Articles
  • Mechanical properties of geopolymers after immersion

  • Yootaek Kim* and Hakmin Kim

  • Materials Engineering Department, Kyonggi University, Suwon, Republic of Korea

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. K.P. Lee, S.S. Lee, and H.Y. Song, J. Kor. Arch. Inst. 27[11] (2011) 111-118.
  •  
  • 2. L. Vickers, W.D.A. Rickard, and A. van Riessen, Thermochim. Acta. 580[20] (2014) 20-27.
  •  
  • 3. J. Sim, C. Park, S.J. Park, and Y.J. Kim, J. Korean Soc. Civ. Eng. A. 26[1A] (2006) 213-218.
  •  
  • 4. L. Duan, S. Sun, L. Yue, W. Qu, and Y. Yang, Energy 87 (2015) 490-503.
  •  
  • 5. Y. Kim and M. Kim, J. Ceram. Process. Res. 22[1] (2021) 39-47.
  •  
  • 6. D. Kioupis, C. Kavakakis, S. Tsivilis, and G. Kakali, Adv. Mat. Sci. Eng. 2018 (2018) 1-11.
  •  
  • 7. M. Szechyn´ska-Hebda, J. Marczyk, C. Ziejewska, N. Hordyn´ska, J. Mikuła, and M. Hebda, Materials 12 (2019) 2999-3015.
  •  
  • 8. J. Davidovits, J. Thermal Analysis 37[8] (1991) 1633-1656.
  •  
  • 9. F.G.M. Aredes, T.M.B. Campos, J.P.B. Machado, K.K. Sakane, G.P. Thim, and D.D. Brunelli, Ceram. Int. 41[6] (2015) 7302-7311.
  •  
  • 10. J.G.S. van Jaarsveld and J.S.J. van Deventer, Ind. Eng. Chem. Res. 38[10] (1999) 3932-3941.
  •  
  • 11. A. Autef, E. Joussein, G. Gasgnier, and S. Rossignol, J. Non-Cryst. Solids 358[21] (2012) 2886-2893.
  •  
  • 12. Y. Kim and M. Kim, Int’l J. Mech. Production Eng. 8[5] (2020) 47-51.
  •  
  • 13. Y. Kim, S. Kim, and C. Jang, J. Ceram. Process. Res. 17[11] (2016) 1202-1207.
  •  
  • 14. M. Szechyn´ska-Hebda, J. Marczyk, C. Ziejewska, N. Hordyn´ska, J. Mikuła, and M. Hebda, Materials 12 (2019) 2999-3015.
  •  
  • 15. S. Kim and Y. Kim, J. Ceram. Process. Res. 18[1] (2017) 59-63.
  •  

This Article

  • 2022; 23(2): 126-131

    Published on Apr 30, 2022

  • 10.36410/jcpr.2022.23.2.126
  • Received on Apr 29, 2021
  • Revised on Aug 23, 2021
  • Accepted on Aug 28, 2021

Correspondence to

  • Yootaek Kim

  • Materials Engineering Department, Kyonggi University, Suwon, Republic of Korea
    Tel : +82-31-249-9765 Fax: +82-31-249-9774

  • E-mail: ytkim@kgu.ac.kr, gkrals9496@naver.com