Articles
  • Microstructural evolution and mechanical properties of TiC-Mo2C-WC-Ni multi-component powder by high energy ball milling

  • Jeong-Han Leea,b and Hyun-Kuk Parka,*

  • aKorea Institute of Industrial Technology (KITECH), Smart Mobility Materials and Components R&D Group, 6, Cheomdan-gwagiro 208-gil, Buk-gu, Gwang-Ju, 61012, Korea
    bChonnam National University, Materials Science & Engineering, 77, Yong-bongro, Buk-gu, Gwang-ju, 61186, Korea

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. A. Jam, L. Nikzad, and M. Razavi Ceram. Int. 43[2] (2017) 2448-2455.
  •  
  • 2. Y. Yanaba, T. Takahashi, and K. Hayashi J. Jpn. Soc. Powder Metallur. 51[5] (2004) 374-384.
  •  
  • 3. J. Jung and S. Kang, Acta Mater. 52[6] (2004) 1379-1386.
  •  
  • 4. A. Rajabi, M. J. Ghazali, and A. R. Daud, Mater. Des. 67 (2015) 95-106.
  •  
  • 5. S. Lemboub, S. Boudebane, F.J. Gotor, S. Haouli, S. Mezrag, S. Bouhedja, G. Hesser, H. Chadli, and T. Chouchane, Int. J. Refract. Met. Hard Mater. 70 (2018) 84-92.
  •  
  • 6. N. Wu, F. Xue, H. Yang, H. Zhou, Y. Li, G. Li, and F. Luo, Mater. Today Comm. 25 (2020) 101311.
  •  
  • 7. J. Pornbacher, H. Leitner, P. Angerer, T. Wojcik, S. Marsoner, and G. Ressel, Mater. Charact. 156 (2019) 109880.
  •  
  • 8. I.J. Shon, J. Ceram. Process. Res. 17[8] (2016) 789-794.
  •  
  • 9. I.J. Shon, J. Ceram. Process. Res. 17[5] (2016) 507-512.
  •  
  • 10. B.W. Kwak, B.S. Kim, and I.J. Shon, J. Ceram. Process. Res. 16[3] (2015) 346-351.
  •  
  • 11. N.M. Parikh and M.JR. Humenik, J. Am. Ceram. Soc. 40[9] (1957) 315-320.
  •  
  • 12. Y. Li, N. Liu, X. Zhang, and C. Rong, Int. J. Refract. Met. Hard Mater., 26[3] (2008) 190-196.
  •  
  • 13. H.O. Andren, Mater. Des. 22[6] (2001) 491-498.
  •  
  • 14. J. Song, Y. Liu, C. Pang, J. Zhang, L. Chen, X. Zhang, S. Guo, X. Wang, R. Wang, and A. Chen, J. Ceram. Process. Res. 19[2] (2018) 142-145.
  •  
  • 15. S.H. Ko, W.S. Lee, J.M. Jang, B.H. Cha, and J.S. Seo, J. Ceram. Process. Res. 13[S1] (2012) 105-109.
  •  
  • 16. C. Suryanarayana, Research 2019 (2019) 1-17.
  •  
  • 17. A.I. Gusev and A.S. Kurlov, Nanotechnology 19 [26] (2008) 265302.
  •  
  • 18. I. Topcu, J. Ceram. Process. Res. 22[3] (2021) 276-282.
  •  
  • 19. E. S. Lee, S. K. Park and Y. H. Park, J. Ceram. Process. Res. 16[4] (2015) 380-384.
  •  
  • 20. J. Hernandez, J. Zarate and G. Rosas, J. Ceram. Process. Res. 10[2] (2009) 144-147.
  •  
  • 21. H. Hosokawa, K. Kato, K. Shimojima, and A. Matsumoto, Mater. Trans. 50[1] (2009) 117-122.
