Articles
  • Designing a centrifugal atomization machine with trial manufacturing Sn powder through various rotation

  • Dwita Suastiyantia,*, Hari Pratomob and Abdurahman Hanafi Hamdanic

  • aDepartment of Mechanical Engineering, Institut Teknologi Indonesia, Puspiptek Raya Street, Tangerang Selatan, 15314 Indonesia
    bPhysics Research Centre, Lembaga Ilmu Pengetahuan Indonesia, Puspiptek Raya Street, Tangerang Selatan, Indonesia, 15314, Indonesia
    cDepartment of Mechanical Engineering, Institut Teknologi Indonesia, Puspiptek Raya Street, Tangerang Selatan, 15314 Indonesia

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. C.D. Zou, Y. Gao, B. Yang, and Q. Zhai, Trans. Nonferrous Met. Soc. Chin. 20[2] (2010) 248-253.
  •  
  • 2. L. Huiping, P. Sakiropulos, and T. Jhonson, K. Eng. Mater. 189-191[1] (2001) 245-251.
  •  
  • 3. İ. Topcu, J. Ceram. Proc. Res. 22[2] (2021) 143-148
  •  
  • 4. M.S. Kim, J. Ceram. Proc. Res. 21[1] (2020) 119-122
  •  
  • 5. A. Basyir, D. Aryanto, and A.S. Wismogroho, in Proceedings of the Seminar Nasional Fisika (E-Journal) SNF2020, June 2020, edited by M. Delina (Universitas Negeri Jakarta, 2020) p.21-28.
  •  
  • 6. P. Sungkhaphaitoon, T. Plookphol, and S. Wisutmethangoon, Int. J. Appl. Phys. Math. 2[1] (2012) 77-82.
  •  
  • 7. F.S. Biancaniello, R.D. Jiggetts, and R.E. Ricker, in Pro- ceedings of the TMS Annual Meeting and Symposium, March 2000, edited by E.K. Ohriner (TMS, 2000) p. 263-274.
  •  
  • 8. Y. Miyasaka, Jpn. Soc. Mech. Eng. 17[1] (1974) 1461-1468.
  •  
  • 9. F. Hidayanti, T. Yulianto, and A.S. Wismogroho, J. Sains. Teknol. 8[2] (2016) 113-127.
  •  
  • 10. W. Dong, Y. Meng, F. Xu, Y. Han, Y. Wang, X. Wang, Y. Zhao, Powd. Metal. Met. Ceram. 59[5-6] (2020) 239-248.
  •  
  • 11. L.P. Zhang and Y.Y. Zhao, Elsevier 318[1] 2017 62-67.
  •  
  • 12. Y.Y. Zhao, Elsevier 27[1] (2005) 745-750
  •  
  • 13. O.A. Shemyakina, Z.I. Sheikhalieva, and S.M. Sheikhaliev, Rus. J. Non-Ferrous Met. 51[3] (2010) 250-254.
  •  
  • 14. J. Setiawan and Sungkono, Powd. Metal. Met. Ceram. 59[1] (2017) 5-6.
  •  
  • 15. P. Gopi Krishnana, B. Suresh Babub, and K. Sivac, J. Ceram. Proc. Res. 21[2] (2020) 157-163
  •  
  • 16. J.U. Hura, J.H. Kimb, G.S. Ana, S.C. Choia, J. Ceram. Proc. Res. 21[2] (2020) 213-216
  •  
  • 17. A.H. Oh, H.S.Lee, B.G.Kim, S.C. Choi, Y.G. Jung, G.S. An, J. Ceram. Proc. Res. 21[4] (2020) 400-406
  •  
  • 18. Solder Paste Task Group, in J-STD-005 Requirements for Soldering Pastes (Electronic Industries Alliance (EIA) and IPC (1995) 1.
  •  
  • 19. V. Nevruzoglu, M. Manir, G. Ozturk, J. Ceram. Proc. Res. 21[2] (2020) 256-262
  •  
  • 20. Y. Liu, J. Song, L. Chen, H. Luo, G. Lin, P. Chen, C. Wei, J. Liu, J. Ceram. Proc. Res. 21[4] (2020) 488-494
  •  
  • 21. D. Suastiyanti, Y.N. Maulida, J. Ceram. Proc. Res. 22[1] (2021) 61-65
  •  
  • 22. M. Sheikhaliev, Z.I. Sheikhalieva, and J.J. Dunkley, Metal Powder Report 63[2] (2008) 28-30.
  •  

This Article

  • 2021; 22(6): 705-713

    Published on Dec 31, 2021

  • 10.36410/jcpr.2021.22.6.705
  • Received on Aug 4, 2021
  • Revised on Oct 8, 2021
  • Accepted on Oct 9, 2021

Correspondence to

  • Dwita Suastiyanti

  • Department of Mechanical Engineering, Institut Teknologi Indonesia, Puspiptek Raya Street, Tangerang Selatan, 15314 Indonesia
    Tel : +62-85697163727 Fax: +62-7561091

  • E-mail: dwita_suastiyanti@iti.ac.id