Articles
  • Effect of Al2O3/PSZ and Al2O3/YSZ ceramic coating in CI engine fueled with ternary blends of castor seed oil and jatropha oil biodiesel dosed with diesel

  • P. Mohan Kumara,*, V.C. Uvarajab and P. Madhuc

  • aDepartment of Mechanical Engineering, Jayalakshmi Institute of Technology, Thoppur, Dharmapuri-636352, Tamil Nadu, India
    b    Department of Mechanical Engineering, Bannari Amman Institute of Technology, Dathyamangalam-638401, Tamil Nadu, India
    c    Department of Mechanical Engineering, Karpagam College of Engineering, Coimbatore-641032, Tamil Nadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. C. Vibhakar, R.S. Sabeenian, S. Kaliappan, P.Y. Patil, P.P. Patil, P. Madhu, C. Sowmya Dhanalakshmi, and H.A. Birhanu, Adv. Mater. Sci. Eng. 2022 (2022) 8175552 .
  •  
  • 2. X. Li, J. Ceram. Process. Res. 23[1] (2022) 53-56.
  •  
  • 3. A.S. Kumar, S. Yuvaraj, and S. Janaki, J. Ceram. Process. Res. 21[2] (2020) 217-225.
  •  
  • 4. E.F. Aransiola, E. Betiku, D.I.O. Ikhuomoregbe, and T.V. Ojumu, Afr. J. Biotechnol. 11[22] (2012) 6178-6186.
  •  
  • 5. M.G.R.M. Mofijur, A.M. Rasul, J. Hyde, A.K. Azad, R. Mamat, and M.M.K. Bhuiya, Renew. Sustain. Energy Rev. 53 (2016) 265-278.
  •  
  • 6. K. Thakkar, S.S. Kachhwaha, P. Kodgire, and S. Srinivasan, Renew. Sustain. Energy Rev. 137 (2021) 110468.
  •  
  • 7. P. Kumar, M.P. Sharma, and G. Dwivedi, Egypt. J. Pet. 25[2] (2016) 255-261.
  •  
  • 8. K. Sudalaiyandi, K. Alagar, M.P. VJ, and P. Madhu, Fuel 285 (2021) 119255.
  •  
  • 9. D. Raguraman, A. Kumar, S. Prasanna Raj Yadav, P.Y. Patil, J. Samson Isaac, C. Sowmya Dhanalakshmi, P. Madhu, and J. Isaac JoshuaRamesh Lalvani, Adv. Mater. Sci. Eng. 2021 (2021) 3728852 .
  •  
  • 10. G. Goga, B.S. Chauhan, S.K. Mahla, and H.M. Cho, Energy Rep. 5 (2019) 78-83.
  •  
  • 11. J.L.S. Fagundez, D. Golke, M.E.S. Martins, and N.P.G. Salau, Energy 176 (2019) 521-530.
  •  
  • 12. A. Srivastava and R. Prasad, Renew. Sustain. Energy Rev. 4[2] (2000) 111-133.
  •  
  • 13. P. Appavu, V.R. Madhavan, H. Venu, and A. Mariadoss, Int. J. Ambient Energy 42[15] (2021) 1803-1809.
  •  
  • 14. A. Chattarki and K.G. Basavakumar, Thermal Barrier Coating on IC Engines; A Review. In Recent Trends in Mechanical Engineering (pp. 47-68). Springer, Singapore (2021).
  •  
  • 15. C. Gatzen, D.E. Mack, O. Guillon, and R. Vaßen, Adv. Eng. Mater. 22[6] (2020) 2000087.
  •  
  • 16. M. Farahmandjou and N. Golabiyan, J. Ceram. Process. Res. 16[2] (2015) 1-4.
  •  
  • 17. A. Maryam and H.P. Mohammad, J. Ceram. Process. Res. 23[2] (2022) 188-198.
  •  
  • 18. I.J. Kim, J. Ceram. Process. Res. 11[4] (2009) 411-418.
  •  
  • 19. M. Mohamed Musthafa, S.P. Sivapirakasam, and M. Udayakumar, Energy 36[5] (2011) 2343-2351.
  •  
  • 20. J. Zhu and K. Ma, Theor. Appl. Mech. Lett. 4[2] (2014) 021008.
  •  
