Articles
  • Microstructural analysis and experimental investigation of mechanical properties of epoxy based hybrid composite reinforced with flax, sisal and luffa fibre

  • S. Sridhara,*, S. Nandhakumarb, M. Nallusamyc and R. Maguteeswarand

  • aProfessor, Department of Automobile Engineering, RVS Technical Campus, Coimbatore 641042, India
    bProfessor, Department of Mechanical Engineering, Dr.N.G.P Institute of Technology, Coimbatore 641048, India
    cAsst. Professor, Department of Mechanical Engineering, Dr.N.G.P Institute of Technology, Coimbatore 641048, India
    dProfessor, Department of Mechanical Engineering, Suguna College of Engineering, Coimbatore 641048, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. A. Athijayamania, M. Thiruchitrambalam, U. Natarajan, and B. Pazhanivel, Mater. Sci. Eng. A 517 (2009) 344-353.
  •  
  • 2. V. Calado, D.W. Barreto, and J.R.M. D’almeida, J. Mater. Sci. 19 (2000) 2151-2153.
  •  
  • 3. C. Gonzalez-Murillo, and M. P. Ansell, Mech. Compos. Mater. 45 (2009) 435-442.
  •  
  • 4. S. Jayabal and U. Natarajan, Int J Adv Manuf Technol. 10 (2010) 768-742.
  •  
  • 5. Y. Li, C. Hu, and Y. Yu, Compos. Part A Appl. Sci. 39 (2008) 570-578.
  •  
  • 6. R. Thirumalai, R. Prakash, R. Ragunath, and K.M. Senthilkumar, Mater. Res. Express 6 (2019) 1-8.
  •  
  • 7. A.N. Shah and S.C. Lakkad, J. Fiber Sci. Technol. 15 (1981) 41 46.
  •  
  • 8. D. Ray, B.K. Sarkara, A.K. Rana, and N.R. Bose, Compos Part A Appl. Sci. 32 (2001) 119-127.
  •  
  • 9. S.N Monteiro, R.J.S. Rodriquez, M.V. De Souza, and J.R.M. D'Almeida, Adv. Perform. Mater. 5[3] (1998) 183-191.
  •  
  • 10. K. Murugan, S. Venkatesh, R. Thirumalai, and S. Nandhakumar, Mater. Today: Proc. 37 (2021) 110-114.
  •  
  • 11. K.G. Satyanarayana, K. Sukumaran, A.G. Kulkarni, S.G.K Pillai, and P.K. Rohatgi, Compos. 17 (1986) 329-333
  •  
  • 12. R.Vinayagamoorthy, I. V. Manoj, G. Narendra Kumar, I. Sai Chand, GV Sai Charan Kumar and K. Suneel Kumar, J. Mech. Sci. Technol. 32[5] (2018) 2011-2020.
  •  
  • 13. KM. Senthilkumar, R. Thirumalai, M. Seenivasan, and T. Venugopal, J. Ceram. Process. Res. 22[6] (2021) 731-738.
  •  
  • 14. Y.M. Kin, J.H. Kwon, S.H. Kang, J.H. Jung, P.J. Kim, and K.J. Lim, J. ceram. process. res. 13[S2] (2012) S211-S214.
  •  
  • 15. M. Srinivasan, S. Ramesh, S. Sundaram, and R. Viswanathan, J. Ceram. Process. Res. 22[3] (2021) 345-355.
  •  
  • 16. A.I. Azmi, R.J. Lin, and D. Bhattacharyya, Int. J. Adv. Manuf. Technol. 64[1-4] (2013) 247-261.
  •  
  • 17. M. Seeman, G. Ganesan, R. Karthikeyan, and A. Velayudham, Int. J. Adv. Manuf. Technol. 48[5-8] (2010) 613-624.
  •  

This Article

  • 2022; 23(4): 498-502

    Published on Aug 31, 2022

  • 10.36410/jcpr.2022.23.4.498
  • Received on Feb 4, 2022
  • Revised on Mar 20, 2022
  • Accepted on Mar 21, 2022

Correspondence to

  • S. Sridhar

  • Professor, Department of Automobile Engineering, RVS Technical Campus, Coimbatore 641042, India
    Tel : +91 9443743350

  • E-mail: sivasridharr@gmail.com