Articles
  • Optimization of friction stir welding process parameters on AA 6063-SiC-B4C hybrid metal matrix composites by genetic algorithm

  • R. Srinivasana, B. Suresh Babub,*, P. Prathapc, Ruban Whenishd, R. Soundararajane and G. Chandramohanf

  • aProfessor, Department of Mechanical Engineering, Sri Krishna College of Technology, Coimbatore, Tamil Nadu, India
    bAssistant Professor, Department of Mechanical Engineering, Sri Krishna College of Technology, Coimbatore, Tamil Nadu, India
    cProfessor, Department of Mechanical Engineering, Sri Krishna College of Technology, Coimbatore, Tamil Nadu, India
    dApplication Engineer, Manna chemicals and Drugs Private Limited, Chennai, Tamil Nadu, India
    eAssociate Professor, Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, Tamil Nadu, India
    fProfessor, Department of Mechanical Engineering, P.S.G Institute of Technology and Applied Research, Coimbatore, Tamilnadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. K.K. Chawla, in “Composite materials: science and en- gineering” (Springer, 2012) p.1.
  •  
  • 2. M.K. Surappa, Sadhana 28[1-2] (2003) 319-334.
  •  
  • 3. S.V. Prasad and R. Asthana, Tribo. Let. 17[3] (2004) 445-453.
  •  
  • 4. T. Miyajima, and Y. Iwai, Wear 255[1-6] (2003) 606-616.
  •  
  • 5. C.S.Ramesh, R. Keshavamurthy, B. H. Channabasappa, and Abrar Ahmed, Mater. Sci. and Eng: A 502[1-2] (2009) 99-106.
  •  
  • 6. S.P. Dwivedi, J. Mech. Sci. Tech. 28[1] (2014) 285-291.
  •  
  • 7. K. Kalaiselvan, N. Murugan, and S. Parameswaran, Mater. Des. 32[7] (2011) 4004-4009.
  •  
  • 8. P. Pugalenthi, M. Jayaraman, and V. Subburam, Materiali in tehnologije 53[1] (2019) 49-55.
  •  
  • 9. V.C. Uvaraja, N. Natarajan, K. Sivakumar, S. Jegadheeshwaran, and S. Sudhakar, Indian J. Eng. Mater. Sci. 22[1] (2015) 51-61.
  •  
  • 10. W.B. Lee, Y.M. Yeon, and S.B. Jung, Scripta. Materi. 49[5] (2003) 423-428.
  •  
  • 11. Y. Lin, J. Hung, H. Chow, and A.C. Wang, J. Ceram. Process Res. 16[2] (2015) 249-257.
  •  
  • 12. T. Sakthivel, G.S. Sengar and J. Mukhopadhyay, The Int. J. Ad. Manuf. Tech. 43[5-6] (2009) 468-473.
  •  
  • 13. Y. Li, D. Sun, and W. Gong, Metals 9[8] (2019) 894.
  •  
  • 14. U. Acharya, B.S. Roy, and S.C. Saha, Defen. Tech. 16[2] (2020) 381-391.
  •  
  • 15. H. Park, H. Youn, J. Ryu, H. Son, H. Bang, I. Shon, and I. Oh, J. Ceram. Process Res. 13[6] (2012) 705-712.
  •  
  • 16. C. Sharma, D.K. Dwivedi, and P. Kumar, Mater. Des. 36 (2012) 379-390.
  •  
  • 17. S.O. Salih, N. Neate, H. Ou, and W. Sun, J. Mater. Process. Tech. 275 (2020) 116366.
  •  
  • 18. A.M. Faradonbeh, M. Shamanian, H. Edris, M. Paidar, and Y. Bozkurt, J. Mater. Eng. Perf. 27[2] (2018) 835-846.
  •  
  • 19. K.K. Ramachandran, N. Murugan, and S. Shashi Kumar, The Int. J. Ad. Manuf. Tech. 86[9-12] (2016) 2373-2392.
  •  
  • 20. P. Jayaseelan, T.V. Christy, P.G. Rubesh, and R. Srinivasan, J. Comp. Theo. Nanoscience 16[2] (2019) 719-724.
  •  
  • 21. W.H. Ho, J.T. Tsai, J.H. Chou, and J.B. Yue, IEEE Access 4 (2016) 2304-2313.
  •  
  • 22. K. Elangovan and V. Balasubramanian, Mater. Des. 29[2] (2008) 362-373.
  •  
  • 23. B.S. Babu, G. Chandramohan, C. Boopathi, T. Pridhar, and R. Srinivasan, J. Ceram. Process Res. 19[1] (2018) 69-74.
  •  
  • 24. R. Whenish, B Sureshbabu, A Johnrajan, R Srinivasan, S N. kumar, A Kavitharan, C Pandikrishna and S Ragupathi, IOP Conf. Ser.: Mater. Sci. Eng. 988 (2020) 012063.
  •  
  • 25. S. Lezhnev, D. Kuis, A. Volochko, A. Shegidevich, N. Svidunovich, and A. Naizabekov, J. Mater. Sci. Eng. 4[3] (2015) 3-5.
  •  
  • 26. M. Dehghani, A. Amadeh, and S.A.A. Akbari Mousavi, Mater. Des. 49 (2013) 433-441.
  •  
  • 27. K.K. Babu, K. Panneerselvam, P. Sathiya, A.N. Haq, S. Sundarrajan, P. Mastanaiah, and C.V.S. Murthy, Int. J. Adv. Manuf. Technol. 94 (2018) 3117-3129.
  •  

This Article

  • 2021; 22(1): 16-24

    Published on Feb 28, 2021

  • 10.36410/jcpr.2021.22.1.16
  • Received on Mar 31, 2020
  • Revised on Aug 23, 2020
  • Accepted on Nov 11, 2020

Correspondence to

  • B. Suresh Babu

  • Assistant Professor, Department of Mechanical Engineering, Sri Krishna College of Technology, Coimbatore, Tamil Nadu, India
    Tel : +91-9360556961

  • E-mail: babusrptc@yahoo.co.in