  •  
  • 22. M. Bouleghlem, M. Zahzouh, M. Hamidouche, A. Boukhobaz, and M. Fellah, Int. J. Eng. Res. Africa 45 (2019) 1-14.
  •  
  • 23. V.D. Mote, Y. Purushotham, and B.N. Dole, J. Theoretical and Appl. Phys. 6 (2015) 6.
  •  
  • 24. B. Poon, D. Rittel, and G. Ravichandran, Int. J. Solids and Structures 45[24] (2008) 6018-6033.
  •  
  • 25. D. Bandyopadhyay, B. Haldar, R.C. Sharma, and N. Carkraborti, J. Phase of Equilibria 20[3] (1999) 332-336.
  •  
  • 26. W. Acchar and C.A. Cairo, Mat. Res. 9[2] (2006) 171-174.
  •  
  • 27. N. Loudjani, N. Bensebaa, L. Dekhil, S. Alleg, and J.J. Sunol, J. Magnetism and Magnetic Mater. 323[23] (2011) 3063-3070.
  •  
  • 28. S. Han, L. Zhao, Q. Jiang, and J. Lian, Sci. Reports 2 (2012) 493.
  •  
  • 29. H. Dutta, A. Sen, J. Bhattaharjee, and S.K. Pradhan, J. Alloys, and Compd. 493[1-2] (2010) 666-671.
  •  
  • 30. J.H. Lee, I.H. Oh, J.H. Jang, J.H. Kim, S.K. Hong, and H.K. Park, Met. Mater. Int. 9[2] (2020) 2247-2258.
  •  
  • 31. S. Jia, A.J. Williams, P.W. Stephens, and R.J. Cava, Phys. Rev. B 80 (2009) 165107.
  •  
  • 32. M.E. Sherif, J. Saida, and A. Inoue, Acta Mater. 50[10] (2002) 2725-2736.
  •  
  • 33. F. Zhou, X. Liao, Y.T. Zhu, S. Dallek, and E. Lavernia, Acta Mater. 51[10] (2003) 2777-2791.
  •  
  • 34. L. Boatemaa, J.C. Brouwer, S. van der Zwaag, and W.G. Sloof, J. Mater. Sci. 53 (2018) 5973-5986.
  •  
  • 35. W. Cao, O.K. Tan, W. Zhu, and B. Jiang, J. Solid State Chem. 155[2] (2000) 320-325.
  •  
  • 36. Y. Peng, H. Miao, and Z. Peng, Int. J. Refrac. Metals and Hard Mater. 39 (2013) 78-89.
  •  
  • 37. J.H. Lee, H.K. Park, J.H. Jang, S.K. Hong, and I.H. Oh, J. Alloys and Compd. 797 (2019) 612-621.
  •  
  • 38. M. Toozandehjani, K.A. Matori, F. Ostovan, S.A. Aziz, and Md. S. Marmat, Materials 10[1] (2017) 1232.
  •  
  • 39. C. Wang, D. Shi, and S. Li, Materials 13[5] (2020) 1256.
  •  
  • 40. A. Bachmaier, M. Kerber, D. Setman, and R. Pippen, Acta Materialia 60[3] (2012) 860-871.
  •  
  • 41. H. Kimura and T. Masumoto, J. Non Crystalline Solids 61-62 (1984) 835-839.
  •  

This Article

  • 2021; 22(5): 590-596

    Published on Oct 31, 2021

  • 10.36410/jcpr.2021.22.5.590
  • Received on Apr 20, 2021
  • Revised on Aug 30, 2021
  • Accepted on Sep 11, 2021

Correspondence to

  • Hyun-Kuk Park

  • Korea Institute of Industrial Technology (KITECH), Smart Mobility Materials and Components R&D Group, 6, Cheomdan-gwagiro 208-gil, Buk-gu, Gwang-Ju, 61012, Korea
    Tel : +82 62 600 6270

  • E-mail: hk-park@kitech.re.kr