Articles
  • Parametric optimization of wear parameters on wear rate and coefficient of friction for hybrid (A356 +TiB2+ ZrO2) metal matrix composites

  • Kanakaraj Aa,*, Mohan Rb and Viswanathan Rc

  • a Department of Mechanical Engineering, Thiagarajar Polytechnic College, Salem, India
    bDepartment of Mechanical Engineering, Sona College of Technology, Salem, India
    cDepartment of Mechanical Engineering, AVS Engineering College, Salem, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. A. Kheder, G. Marahleh and D. Al-Jamea, J. Mech. Indus. Eng. 5 (2011) 533-541.
  •  
  • 2. A. Mahazery, H. Abdizadeh and H. Baharvandi, Mater. Sci. Eng. 518 (2009) 61-64.
  •  
  • 3. B.M. Viswanatha, M. Prasanna Kumar, S. Basavarajappa and T.S. Kiran, J. Eng. Sci. Tech. 8 (2013) 754-763.
  •  
  • 4. S.A. Sajjadi, M.T. Parizi, H. REzatpour and A. Sedghi, J. Alloys. Compd. 511(2012) 226-231.
  •  
  • 5. M. Maurya, S. Kumar, and V. Bajpai, J. Rein. Plas. Comp. 38 (2019) 267-298.
  •  
  • 6. C.C. Nwobi-Okoye and B.Q. Ochieze, Def. Technol. 14 (2018) 336-345.
  •  
  • 7. D. Dhaneswara, A. ZulfiaSyahrial, and M.T. Ayman, Proce. Eng. 216 (2017) 43-50.
  •  
  • 8. T. Sathish and S. Karthick, J. Mater. Res. Technol. 9 (2020) 3481-3487
  •  
  • 9. T. Satyanarayana, P.S. Rao, and M.G. Krishna, Heliyon 5 (2019) e01770.
  •  
  • 10. M.K. Akbari, H.R. Baharvandi, and K. Shirvanimoghaddam, Mater. Des. 66 (2015) 150-161.
  •  
  • 11. M. Emamy, M. Mahta and J. Rasizadeh, Comp. Sci. Technol. 66 (2006) 1063-1066.
  •  
  • 12. H. Abdizadeha, H.R. Baharvandi, and K.S. Moghaddam, Mater. Sci. Eng. 498 (2008) 53-58.
  •  
  • 13. G. Kumar, S. Seetharaman, and M. Gupta, Mater. Charact. 94 (2014) 178-188.
  •  
  • 14. K.B. Girisha and H.C. Chittappa, I.J. Innov. Res. Sci. Eng. Tech. 2 (2013) 3627-3637.
  •  
  • 15. S.B. Boppana, S. Dayanand, M.R.A. Kumar, V. Kumar, and T. Aravinda, J. Mater. Res. Tech. 9 (2020) 7354-7362.
  •  
  • 16. N. Sivashankar, R. Viswanathan, K. Periasamy, R. Venkatesh, S. Chandrakumar 37 (2021) 214-219.
  •  
  • 17. S. Ramesh, R. Viswanathan, and S. Ambika, Measurement 78 (2015) 63-72.
  •  
  • 18. A. Kannan, R. Mohan, R. Viswanathan, and N. Sivashankar, J. Mat. Res. Tech. 9 (2020) 16529-16540.
  •  
  • 19. R. Viswanathan, S. Ramesh, S. Maniraj and V. Subburam, Measurement 159 (2020) 107800.
  •  
  • 20. R. Viswanathan, S. Ramesh and V. Subburam, Measurement 120 (2018) 107-113.
  •  
  • 21. M. Hajizamani and H. Baharvandi, Adv. Mater. Phys. Chem. 1 (2011) 26-30.
  •  
  • 22. G. Naguib and Yakoub, Int. J. Sci. Technol. Res. 9 (2020) 417-421.
  •  
  • 23. K.K. Ekka and S.R Chauhan Varun, Arab. J. Sci. Eng. 40 (2015) 571-581.
  •  
  • 24. S. Venkatesan and M. Anthony Xavior, Mater. Res. Exp. 6 (2019) 1-16,
  •  
  • 25. S. Ghosh, P. Sahoo and G. Sutradhar, J. Min. Mater. Charac. Eng. 11 (2012) 1085-1094.
  •  
  • 26. T.S. Kiran, M.P. Kumar, S. Basavarajappa, and B.M. Viswanatha, Mater. Design 63 (2014) 294-304.
  •  
  • 27. R. Ramanujam, N. Muthukrishnan, and R. Raju, Int. J. Prec. Eng. Manuf. 12 (2011) 651-656.
  •  
  • 28. M.T. Azhagan and B. Mohan, J. Ceram. Process. Res. 22[4] (2021) 470-474.
  •  
  • 29. T. Tamilanban, T.S. Ravikumar, C. Gopinath and S. Senthilrajan, J. Ceram. Process. Res. 22[6] (2021) 629-635.
  •  
  • 30. P. Muthurasu and M. Kathiresan, J. Ceram. Process. Res. 22[6] (2021) 697-704.
  •  
  • 31. X. Li, M. Murashima and N. Umehara, J. Tribol. 16 (2018) 15-29.
  •  
  • 32. S. Patil, D.P Patil, A.P. Shrotri and V. Patil, Int. J. Mech. Eng. Tribol. 5 (2014) 120-129.
  •  
  • 33. T. Pridhar, K. Ravikumar, B. Sureshbabu, R. Srinivasan, and B. Sathishkumar, J. Ceram. Process. Res. 21[2] (2020) 131-142.
  •  
  • 34. C. Chanakyan and S. Sivasankar, J. Ceram. Process. Res. 21[6] (2020) 647-655.
  •  
  • 35. Y.C. Lin, J.C. Hung, H.M. Chow, and A.C. Wang, J. Ceram. Process. Res. 16[2] (2015) 249-257.
  •  
  • 36. M. Srinivasana, S. Ramesh, S. Sundaram and R. Viswanathan, J. Ceram. Process. Res. 22[3] (2021) 345-355.
  •  
  • 37. J. Umar Mohamed, PL. K. Palaniappan, P. Maran and R. Pandiyarajan, J. Ceram. Process. Res. 22[3] (2021) 306-316.
  •  
  • 38. S. Kumar, M. Chakraborty, V.S. Sarma and B.S. Murty, Wear 265 (2008) 134-142.
  •  
  • 39. S. Natarajan, R. Narayanasamy, S.P.K Babu, G. Dinesh, B.A. Kumar and K. Sivaprasad. Mater. Des. 30 (2009) 2521-2531.
  •  
  • 40. B. Yu and L. Qian, Chinese J. Mech. Eng. (2021) 34-32.
  •  
  • 41. D. Dietzel, C. Ritter, T. Monninghoff, H. Fuchs, A. Schirmeisen, and U.D. Schwarz, Phy. Rev. Lett. 101 (2008) 125505.
  •  

This Article

  • 2022; 23(3): 268-277

    Published on Jun 30, 2022

  • 10.36410/jcpr.2022.23.3.268
  • Received on Oct 2, 2021
  • Revised on Jan 14, 2022
  • Accepted on Jan 25, 2022

Correspondence to

  • Kanakaraj A

  • Department of Mechanical Engineering, Thiagarajar Polytechnic College, Salem, India
    Tel : +91 9789660646

  • E-mail: kanakaraj.tptc@gmail.com