Articles
  • Effect of cryogenic treatment on nitinol alloy reinforced with mwcnt and its effect on high temperature wear analysis

  • V. Kavithaa,*, R. Soundararajanb and V. Senthilc

  • aAssistant Professor, Mechanical Engineering, RVS College of Engineering and Technology, Coimbatore, Tamilnadu, India
    bAssociate Professor, Mechanical Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, Tamilnadu, India
    cAssociate Professor, Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore, Tamilnadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Z. Liu, X. Feng, X. Yi, K. Sun, H. Wang, Z. Gao, and X. Meng, Prog. Nat. Sci.: Mater. Int. 31 (2021) 749-754.
  •  
  • 2. X. Cai, H. Li, B. Ji, M. Li, X. Yao, Y. Wang, and D. Sun, Opt. Laser Technol. 146 (2022) 107575.
  •  
  • 3. X. Yi, H. Wang, K. Sun, W. Gao, B. Sun, G. Shen, X. Meng, Z. Gao, and W. Cai, J. Alloys Compd. 854 (2021) 157159.
  •  
  • 4. T. Fukagawa, Y. Saito, and A. Matsuyama, J. Alloys Compd. 896 (2021) 163118.
  •  
  • 5. O.O. Shichalin, I.Y. Buravlev, E.K. Papynov, A.V. Golub, A.A. Belov, A.A. Buravleva, V.N. Sakhnevich, M.I. Dvornik, N.M. Vlasova, A.V. Gerasimenko, V.P. Reva, and A.A. Yudakov, Int. J. Refractory Metals Hard Mater. 102 (2022) 105725.
  •  
  • 6. J. Pang, Y. Xu, J. Tian, Y. Zhou, D. Xue, X. Ding, and J. Sun, Mater. Sci. Eng. A 807 (2021) 140850.
  •  
  • 7. R. Pfeifer, C.W. Muller, C. Hurschler, S. Kaierle, V. Wesling, and H. Haferkamp, Procedia CIRP 5 (2013) 253-258.
  •  
  • 8. L. Reclaru, R. Lerf, P.-.Y. Eschler, and J.-.M. Meyer, Biomaterials 22 (2001) 269-279.
  •  
  • 9. D. Tarnita, D. Tarnita, and D. Bolcu, Biomed. Eng. (2011) 431-468.
  •  
  • 10. W. Wang, X. Yang, H. Li, F. Cong, and Y. Liu, Adv. Mater. Sci. Eng. 2014 (2014) 1-8.
  •  
  • 11. J. Frenzel, E.P. George, A. Dlouhy, C. Somsen, M.F.-X. Wagner, and G. Eggeler, Acta Materialia 58 (2010) 3444-3458.
  •  
  • 12. M.H. Elahinia, M. Hashemi, M. Tabesh, and S.B. Bhaduri, Prog. Mater. Sci. 57 (2012) 911-946.
  •  
  • 13. L. Jiang, X. Cui, G. Jin, H. Tian, Z. Tian, X. Zhang, and S. Wan, Appl. Surf. Sci. 575 (2022) 151645.
  •  
  • 14. K. Ohno, M. Tsuchiya, R. Kuwahara, R. Sahara, S. Bhattacharyya, and T.N. Pham, Comput. Mater. Sci. 191 (2021) 110284.
  •  
  • 15. Y.-M. Byoun, S.-K. Seo, J.-d. Yoon, and S.-J. Na, J. Ceram. Process. Res. 20 (2019) 556-562.
  •  
  • 16. B. Gwalani, S. Shukla, D. Leonard, J. D. Poplawsky, D. T. Pierce, L. Kovarik, G. Muralidharan, and A. Devaraj, J. Alloys Compd. 886 (2021) 161207.
  •  
  • 17. J. Li, K. Sun, Y. Jiang, X. Meng, and W. Cai, Mater. Lett. 293 (2021) 129732.
  •  
  • 18. P. Li, Y. Jia, J. Yi, X. Ma, J. Pu, and D. Wang, J Alloys Compd. 844 (2020) 156175.
  •  
  • 19. H. Nam and K.-W. Nam, J. Ceram. Process. Res. 22 (2021) 66-73.
  •  
  • 20. G.S. Pandolfi, S.C. Martins, V.T.L. Buono, and L.A. Santos, J. Mater. Res. Technol. 9[4] (2020) 9162-9173.
  •  
  • 21. P. Jiang, H. Huang, B. Sun, G. Song, W. Wu, Z. Wang, and Y. Zhang, Mater. Today Commun. 24 (2020) 101112.
  •  
  • 22. S. Liu, C. Xia, T. Yang, Z. Yang, N. Liu, and Q. Li, Mater. Lett. 260 (2020) 126938.
  •  
  • 23. J. Umar Mohamed, P.L. Palaniappan, P. Maran, and R. Pandiyarajan, J. Ceram. Process. Res. 22 (2021) 306-316.
  •  
  • 24. İ. Topcu, J. Ceram. Process. Res. 22 (2021) 276-282.
  •  
  • 25. G. Zhao, J. Chen, C. Ding, D. Fang, C. Huang, and X. Ye, Vacuum 177 (2020) 109381.
  •  
  • 26. D.C. Ren, H.B. Zhang, Y.J. Liu, Shujun Li, W. Jin, R. Yang, and L.C. Zhang, Mater. Sci. Eng. A 771 (2020) 138586.
  •  
  • 27. J.S. Kim, Y.J. Kim, W.C. Kim, W.T. Kim, and D.H. Kim, Intermetallics 124 (2020) 106867.
  •  

This Article

  • 2022; 23(3): 397-403

    Published on Jun 30, 2022

  • 10.36410/jcpr.2022.23.3.397
  • Received on Jan 29, 2022
  • Revised on Feb 14, 2022
  • Accepted on Apr 8, 2022

Correspondence to

  • V. Kavitha

  • Assistant Professor, Mechanical Engineering, RVS College of Engineering and Technology, Coimbatore, Tamilnadu, India
    Tel : +91 8903961416

  • E-mail: vkavithagunasekaran@gmail.com