Articles
  • Taguchi analysis in investigation of feed force, cutting force and thrust force while machining aluminium metal matrix composite

  • R. Santhanakrishnana,*, V.S. Thangarasub, R. Arravindc and V. Ramachandirand

  • aDepartment of Mechanical Engineering, CMR University, Bengaluru, India
    bDepartment of Mechanical Engineering, Indra Ganesan College of Engineering, Trichy, India
    cDepartment of Aeronautical Engineering, Paavai Engineering College, Namakkal, India
    dDepartment of Aeronautical Engineering, Hindusthan College of Engineering and Technology, Coimbatore, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Metal matrix composite finds several applications in automotive and aerospace sectors because of its excellent mechanical properties and ease of machinability characteristics Taguchi analysis is used to investigate the cutting force, feed force and the thrust force while machining aluminium metal matrix composite. The analysis of variance (ANOVA) is used to investigate the experimental results and the parameters influencing the cutting force, feed force and thrust force in turning of aluminium metal matrix composite. Taguchi analysis is used and the response table for the feed force, cutting force and Thrust force is calculated and it is found the forces are highly influence by the steam pressure


Keywords: Feed force, Cutting force, Thrust force, Metal matrix composite, ANOVA, Taguchi technique

This Article

  • 2023; 24(1): 174-181

    Published on Feb 28, 2023

  • 10.36410/jcpr.2023.24.1.174
  • Received on Sep 9, 2022
  • Revised on Oct 3, 2022
  • Accepted on Nov 19, 2022

Correspondence to

  • R. Santhanakrishnan

  • Department of Mechanical Engineering, CMR University, Bengaluru, India
    Tel : +91 9944186041

  • E-mail: sanskrish@gmail.com