Articles
  • Influence of cowpat ash particles on micro structure, mechanical and tribological properties of Al 7075 composites

  • B. Varuna,*, S. Gopib and R. Manikandanc

  • aAssistant Professor, Department of Mechanical Engineering, Sri Ramakrishna Institute of Technology, Coimbatore 641 010, Tamil Nadu, India
    bAssociate Professor, Department of Production Engineering, Government College of Technology, Coimbatore 641 013, Tamil Nadu, India
    cAssistant Professor, Department of Mechatronics Engineering, Sri Krishna College of Engineering and Technology, Coimbatore 641 008, Tamil Nadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. H.C. Alexander Chee, R.S.K. Singh, and K.Y. Sara Lee. J. Ceram. Process. Res. 22[3] (2021) 289-295.
  •  
  • 2. V. Vijayakumar, P. Johnson, R. Whenish, A.J. Rajan, and V.H. Wilson, J. Ceram. Process. Res. 22[4] (2021) 401-408.
  •  
  • 3. X. Zhu, H. Dong, and K. Lu. Surf. Coat. Technol. 202[13] (2008) 2927-2934.
  •  
  • 4. J. Hashim, L. Looney, and M.S.J. Hashmi. J. Mater. Process. Technol. 123[2] (2002): 258-263.
  •  
  • 5. G.G. Sozhamannan, S.B. Prabu, and V.S.K. Venkatagalapathy. J. Surf. Eng. Mater. Adv. Technol. 2 (2012) 11-15.
  •  
  • 6. S.B. Prabu, L. Karunamoorthy, S. Kathiresan, and B. Mohan, J. Mater. Process. Technol. 171[2] (2006) 268-273.
  •  
  • 7. M. Aizenshtein, N. Froumin, E. Shapiro-Tsoref, M.P. Dariel, and N. Frage, Scripta Materialia 53[11] (2005) 1231-1235.
  •  
  • 8. J. Jung, and S. Kang. J. American Ceram. Soc. 87[1] (2004) 47-54.
  •  
  • 9. F. Toptan, A. Kilicarslan, A. Karaaslan, M. Cigdem, and I. Kerti, Mater. Des. 31 (2010) S87-S91.
  •  
  • 10. K.K. Alaneme and A.O. Aluko, Scientia Iranica 19[4] (2012) 992-996.
  •  
  • 11. N. Radhika and R. Raghu, Tribology in Industry 37[1] (2015) 20.
  •  
  • 12. K. Ravi Kumar, K. Kiran, and V.S. Sreebalaji, J. Alloys Comp. 723 (2017): 795-801.
  •  
  • 13. V.R. Rao, N. Ramanaiah, and M.M.M. Sarcar, Int. J. Adv. Sci. Technol. 88 (2016) 13-26.
  •  
  • 14. R.K. Uyyuru, M.K. Surappa, and S. Brusethaug, Tribology Int. 40[2] (2007) 365-373.
  •  
  • 15. N. Radhika and R. Raghu, J. Tribology 139[4] (2017) 041602.
  •  
  • 16. S. Sakthivel, R. Manikandan, and T.V. Arjunan, Int. J. Adv. Eng. Emer. Technol. 7[4] (2016).
  •  
  • 17. R. Manikandan and T.V. Arjunan, Int. J. Appl. Eng. Res. (2015)
  •  
  • 18. V.R. Rao, N. Ramanaiah, and M.M.M. Sarcar, Appl. Mech. Mater. 592 (2014) 349-353.
  •  
  • 19. M. Shahid. R.A. Malik, H. Alrobei, J. Kim, M. Latif, A. Hussain, M. U. Iqbal, and A. Hafiz, J. Ceram. Process. Res. 22[2] (2021) 149-157.
  •  
  • 20. T. Boyraz and A. Akkus, J. Ceram. Process. Res. 22[2] (2021) 226-231.
  •  
  • 21. J. Umar Mohamed, PL. K. Palaniappan, P. Maran, and R. Pandiyarajan, J. Ceram. Process. Res. 22[3] (2021) 306-316.
