Articles
  • Machining performance and optimization of inconel 718 using MWCNT by taguchi’s method

  • Sriharrish Kumara,*, Sureshkannan Gurusamyb, Vivek Sivakumarc and Senthil Murugan Vaiyapurid

  • aDepartment of Mechanical Engineering, Hindusthan College of Engineering and Technology, Coimbatore, Tamilnadu
    bDepartment of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore, Tamilnadu
    cDepartment of Civil Engineering, Hindusthan college of Engineering and Technology, Coimbatore, Tamilnadu
    dDepartment of Mechanical Engineering, Hindusthan college of Engineering and Technology, Coimbatore, Tamilnadu

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. M.A. Xavior, P. Mahesh, M. Abheek, R. Mrinal, L. Nitesh, IOP Conf. Series, Materials Science and Engineering, 149[1] (2019).
  •  
  • 2. P. Pooja, S.S. Karidkar, Int. J. Eng. Res. Technol. 8[0665] (2019) 2588-96.
  •  
  • 3. G. Pengfei, L. Xin, Z. Yufeng, H. Weidong, Int. J. Electrochem. Soc. 11[165] (2018) 546-555.
  •  
  • 4. M.A. Xavior, M. Manohar, P.M. Madhukar, P. Jeyapandiarajan, Trans. Can. Soc. Mech. Eng. 41[3] (2017).
  •  
  • 5. A.K. Parida. American J. Mech. Mater. Eng. 1[2] (2017) 49-57.
  •  
  • 6. S. Param, Y. Vinod, N. Audhesh, J. Adv. Manuf. Sys. 17[1] (2018) 89-105.
  •  
  • 7. T.N. Mayur, T.M. Shete, Int. Res. J. Eng. Technol. 4[4] (2017).
  •  
  • 8. S. Bapi, R.M. Mohan, D. Sujan, MATEC Web of Conferences, 95[02009] (2017).
  •  
  • 9. K. Abhishek, Int. J. Mech. Eng. Technol. 8[7] (2017) 1830-1836.
  •  
  • 10. T. Hamid, Y.M. Athmane, K. Riad, B. Salim, M. Ikhlas, G. Francois, Int. J. Industr. Eng. Comput. 7 (2016) 111-134.
  •  
  • 11. A.N. Arasu, S. Vivek, J. Robinson and T.T. Ranjith, Experimental analysis of waste foundry sand in partial replacement of fine aggregate in concrete. International Journal of Chem Tech Research Coden 10[8] (2017) 605-622.
  •  
  • 12. R. Prabhu, R. Anuradha and S. Vivek, Experimental Research on Triple Blended Self-Compacting Geo Polymer Concrete, Asian Journal of Engineering and Applied Technology 5[2] (2016) 15-21.
  •  
  • 13. S. Vivek, K. Janani, M. Divyadharsini, C.M. Dharmalingam, S. Srinivasan et al., Experimental Research on Concrete by using Red Mud, Foundry Sand, ConplastSP430 -as a Partial Replacement of Fine Aggregates, International Journal of ChemTech Research, 10[8] (2017) 739-749.
  •  
  • 14. S. Jose, A.R. Krishnaraja, P. Kulanthaivel, P. Ramshankar, V.H. Wilson et al., Performance of Polyvinyl Alcohol and Polypropylene Fibers under Simulated Cementitious Composites Pore Solution,Advances in Materials Science and Engineering, 2022 (2022) 1-7.
  •  
  • 15. S.R. Murugesan, V. Sivakumar, S. Velusamy, G. Ravindiran, P. Sundararaj, V. Maruthasala et al., Biosorption of Malachite Green from Aqueous Phase by Tamarind Fruit Shells Using FBR,Advances in Materials Science and Engineering 2022 (2022) 1-7.
  •  
  • 16. S. Velusamy, A. Subbaiyan, S.R. Murugesan, M. Shanmugamoorthy, V. Sivakumar et al., Comparative Analysis of Agro Waste Material Solid Biomass Briquette for Environmental Sustainability,Advances in Materials Science and Engineering 2022 (2022) 1-7.
  •  

This Article

  • 2022; 23(6): 869-877

    Published on Dec 31, 2022

  • 10.36410/jcpr.2022.23.6.869
  • Received on May 27, 2022
  • Revised on Jul 12, 2022
  • Accepted on Jul 21, 2022

Correspondence to

  • Sriharrish Kumar

  • Department of Mechanical Engineering, Hindusthan College of Engineering and Technology, Coimbatore, Tamilnadu
    Tel : + 91-99940-59596

  • E-mail: sriharrishkumar@gmail.com