  • 21. I. Taymaz, K. Çakır, and A. Mimaroglu, Surf. Coat. Technol. 200[1-4] (2005) 1182-1185.
  •  
  • 22. S. Praveen Raman, S. Kishnamoorthi, and S. Nagendran, Int. J. Adv. Res. Ideas Innov. 4[3] (2018) 2256-2262.
  •  
  • 23. T. Hejwowski and A. Weroński, Vacuum 65[3-4] (2002) 427-432.
  •  
  • 24. C. Ozturk and T. Demircan, J. Ceram. Process. Res. 21[4] (2020) 443-441.
  •  
  • 25. W. Zielecfei, P. Pawlus, R. Perłowski, and A. Dzierwa, Arch. Civ. Mech. Eng. 13[2] (2013) 175-185.
  •  
  • 26. B. Işcan, J. Energy Inst. 89[1] (2016) 150-157.
  •  
  • 27. M.M. Musthafa, S.P. Sivapirakasam, and M. Udayakumar, J. Renew. Sustain. Energy 2[5] (2010) 053105.
  •  
  • 28. V. Karthickeyan and P. Balamurugan, Heat and Mass Transfer 53[10] (2017) 3141-3154.
  •  
  • 29. R. Thirunavukkarasu and S. Periyasamy, Arabian J. Sci. Eng. 45[11] (2020) 9699-9707.
  •  
  • 30. G. Venkadesan and J. Muthusamy, Ceram. Int. 45[3] (2019) 3166-3176.
  •  
  • 31. M. Nejati, M.R. Rahimipour, and I. Mobasherpour, Ceram. Int. 40[3] (2014) 4579-4590.
  •  
  • 32. C. Zhou, N. Wang, and H. Xu, Mater. Sci. Eng.: A, 452 (2007) 569-574.
  •  
  • 33. H. Jamali, R. Mozafarinia, R.S. Razavi, and R. Ahmadi-Pidani, Ceram. Int. 38[8] (2012) 6705-6712.
  •  
  • 34. C.R.C. Lima, N. Cinca, and J.M. Guilemany, Ceram. Int. 38[8] (2012) 6423-6429.
  •  
  • 35. F. Zhou, Y. Wang, Z. Cui, L. Wang, J. Gou, Q. Zhang, and C. Wang, Ceram. Int. 43[5] (2017) 4102-4111.
  •  
  • 36. H.X. Wu, Z. Ma, L. Liu, Y.B. Liu, and D.Y. Wang, Ceram. Int. 42[11] (2016) 12922-12927.
  •  
  • 37. D. Das, G. Majumdar, R.S. Sen, and B.B. Ghosh, Journal of The Institution of Engineers (India): Series C, 95[1] (2014) 63-68.
  •  
  • 38. F. Stroke, Am. J. Mech. Eng. 2[6] (2014) 151-158.
  •  
  • 39. C. Yao, J. Hu, P. Geng, J. Shi, D. Zhang, and Y. Ju, Fuel 206 (2017) 593-602.
  •  
  • 40. S. Özel, E. Vural, and M. Binici, Fuel 263 (2020) 116537.
  •  
  • 41. A.K. Agarwal, H. Karare, and A. Dhar, Fuel Process. Technol. 121 (2014) 16-24.
  •  
  • 42. G. Sivakumar and S.S. Kumar, Alex. Eng. J. 53[4] (2014) 787-794.
  •  
  • 43. A.M. Mellor, J.P. Mello, K.P. Duffy, W.L. Easley, and J.C. Faulkner, Skeletal Mechanism for NOx Chemistry in Diesel Engines. SAE Transactions, (1998) 786-801.
  •  
  • 44. T. Ma, D. Chen, H. Wang, M. Yao, and A. Xu, Fuel 303 (2021) 121259.
  •  
  • 45. K.S. Senthil, K. Purushothaman, and K. Rajan, Therm. Sci. 21 (2017) 489-498.
  •  

This Article

  • 2022; 23(5): 647-655

    Published on Oct 31, 2022

  • 10.36410/jcpr.2022.23.5.647
  • Received on Mar 11, 2022
  • Revised on Mar 24, 2022
  • Accepted on Jun 4, 2022

Correspondence to

  • P. Mohan Kumar

  • Department of Mechanical Engineering, Jayalakshmi Institute of Technology, Thoppur, Dharmapuri-636352, Tamil Nadu, India
    Tel : +91 9489921230

  • E-mail: mohan2989@gmail.com