  •  
  • 22. P. Viensiri, S. Wattanasiriwech, and D. Wattanasiriwech, J. Ceram. Process. Res. 22[3] (2021) 323-328.
  •  
  • 23. M. Manoj, G.R. Jinu, T. Muthuramalingam, and R.L.B. Singh, J. Ceram. Process. Res. 22[4] (2021) 475-481.
  •  
  • 24. R. Manikandan and T.V. Arjunan, Metal. Mater. Int. 27[5] (2021) 885-899.
  •  
  • 25. Y.R. Loh, D. Sujan, M.E. Rahman, and C.A. Das, Resources, Conservation and Recycling 75 (2013) 14-22.
  •  
  • 26. V.S. Aigbodion, S.B. Hassan, E.T. Dauda, and R.A. Mohammed, J. Miner. Mater. Charact. Eng. 9[10] (2010) 907-917.
  •  
  • 27. M. Arulraj and P.K. Palani, J. Brazilian Soc. Mech. Sci. Eng. 40[1] (2018) 1-10.
  •  
  • 28. R. Manikandan, T.V. Arjunan, Akhil R. Nath O.P, Compos, Part B 183 (2020) 107668.
  •  
  • 29. O.P. Stru, E. Hibridnega, and M.N.O. Aluminija, Optimization 263 (2019) 268.
  •  
  • 30. R Manikandan and T.V. Arjunan, Mater. Res. Express 7[1] (2020) 016584.
  •  
  • 31. D. Siva Prasad and A. Rama Krishna., Int. J. Adv. Sci. Technol. 33 (2019) 51-58.
  •  
  • 32. R. Manikandan, T.V. Arjunan, J. Chinese Soc. Mech. Eng. 41[4] (2020) 503-511
  •  
  • 33. K.K. Alaneme, I.B. Akintunde, P.A. Olubambi, and T.M. Adewale, J. Mater. Res. Technol. 2[1] (2013) 60-67.
  •  
  • 34. K.K. Alaneme, B.O. Ademilua, and M.O. Bodunrin, Tribology in Industry 35[1] (2013) 25.
  •  
  • 35. G. Narasaraju and D. Linga Raju, Mater. Today: Proceedings 2[4] (2015) 3056-3064.
  •  
  • 36. J.E. Oghenevweta, V.S. Aigbodion, G.B. Nyior, and F. Asuke, J. King Saud Univ. 28[2] (2016) 222-229.
  •  
  • 37. K.K. AlanemeaΨ and A.O. Alukob, The West Indian Journal of Engineering 34[1] (2012) 2.
  •  
  • 38. K.K. Alaneme amd T.M. Adewale, Tribology in Industry 35 (2013) 163-172.
  •  
  • 39. A.M. Usman, A. Raji, N.H. Waziri, and M.A Hassan, IOSR J. Mech. Civil Eng. 11[4] (2014) 38-44.
  •  
  • 40. M. Cao, X. Jin, L. Chen, L. Dong, B. Li, and X. Zhangn, J. Ceram. Process. Res. 22[4] (2021) 377-385.
  •  
  • 41. S.D. Saravanan and M. Senthilkumar, Int. J. Eng. Technol. 5[6] (2014) 4834-4840.
  •  
  • 42. H. Singh, G. Singh, and A. Aggarwal, Int. J. Res. Mech. Eng. Technol. 4 (2014) 143-145.
  •  
  • 43. N.F. Mohd Joharudin, N. Abdul Latif, M.S. Mustapa, M.N. Mansor, W.A. Siswanto, J. Murugesan, and F. Yusof, Materialwiss. Werkstofftech. 50[3] (2019) 283-8.
  •  
  • 44. N. Kawin, D. Jagadeesh, G. Saravanan, and K. Periasamy, Mater. Today: Proceedings 21 (2020) 474-476.
  •  
  • 45. L. Venkatesh, T.V. Arjunan, and K. Ravikumar, J. Brazilian Soc. Mech. Sci. Eng. 41[7] (2019) 1-13.
  •  
  • 46. S. Shamim, H. Singh, C. Sasikumar, and D.K. Yadav, Mater. Today: Proceedings 4[2] (2017) 2887-2892.
  •  
  • 47. R.S.S. Raju, M.K. Panigrahi, R.I. Ganguly, and G.S. Rao, Tribology International 129 (2019) 55-66.
  •  
