Articles
  • Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel

  • Seenivasan Murugesana,*, Venugopal Thangamuthua, Rohokale Milind Shivajib and Suresh Kumar Rc

  • aProfessor, Mechanical Engineering, KGISL Institute of Technology, Coimbatore, India
    bProfessor, Mechanical Engineering, SKN Sinhgad Institute of Technology & Science, Lonavala, India.
    cProfessor, Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. J.A. George, and K. Lokesha, SN Appl. Sci. 1[9] (2019) 1-9.
  •  
  • 2. S. Kumar, D. Singh, and N. S. Kalsi, J. Inst. Eng. India Ser. C. 100 [1] (2019) 121-128.
  •  
  • 3. S. Neşeli, S. Yaldız, and E. Türkeş, Measurement. 44[3] (2011) 580-587
  •  
  • 4. L.N. Abdulkadir, K. Abou-El-Hossein, and M.M. Liman. Int J Nanomanuf. 17[1] (2021) 47-75.
  •  
  • 5. I. Asiltürk, and S. Neşeli, Measurement. 45 [4] (2012) 785-794.
  •  
  • 6. H.M. Somashekara, and N. Lakshmana Swamy, Int. J. Eng. Sci. Technol. 4[5] (2012) 1967-1973.
  •  
  • 7. M. Nalbant, H. Gökkaya, and G. Sur, Mater. Des. 28[4] (2007) 1379-1385.
  •  
  • 8. R. Thirumalai, and J. S. Senthilkumaar. J. Mech. Sci. Technol. 27[4] (2013) 1109-1116.
  •  
  • 9. S. Ramesh, L. Karunamoorthy, and K. Palanikumar. Mater Manuf Process. 23[2] (2008) 174-181.2008.
  •  
  • 10. W.H. Yang, and Y.S. Tarng, J. Mater. Process. Technol. 84 [1] (1998) 122-129.
  •  
  • 11. R. Saravanan, P. Asokan, and K. Vijayakumar, Int. J. Adv. Manuf. Technol. 21 (2003) 1-9.
  •  
  • 12. O. Keblouti, L. Boulanouar, M. Azizi, and M. Athmane, Int. J. Ind. Eng. Comput. 8[1] (2017) 71-84.
  •  
  • 13. A. Cakan, and F. Evrendilek, Mechanics. (2017) 23 [5] 756-761
  •  
  • 14. M. Stipkovic Filho, M.A. Stipkovic, E.C. Bordinassi, S. Delijaicov, and S.L.R. de Almeida, Improve Perf of Mater (2018) 83-91.
  •  
  • 15. C. E. Ventura, H.S. Chaves, J.C.C Rubio, A.M. Abrao, B. Denkena, and B. Breidenstein, Int. J. Adv. Manuf. Technol. 90[9-12] (2017) 2557-2565.
  •  
  • 16. A. Rami, A. Kallel, S. Sghaier, S. Youssef, and H. Hamdi, Int. J. Adv. Manuf. Technol. 91[9] (2017) 3833-3850.
  •  
  • 17. N.R. Dhar, M.T. Ahmed, and S. Islam. Int. J. Mach. Tools Manuf. 47[5] (2007) 748-753.
  •  
  • 18. D. Mukhopadhyay, S. Banerjee, and N.S.K. Reddy, J. Manuf. Sci. Eng. 129[3] (2007) 520-526.
  •  
  • 19. K.V. Rao, B.S.N. Murthy, and N.M. Rao, Meas. 46[10] (2013) 4075-4084.
  •  
  • 20. G. Samtaş, Int. J. Adv. Manuf. Technol. 73[1-4] (2014) 353-364.
  •  
  • 21. R. Thirumalai, and T. Ganesan, J. Balk. Tribol. 23 (2017) 583-591.
  •  
  • 22. M.S. Sharma, M. Chandrasekaran, and R. Thirumalai, Manufacturing Technology Today. 13[6] (2014) 20-29.
  •  
  • 23. M. Srinivasan, S. Ramesh, S. Sundaram and R. Viswanathan, J. ceram. process. res. 22[3] (2021) 345-355.
  •  
  • 24. T. Tamilanban, T.S. Ravikumar, C. Gopinath and S. Senthilrajan, J. ceram. process. res. 22[6] (2021) 629-635.
  •  

This Article

  • 2022; 23(3): 367-372

    Published on Jun 30, 2022

  • 10.36410/jcpr.2022.23.3.367
  • Received on Jan 25, 2022
  • Revised on Mar 10, 2022
  • Accepted on Mar 22, 2022

Correspondence to

  • Seenivasan Murugesan

  • Professor, Mechanical Engineering, KGISL Institute of Technology, Coimbatore, India
    Tel : +91 98422 39522

  • E-mail: drmseenivasan@gmail.com