Articles
  • Tungsten oxide film synthesis by spray pyrolysis of peroxotungstic acid and its electrochromic characterization
  • Chang-Yeoul Kima,*, Seong-Geun Choa,b,c, Seok Parka,b,d and Duck-Kyun Choib
  • a NanoIT Center, Korea Institute of Ceramic Engineering and Technology, 153-801 Seoul, Korea b Department of Material Science and Engineering, Hanyang University, 133-701 Seoul, Korea c Mechantonics and Manufacturing Technology Center, Samsung Electronics Company, 416 Maetan-dong Yuongtong-gu Suwonsi, Kyunggi-do, Korea d MI Team Hynix Com., 136-1 Amiri Bubal-Up Icheon-Si, Kyunggi-do, Korea
Abstract
Peroxotungstic acid precursor solution was sprayed on indium-doped tin oxide (ITO) glass substrates to synthesize amorphous and crystalline phase tungsten oxide thin films by changing heating temperature. We could synthesize the amorphous phase at below 400 oC and the monoclinic crystalline tungsten oxide at above 400 oC. Electrochemical and in-situ optical transmittance analysis showed that amorphous phase tungsten oxide at 250 oC had a good electrochromic property with a large optical transmittance change between its bleached and colored states. The coloration mechanisms are due to polaron generation by inserting ions and electrons to change W+6 state to W+5 or W+4 state.

Keywords: Peroxotungstic acid, Electrochemical, Electrochromic, Spray pyrolysis, Tungsten oxide

This Article

  • 2009; 10(6): 851-854

    Published on Dec 31, 2009

Correspondence to

  • E-mail: