Articles
  • Modeling and optimization of material removal rate and surface roughness for Al6010 HMMCs on WEDM using Response Surface Methodology

  • Mukesh Kumara, S.K. Tamanga,*, Dipika Devib, M. Dabia, K. K. Prasada,c and R. Thirumalaid

  • aDepartment of Mechanical Engineering, North Eastern Regional Institute of Science and Technology, Nirjuli, Arunachal Pradesh-791109, India
    bDepartment of Civil Engineering, North Eastern Regional Institute of Science and Technology, Nirjuli, Arunachal Pradesh-791109, India
    cCentre for Sensor, Instrumentation and Cyber Physical System Engineering (SeNSE), Indian Institute of Technology Delhi, New Delhi-110016, India
    dDepartment of Mechanical Engineering, Dr. N.G.P Institute of Technology, Coimbatore - 641 048, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. D. Satishkumar, M. Kanthababu, V. Vajjiravelu, R. Anburaj, N. ThirumalaiSundarrajan, and H. Arul, Int. J. Adv. Manuf. 56[9] (2011) 975-986.
  •  
  • 2. P. Shandilya, P.K. Jain, and N.K. Jain, Procedia Eng.38 (2012) 2371-2377.
  •  
  • 3. T.B. Rao and A. Gopala Krishna, Int. J. Adv. Manuf. 73[1-4] (2014): 299-314.
  •  
  • 4. S. Ramesh, N. Natarajan, K. Vijayan, and K. Sathish Kumar, Appl. Mech. Mater. 592 (2014) 456-460.
  •  
  • 5. B. NRaju, M. Raja Roy, S. Rajesh, and K. Ramji, Int. J. Eng. Trends Technol. 23[2] (2015): 82-89.
  •  
  • 6. S. Kumar, M. Uthayakumar, S. Thirumalai Kumaran, P. Parameswaran, E. Mohandas, G. Kempulraj, B.S. Ramesh Babu, and S.A. Natarajan, J. Manuf. Process. 20 (2015) 33-39.
  •  
  • 7. S. Ramesh, N. Natarajan, and V. Krishnaraj, Carbon Sci. Technol. 3 (2014) 14-21.
  •  
  • 8. A. Pramanik, Int. J. Mach. Tools Manuf. 86 (2014) 44-61.
  •  
  • 9. P.S. Rao, K. Ramji, and B. Satyanarayna, Int. J. Eng. Sci. Technol. 2[12] (2010) 7729-7739.
  •  
  • 10. S.S. Kumar, F. Erdemir, T. Varol, S.T. Kumaran, M. Uthayakumar, and A. Canakci, Int. J. Lightweight Mater. Manuf. 3 (2020) 127-135.
  •  
  • 11. A. Sinha, A. Majumder and K. Gupta, Proc IMechE Part E: J. Process Mech. Eng. (2022).
  •  
  • 12. A. Chaudhary, S. Sharma, and A. Verma, Materials Today: Proceedings. 50[5] (2022) 917-922.
  •  
  • 13. R. Karthik, R. Viswanathan, J. Balaji, N. Sivashankar, and R. Arivazhagan, IOP Conf. Ser.: Mater. Sci. Eng. 1013 (2021) 1-9.
  •  
  • 14. A. Kumar, N. Grover, A. Manna, J.S. Chohan, R. Kumar, S. Singh, C. Prakash, and C.I. Pruncu, Adv. Comp. Lett. 29 (2020) 1-14.
  •  
  • 15. R. Chaudhari, J. Vora, D.M. Parikh, V. Wankhede, and S. Khanna, J. Inst. Eng. India Ser. D. 101 (2020) 117-126.
  •  
  • 16. K.M. Senthilkumar, A. Sivakumar, R.M. Shivaji, S.K. Tamang, and M. Giriraj, J. Ceram. Process. Res. 23[2] (2022) 233-236.
  •  
  • 17. M. Kannaiyan, J. G.T Raghuvaran, K. Govindan, and E. P. Annamalai, J. Ceram. Process. Res. 21[1] (2020) 26-34.
  •  
  • 18. T. Tamilanban, T. S. Ravikumar, C. Gopinath, and S. Senthilrajan, J. Ceram. Process. Res. 22[6] (2021) 629-635.
  •  
  • 19. R. Srinivasan, B. S. Babu, P. Prathap, R. Whenish, R. Soundararajan, and G. Chandramohan, J. Ceram. Process. Res. 22[1] (2021) 16-24.
  •  
  • 20. T. Pridhar, K. Ravikumar, B. Sureshbabu, R. Srinivasan, and B. Sathishkumar, J. Ceram. Process. Res. 21[2] (2020) 131-142.
  •  

This Article

  • 2022; 23(3): 373-382

    Published on Jun 30, 2022

  • 10.36410/jcpr.2022.23.3.373
  • Received on Feb 1, 2022
  • Revised on Mar 7, 2022
  • Accepted on Mar 15, 2022

Correspondence to

  • S.K. Tamang

  • Department of Mechanical Engineering, North Eastern Regional Institute of Science and Technology, Nirjuli, Arunachal Pradesh-791109, India
    Tel : +919402953139 Fax: +91 (0)360 2257872

  • E-mail: sktnerist@gmail.com