Articles
  • Tribological and characterization studies of aluminium alloy 6061 reinforcement with aluminium oxide and copper metal matrix composites

  • D. Elil Raja*, S. Prathap Singh, V. Rangarajan and M. Chrispin Das

  • Department of Mechanical Engineering, St. Joseph’s Institute of Technology, OMR, Chennai, Tamilnadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. L. Poovazhagan, K. Kalaichelvan, A. Rajadurai, and V. Senthilvelan, Procedia Eng. 64 (2013) 681-689.
  •  
  • 2. A. M. Al-Qutub, A. Khalil, N. Saheb, and A. S. Hakeem, Wear 297 (2013) 752-761.
  •  
  • 3. K. Umanath, K. Palanikumar, and S. T. Selvamani, Comp. Part B: Eng. 53 (2013) 159-168.
  •  
  • 4. K. Umanath, S.T. Selvamani, and K. Palanikumar, Int J of Eng. Sci and Tech. 3 (2011) 5441-5551.
  •  
  • 5. G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj, and M. S. Bhagyashekar, J of Min Mat Cheract Eng. 9 (2011) 454-461,
  •  
  • 6. H. C. Anilkumar, H. S. Hebbar, and K. S. Ravishankar, Int J of Mech and Mat. Eng. 6 (2011) 225-233.
  •  
  • 7. M. Asif, K. Chandra, and P. S. Misra, J of Min Mat Cheract Eng. 10 (2011) 115-134.
  •  
  • 8. D. Singh, H. Singh, S. Kumar, and G. Singh, Int. Journal on Emer. Tech. 3 (2012) 178-184.
  •  
  • 9. V. N. Gaitonde1, S. R. Karnik, and M. S. Jayaprakash, J of Min Mat Cheract Eng. 11 (2012) 695-703.
  •  
  • 10. R. Sharanabasappa and B. S. Motgi, IOSR J of Mech and Civil Eng. 7 (2013) 14-21.
  •  
  • 11. D. Kuma and J. Singh, Int. J of Eng Res App. 1 (2014) 31-36.
  •  
  • 12. C. C. Wang and B. H. Yan, J of Mat Process Tech. 102 (2000) 90-102.
  •  
  • 13. B. H. Yan and C. C. Wang, J of Mat Process Tech. 95 (1999) 222-231.
  •  
  • 14. B. H. Yan, C. C. Wang, W. D. Liu, and F. Y. Huang, Int J of Adv Manu Tech. 16 (2000) 322-333.
  •  
  • 15. G. B. Veeresh Kumar, C. S. P. Rao, N. Several, and M. S. Bhagyshekar, J of Min Mat Chract Eng. 9 (2010) 43-55.
  •  
  • 16. Y. Sahin, M. Kok, and H. Celik, J of Mat Process Tech. 128 (2002) 280-291.
  •  
  • 17. J. P. Davim, J of Mat Process Tech. 132 (2003) 340-344.
  •  
  • 18. E. Kiliçkap, O. Çakir, M. Aksoy, and A. Inan, J of Mat Process Tech. 164-165 (2005) 862-867.
  •  
  • 19. A. Metin Kok, in Pro. of the 11th Inorg Bond Fib. Comp. Conf. 1 (2008) 272-281.
  •  
  • 20. C. A. Brown and M. K. Surappa, Mat. Sci. and Eng. 102 (1998) 31-37.
  •  
  • 21. M. Kök and K. Özdin, J of Mat Process Tech. 183 (2007) 301-309.
  •  
  • 22. H. Kato, M. Takama, Y. Iwai, K. Washida, and Y. Sasaki, Wear 255 (2003) 573-578.
  •  
  • 23. A. Baradeswaran, S. C. Vettivel, A. Elaya Perumal, N. Selvakumar, and R. Franklin Issac, Mat. and Des. 63 (2014) 620-632.
  •  
  • 24. A. Baradeswaran and A. Elaya Perumal, Comp. Part B: Eng. 56 (2014) 464-471.
  •  
  • 25. S. Mahdavi and F. Akhlaghi, Trib Letts 44 (2011) 1-12.
  •  
  • 26. M. Rajeshwaran, B. Shreeram, T. Thangeeswari, and D. Elil Raja, J. Ceram. Process. Res. 23 (2022) 459-465.
  •  
  • 27. R. Sivabalana, K. R. Thangadurai and K. Lenin, J. Ceram. Process. Res. 22 (2021) 605-614.
  •  
  • 28. T. Tamilanban,T. S. Ravikumar, C. Gopinath, and S. Senthilraj, J. Ceram. Process. Res. 22 (2021) 629-635.
  •  
  • 29. A. Kanakaraj, R. Mohan R and R. Viswanathan, J. Ceram. Process. Res. 23 (2022) 268-277.
  •  

This Article

  • 2022; 23(6): 926-933

    Published on Dec 31, 2022

  • 10.36410/jcpr.2022.23.6.926
  • Received on Sep 16, 2022
  • Revised on Oct 12, 2022
  • Accepted on Oct 26, 2022

Correspondence to

  • D. Elil Raja

  • Department of Mechanical Engineering, St. Joseph’s Institute of Technology, OMR, Chennai, Tamilnadu, India
    Tel : +91-9443949827 Fax: +04424503132

  • E-mail: elilraja76@gmail.com