Articles
  • Experimental investigation in the selection of blank material during deep drawing process using finite element analysis

  • Sangeetha Na,*, Brathikan V Mb, Nitheeshwar R Kc and Jayabalu Sc

  • aSenior Associate Professor, Kumaraguru College of Technology, Coimbatore, India, 641049
    bAssistant Professor, Kumaraguru College of Technology, Coimbatore, India, 641049
    cStudent, Kumaraguru College of Technology, Coimbatore, India, 641049

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. S. Thiruvarudchelvan and M.J. Tan., J. Mater. Process. Technol. 192 (2007) 8-12.
  •  
  • 2. R.V. Reddy, T.A.J. Reddy, and G.C.M. Reddy, Int. J. Eng. Trends Technol. 3[5] (2012) 669-676.
  •  
  • 3. R. Sajja and S. R. Chalamalasetti, Int. J. Adv. Appl. Math. and Mech, 1[3] (2014) 109-120.
  •  
  • 4. H. Hoffman Met. Form. Handbook. Springer Science & Business Media. (1998).
  •  
  • 5. H. Naceur, Y.Q. Guo, J. L. Batoz, and C. Knopf-Lenoir, Int. J. Mech. Sci. 43[10] (2001) 2407-2434.
  •  
  • 6. R.H. Wagoner and J.L. Chenot, Wagoner. Metal forming analysis, Cambridge University Press (2001).
  •  
  • 7. G.E. Dieter and D. Bacon, Mechanical metallurgy [3] (1976).
  •  
  • 8. H.A. Ameen, IRAQI J. Mech. Mater. Eng. 20[1] (2020) 12-24.
  •  
  • 9. C.P. Singh and G. Agnihotri, Mater. Today: Proc. 4[2] (2017) 2411-2418.
  •  
  • 10. H. Gharib, A.S. Wifi, M. Younan, and A. Nassef, J. Achiev. Mater. Manuf. Eng. 17[1-2] (2006) 245-248.
  •  
  • 11. A. Aminzadeh, S.S. Karganroudi, and N. Barka, Int. J. Adv. Manu. Tech., 117[3] (2021) 1193-120.
  •  
  • 12. S.H. Ahn and K.W. Nam, J. Ceram. Process. Res. 18[11] (2017) 767-776.
  •  
  • 13. S.H. Ahn and K.W. Nam, J. Ceram. Process. Res. 17[10] (2016) 1046-1051.
  •  
  • 14. T.Boyraz and A. Akkuş, J. Ceram. Process. Res. 22[2] (2021) 226-231.
  •  
  • 15. S.H. Ahn and K.W. Nam, J. Ceram. Process. Res. 22[1] (2021) 54-60.
  •  
  • 16. A. Akkus and T. Boyraz, J. Ceram. Process. Res. 19[3] (2018) 249-52.
  •  
  • 17. J. Chen, M. Gong, and S.H. Wu, J. Ceram. Process. Res. 16[2] (2015) 244-248.
  •  
  • 18. R. Thirumalai, J.S. Senthilkumaar, P. Selvarani, and S. Ramesh, Proc Inst Mech Eng C J Mech Eng Sci. 227[9] (2013) 1889-1897.
  •  
  • 19. R. Thirumalai and J.S. Senthilkumaar, J. Mech. Sci. Technol. 27[4] (2013) 1109-1116.
  •  
  • 20. R. Thirumalai, M Vivekraj, J. Ceram. Process. Res. 23[2] (2022) 228-232.
  •  
  • 21. R. Thirumalai, S. Karthick, M. Giriraj, J. Ceram. Process. Res. 23[2] (2022) 221-227.
  •  
  • 22. Mukeshkumar, S.K. Tamang, Dipika Devi, M. Dabi, K.K. Prasad, and R. Thirumalai, J. Ceram. Process. Res. 23[2] (2022) 373-382.
  •  
  • 23. M. Sivaperumal, R. Thirumalai, S. Kannan and K.S.S. Rao Yarrapragada, J. Ceram. Process. Res. 23[2] (2022) 404-408.
  •  

This Article

  • 2022; 23(4): 529-534

    Published on Aug 31, 2022

  • 10.36410/jcpr.2022.23.4.529
  • Received on Feb 25, 2022
  • Revised on Jun 19, 2022
  • Accepted on Jun 25, 2022

Correspondence to

  • Sangeetha N

  • Senior Associate Professor, Kumaraguru College of Technology, Coimbatore, India, 641049
    Tel : +91 9443779513

  • E-mail: Sangeetha.n.mec.@kct.ac.in