Xiubin Zhaoa, Shuang Zhanga, Jinsong Lia, Ailin Xiaa,* and Yujie Yangb
aSchool of Materials Science and Engineering, Anhui University of Technology, Maanshan 243002, China
bSchool of Materials Science and Engineering, Anhui University, Hefei 230601, China
This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
M-type ferrite Sr0.1Ca0.4La0.5Fe12O19 magnetic powders doped with CoxFe3-xO4 (0 ≤ x ≤ 1.25) in precursors were prepared by a ceramics process. The structure of specimens were examined by using an X-ray diffractometer. Only the magnetoplumbite phase was found in the specimens with the cobalt content (x) from 0.25 to 1.25 in precursor. The specimens exhibited a typical hexagonal M-type structure and the particles in specimens were uniformly distributed in size. The specimen with x=1.25 had the maximum saturation magnetization of 67.48 emu/g, while the residual magnetization and the coercivity of the specimen with x=1.00 reached the maximum value of 31.83 emu/g and 1270 Oe, respectively
Keywords: M-type ferrite, Cobalt content, Ceramic method, Magnetic properties
2023; 24(1): 98-102
Published on Feb 28, 2023
School of Materials Science and Engineering, Anhui University of Technology, Maanshan 243002, China
Tel : +86 13665557919 Fax: +86 05552311570