Siddiquee, Z.A. Khan, and M.T. Mohammed, Mat. Manuf. Process. 33[7] (2018) 786-794.
  •  
  • 5. P. Xue, B.L. Xiao, D.R. Ni, and Z.Y. Ma, Mater. Sci. Eng. A. 527[21] (2010) 5723-5727.
  •  
  • 6. G. Sun, J. Niu, D. Wang, and S. Chen, Fatigue. Fract. Eng. Mater. Struct. 38[4] (2015) 445-455.
  •  
  • 7. P. Carlone, A. Astarita, G.S. Palazzo, V. Paradiso, and A. Squillace, Int. J. Adv. Manuf. Technol. 79[5] (2015) 1109-1116.
  •  
  • 8. B. Cai, Z.Q. Zheng, D.Q. He, S.C. Li, and H.P. Li, J. Alloys Compd. 649 (2015) 19-27.
  •  
  • 9. A.Q. Al-Roubaiy, S.M. Nabat, and A.D.L. Batako, Int. J. Adv. Manuf. Technol. 71[9] (2014) 1631-1642.
  •  
  • 10. T. Le Jolu, T.F. Morgeneyer, A. Denquin, M. Sennour, A. Laurent, J. Besson, and A.-F. Gourgues-Lorenzon, Metall. Mater. Trans. A. Phys. Metall. Mater. Sci. 45[12] (2014) 5531-5544.
  •  
  • 11. S. Celik and R. Cakir, Metals. 6[6] (2016) 133.
  •  
  • 12. N.A. Muhammad, C. Wu, and H. Su, J. Mater. Res. Technol. 14 (2021) 1035-1051.
  •  
  • 13. D.K. Yaduwanshi, S. Bag, and S. Pal, Mater. Manuf. Process. 33[3] (2018) 277-287.
  •  
  • 14. A.G. Wiedenhoft, H.J.d. Amorim, T.d.S. Rosendo, M.A.D. Tier, and A.J.M.R. Reguly, Mat. Res. 21[4] (2018) e20170983.
  •  
  • 15. Q.-Z. Zhang, W.-B. Gong, and W. Liu, T. Nonferr. Metal. Soc. 25[6] (2015) 1779-1786.
  •  
  • 16. P. Muthurasu and M. Kathiresan, J. Ceram. Process. Res. 22[6] (2021) 697-704.
  •  
  • 17. A.N. Salah, H. Mehdi, A. Mehmood, A.W. Hashmi, C. Malla, and R. Kumar, Mater. Today: Proc. 56[4] (2022) 1675-1683.
  •  
  • 18. X. Wang and D.A. Lados, J. Adv. Joining Process. Res. 22[1] (2021) 16-24.
  •  
  • 19. R. Pandiyarajan and M.P. Prabakaran, J. Ceram. Process. Res. 21[6] (2020) 690-698.
  •  
  • 20. C. Chanakyan and S. Sivasankar, J. Ceram. Process. Res. 21[6] (2020) 647-655.
  •  
  • 21. N. Sharma, Z.A. Khan, A.N. Siddiquee, and T. Nonferr. Metal. Soc. 27[10] (2017) 2113-2136.
  •  
  • 22. K.P. Mehta and V.J. Badheka, Mater. Manuf. Proc. 31[3] (2016) 233-254.
  •  
  • 23. S. Shankar, P. Vilaça, P. Dash, S. Chattopadhyaya, and S. Hloch, Measurement. 146 (2019) 892-902.
  •  
  • 24. P. Gopi Krishnan, B. Suresh Babu, and K. Siva, J. Ceram. Process. Res. 21[2] (2020) 157-163.
  •  
  • 25. K. Periasamy, N. Sivashankar, R. Viswanathan, and J. Balaji, J. Ceram. Process. Res. 23[3] (2022) 335-343.
  •  
  • 26. P. Xue, D.R. Ni, D. Wang, B.L. Xiao, and Z.Y. Ma, Mater. Sci. Eng. A. 528[13] (2011) 4683-4689.
  •  
  • 27. Y. Wei, H. Li, P. Xiao, and J. Zou, Adv. Mater. Sci. Eng. 2020 (2020) 6845468.
  •  
  • 28. R. Crushan and P. Ashoka Varthanan, J. Ceram. Process. Res. 22[6] (2021) 620-628.
  •  
  • 29. R. Girimurugan, J. Bensamraj, and S. Karthick, J. Ceram. Process. Res. 23[4] (2022) 553-557.
  •  
  • 30. W. Tian, H. Su, and C. Wu, Int. J. Adv. Manuf. Technol. 107[1] 2020 59-71.
  •  
  • 31. S.A.A. Dilawary, A. Motallebzadeh, E. Atar, and H. Cimenoglu, Tribol. Int. 127 (2018) 288-295.
  •  
  • 32. A. Kanakaraj, R. Mohan, and R. Viswanathan, J. Ceram. Process. Res. 23[3] (2022) 268-277.
  •  
  • 33. G. Rajaram, S. Kumaran, and T.S. Rao, Mater. Sci. Eng. A. 528[1] (2010) 247-253.
  •  
  • 34. A.M. Dubey, A. Kumar, and A.K. Yadav, J. Mater. Process. Technol. 240 (2017) 87-97.
  •  
  • 35. R. Srinivasan, B. Suresh Babu, P. Prathap, R. Whenish, R. Soundararajan, and G. Chandramohan, J. Ceram. Process. Res. 22[1] (2021) 16-24.
  •  

This Article

  • 2023; 24(2): 274-284

    Published on Apr 30, 2023

  • 10.36410/jcpr.2023.24.2.274
  • Received on Aug 15, 2022
  • Revised on Oct 14, 2022
  • Accepted on Nov 19, 2022

Correspondence to

  • K. Anandavelu

  • Professor, Department of Mechanical Engineering, MRK Institute of Technology, Kattumannarkoil - Tamilnadu 60830
    Tel : 9444206138

  • E-mail: anandavel01@yahoo.com