Articles
  • Machining parameter investigation of Ti-6Al-4V alloy on milling process with Al2O3 Nano hybrid cutting fluid

  • C. Manivela,*, P. Sivab, S.M. Vijayarajanc, and M. Ameena Banud

  • aAssistant Professor, Department of Mechanical Engineering, NPR College of Engineering & Technology, Natham, Dindigul, Tamilnadu, India - 624401
    bAssistant Professor, Department of Mechanical Engineering, JCT College of Engineering and Technology, Pichanur, Coimbatore, Tamilnadu, India - 641105
    cAssociate Professor, Department of Electronics & Communication Engineering, NPR College of Engineering & Technology, Natham, Dindigul, Tamilnadu, India - 624401
    dProfessor, Department of Electronics & Communication Engineering, NPR College of Engineering & Technology, Natham, Dindigul, Tamilnadu, India - 624401

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. R. Banerjee, S. Nag, and H.L. Fraser, Mater. Sci. and Eng:C 25[3] (2005) 282-289.
  •  
  • 2. C.R. Dandekar, Y.C. Shin, and J. Barnes, Int. J. Mach. Tool. Manu. 50[2] (2010) 174-182.
  •  
  • 3. A. Bhattacharyya in “Metal Cutting: Theory and Practice” (New Central Book Agency (P) Ltd, Calcutta, 1984) p.21-32.
  •  
  • 4. C.H. Che-Haron and A. Jawaid, J. Mater. Process. Technol. 166[2] (2005) 188-192.
  •  
  • 5. C. Chanakyan and S. Sivakumar, J. Ceram. Process. Res. 21[6] (2020) 647-655.
  •  
  • 6. A. Shokrani, V. Dhokia, and S. T. Newman, J. Manuf. Process. 21 (2016) 172-179.
  •  
  • 7. K. Aslantas and A. Cicek, in proceeding of the 8th CIRP Conference on High Performance Cutting, 2018, edited by László Monostori, Gabor Stepan and Dániel Bachrathy, (Procedia CIRP 2018) 77 (2018) p.70-73.
  •  
  • 8. G.K.M. Rao, R. Padmini, and P.V. Krishna, Tribology International 94[1] (2016) 490-501.
  •  
  • 9. H. Hegab, U. Umer, M. Soliman, and H.A. Kishawy, Int. J. Adv. Manuf. Technol. 96[1-10] (2018) 3449-3458.
  •  
  • 10. P. Mutharasu and M. Kathiresan, J. Ceram. Process. Res. 22[6] (2021) 697-704.
  •  
  • 11. R.S. Revuru, J.Z. Zhang, N.R. Posinasetti, and T. Kidd, Int. J. Adv. Manuf. Technol. 95[1-4] (2018) 1451-1463.
  •  
  • 12. M. Srinivasan, S. Ramesh, S. Sundaram, and R. Viswanathan, J. Ceram. Process. Res. 22[3] (2021) 345-355.
  •  
  • 13. A.K. Sharma, A.K. Tiwari, and A.R. Dixit, J. Cleaner Prod. 127 (2016) 1-18.
  •  
  • 14. H. Hegab, H.A. Kishaway, M.H. Gadallah, U. Umer. and I. Deiab, Int. J. Adv. Manuf. Technol. 97[5-8] (2018) 1593-1603.
  •  
  • 15. K.M.S. Kumar, T. Ramanathan, S. Murugasan. and V. Thangamuthu, J. Ceram. Process. Res. 22[6] (2021) 731-738
  •  
  • 16. M. Usha and G.S. Rao, Tribol. Ind. 44[1] (2022) 1-15.
  •  
  • 17. S.H. Ahn and K.W. Nam, J. Ceram. Process. Res. 18[11] (2017) 767-776.
  •  
  • 18. S. Khandekar, M. Ravishankar, V. Agnihotri, and J. Ramkumar, Mater. Manuf. Process 27 (2012) 1-5.
  •  
  • 19. T. Siva and K. Anandavelu, J. Ceram. Process. Res. 24[2] (2023) 406-414.