  • 48. L. Natrayan, V. Sivaprakash, and M.S. Santhosh, Int. J. Eng. Adv. Technol. 8 (2018) 366-371.
  •  
  • 49. A.M. Hamzah, S.K. Zakaria, S.Z. Salleh, A.H. Yusoff, A. Ali, M. Mohamad, M.N. Masri, S.A. Sobri, M.A.A. Taib, F. Budiman, and P.T. Teo, J. Ceram. Process. Res. 22 (2021) 200-207.
  •  
  • 50. D.Q. Minh, T.V. Khai, H.N. Minh, N.V.U. Nhi, and K.D.T. Kien, J. Ceram. Process. Res. 22[2] (2021) 246-251.
  •  
  • 51. T. Nithyanandhan and R. Ramamoorthi, J. Ceram. Process. Res. 22[4] (2021) 369-376.
  •  
  • 52. K. Ravikumar, K. Kiran, and V.S. Sreebalaji, Measurement 102 (2017) 142-149.
  •  
  • 53. S.R. Prabhu, A.K. Shettigar, M.A. Herbert, and S.S. Rao, Trans. Nonferrous Met. Soc. China 29[11] (2019) 2229-2236.
  •  
  • 54. P. Dong, H. Zhao, F. Chen, and J. Li, Trans. Nonferrous Met. Soc. China 23[8] (2013) 2222-2228.
  •  
  • 55. B.A. Kumar and N. Murugan, Mater. Des. 40 (2012) 52-58.
  •  
  • 56. L. Zhong, Y. Zhao, S. Zhang, G. Chen, S. Chen, and Y. Liu, Trans. Nonferrous Met. Soc. China 23[9] (2013) 2502-2508.
  •  
  • 57. X. Li, G. Zu, and P. Wang, Trans. Nonferrous Met. Soc. China 25[1] (2015) 36-45.
  •  
  • 58. I. Balasubramanian and R. Maheswaran, Mater. Des. 65 (2015) 511-520.
  •  
  • 59. A.F. Boostani, S. Tahamtan, Z.Y. Jiang, D. Wei, S. Yazdani, R.A. Khosroshahi, R.T. Mousavian, J. Xu, X. Zhang, and D. Gong, Comp. Part A 68 (2015) 155-163.
  •  
  • 60. T.H. Nam, G. Requena, and P. Degischer, Comp. Part A 39[5] (2008) 856-865.
  •  
  • 61. A. Baradeswaran, S.C. Vettivel, A.E. Perumal, N. Selvakumar, and R.F. Issac, Mater. Des. 63 (2014) 620-632.
  •  
  • 62. M.A. Maleque, A.A. Adebisi, and N. Izzati, Mater. Sci. Eng. 184[1] (2017) 012031.
  •  
  • 63. V. Constantin, L. Scheed, and J. Masounave, J. Tribol. 121 (1999) 787-794.
  •  
  • 64. P.K. Rohatgi, Y. Liu, and T.L. Barr, Metallurgical Transactions A 22[6] (1991) 1435-1441.
  •  
  • 65. S.C. Tjong, S.Q Wu, and H.C Liao, Comp. Sci. Technol. 57[12] (1998) 1551-1558.
  •  
  • 66. A. Urena, J. Rams, M. Campo, and M. Sanchez, Wear 266[11] (2009) 1128-1136.
  •  
  • 67. R.F. Gunst, Technometrics, 38 (1996) 284-286.
  •  
  • 68. A.J. Sedriks and T.O. Mulhearn, Wear 6[6] (1963) 457-466.
  •  
  • 69. R.T. Loto and P. Babalola, Cogent Engineering 4[1] (2017) 1422229.
  •  
  • 70. A.C. Cuevas, E.B. Becerril, M.S. Martinez, and J.L. Ruiz, Metal Matrix Composites (2018.) 227-271.
  •  

This Article

  • 2022; 23(4): 511-522

    Published on Aug 31, 2022

  • 10.36410/jcpr.2022.23.4.511
  • Received on Feb 12, 2022
  • Revised on Mar 18, 2022
  • Accepted on Apr 2, 2022

Correspondence to

  • B. Varun

  • Assistant Professor, Department of Mechanical Engineering, Sri Ramakrishna Institute of Technology, Coimbatore 641 010, Tamil Nadu, India
    Tel : +91-97876 08011

  • E-mail: bvarun.me@gmail.com