  •  
  • 20. P. Bagyalakshmi, P.A. Varthanan, and P.D. Randheer, J. Ceram. Process. Res. 23[3] (2022) 356-366.
  •  
  • 21. E. Abdelkrem, N. Ibrahim, and D. Ibrahim, J. Manuf. Mater. Process. 5 (2021) 42.
  •  
  • 22. I. Sharmain, M.A. Gafur, and N.R. Dhar, SN Applied Sciences, Springer Nature [2] (2020) 626.
  •  
  • 23. B.S. Babu, G. Chandramohan, C. Boopathi, T. Prithar, and R. Srinivasan, J. Cerm. Process. Res. 19[1] (2018) 69-74.
  •  
  • 24. I.A. Choudhury and M.E. Baradie, J. Mater. Process Tech. 95[1] (1999) 30-39.
  •  
  • 25. M. Changmai, J.P. Priyesh, and M.K. Purkait, J. Sci.: Adv. Mater. Devices 2[4] (2017) 483-492.
  •  
  • 26. B. Rahmatinejad, J. Nanostruct. 12[3] (2022) 642-659.
  •  
  • 27. F. Gugan, T. Kivak, C.V. Yildirim, and M. Sarikaya, J. Mater. Res. Technol. 9[5] (2020) 10386-10400.
  •  
  • 28. R. Kumar, A.K. Sahoo, P.C. Mishra, and R.K. Das, Int. J. adv. Manuf. Technol. Online publication, 2019.
  •  
  • 29. C. Manivel and L. Savadamuthu, Digest J. Nanomater. Biostruct. 15[3] (2020) 809-814.
  •  
  • 30. K.K. Gajrani, P.S. Suvin, S.V. Kailas, and M.R. Sankar, J. Mater. Process. Technol. 266 (2019) 125-139.
  •  
  • 31. D.G. Subhedar, Y.S. Patel, B.M. Ramani, and G.S. Patange, Clean. Eng. Technol. 3 (2021) 100104.
  •  
  • 32. A. Mamedov and I. Lazoglu, J. Mater. Process. Technol. 229 (2016) 659-667.
  •  
  • 33. Douglas C.Montgomery in “Design and Analysis of Experiments” 6th Edition (John Wiley & sons, New York, 2005) p.757.
  •  
  • 34. N.K. Sahu and A.B. Andhare, J. Comput. Des. Eng. 6[1] (2019) 1-12.
  •  
  • 35. W. Gary and Oehlert in “A first course in design and Analysis of Experiments”, (W.H. Freeman, 2000) p.679.
  •  
  • 36. B. Gep and D.W. Behnken, Technometrics 2 (1960) 455-475.
  •  
  • 37. H. Oktem, T. Erzurumulu, and H. Kurtaran, J. Mater. Process. Technol. 170 (2005) 11-16.
  •  
  • 38. D. Yang and Z. Liu, Int. J. Refract. Met. Hard Mater. 51 (2015) 192-200.
  •  
  • 39. K.M.S. Kumar, T. Ramanathan, S. Murugasan, and V. Thangamuthu, J. Ceram. Process. Res. 22[6] (2021) 731-738.
  •  
  • 40. A.K. Parida and K. Maity, Measurement 137 (2019) 375-381.
  •  
  • 41. Coello Carlos A. Coello and Gary B. Lamont in “Applications of multi-objective evolutionary algorithms” (Published by World Scientific 2004, V1) p.29.
  •  
  • 42. L. Senthilkumar, L. Savadamuthu, and C. Manivel, J. Ceram. Process. Res 23[4] (2022) 476-489.
  •  

This Article

  • 2024; 25(4): 529-542

    Published on Aug 31, 2024

  • 10.36410/jcpr.2024.25.4.529
  • Received on Feb 13, 2024
  • Revised on Mar 19, 2024
  • Accepted on Mar 19, 2024

Correspondence to

  • C. Manivel

  • Assistant Professor, Department of Mechanical Engineering, NPR College of Engineering & Technology, Natham, Dindigul, Tamilnadu, India - 624401
    Tel : +91-98420 59997

  • E-mail: manivelcc@gmail.com